AM8833-0D01-0100
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-0D02-0050
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake, with sealing air connection
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-0D10-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-0D10-0030
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-0D10-2040
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1,25A, Nn=3000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
4 meter cable - direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8833-0D11-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-0D20-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-0D20-0020
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
2 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-0D20-2050
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8833-0D20-2100
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8833-0D20-3090
|
Stainless steel servomotor, 400..480V,
Mo=1,85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
9 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8833-0D20-3100
|
Stainless steel servomotor, 400..480V,
Mo=1,85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8833-0D20-3110
|
Stainless steel servomotor, 400..480V,
Mo=1,85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
11 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8833-0D20-3120
|
Stainless steel servomotor, 400..480V,
Mo=1,85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
12 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8833-0D21-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-0D21-2050
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8833-0D21-2100
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8833-0D21-3100
|
Stainless steel servomotor, 400..480V,
Mo=1,85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8833-0DH1-2050
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
smooth shaft
shaft seal IP 69K
with holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8833-1D00-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
2 cable standard, feedback resolver
shaft with feather key
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-1D00-1001
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
2 cable standard, feedback resolver
shaft with feather key
without holding brake
2 meter cable with standard coupling
sonder version -1001:
- sonder ball bearing with LLB SO MOV Longlife Grade 0
- shaft seal IP65 (FKM)
- sonder winding with resolver harrowe 15BRCX-600-J12TA
- sonder winding with betaterm wire
|
Beckhoff Vietnam
|
AM8833-1D10-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-1D10-0030
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-1D10-2030
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
3 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8833-1D10-2050
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8833-1D20-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-1D20-2050
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8833-1D20-3050
|
Stainless steel servomotor, 400..480V,
Mo=1,85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
5 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8833-1D20-3100
|
Stainless steel servomotor, 400..480V,
Mo=1,85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8833-1D21-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8833-1DH0-2050
|
Stainless steel servomotor, 400..480V,
Mo=1.85Nm, Io=1.25A, Nn=3000 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
shaft with feather key
shaft seal IP 69K
without holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8841-0C00-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C00-0050
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C00-0100
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C00-0200
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
20 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C01-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C10-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C10-0030
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C11-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C11-3010
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1,1A, Nn=3000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable - direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8841-0C20-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C20-0200
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
20 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C20-2150
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
15 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8841-0C21-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C21-0090
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
9 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C21-0100
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C21-0130
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
13 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C21-0140
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
14 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C22-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake, with sealing air connection
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-0C23-1004
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake, with sealing air connection
sonder version -1004:
- 2m cable with M23 coupling
with corrugated protection hose (PVC)
|
Beckhoff Vietnam
|
AM8841-0C23-2150
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake, with sealing air connection
15m cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8841-0CH1-2050
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
smooth shaft
shaft seal IP 69K
with holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8841-0CH1-2070
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
smooth shaft
shaft seal IP 69K
with holding brake
7 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8841-0CH1-2200
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
smooth shaft
shaft seal IP 69K
with holding brake
20 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8841-1C20-0010
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-1C20-0040
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
4 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8841-1C20-2040
|
Stainless steel servomotor, 400..480V,
Mo=1.6Nm, Io=1.1A, Nn=3000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
4 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8842-0D00-0010
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D00-0020
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
2 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D01-0010
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D01-0050
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D01-0100
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D10-0010
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D10-2100
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8842-0D10-3010
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable - direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8842-0D10-3100
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable - direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8842-0D11-0010
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D20-0010
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D20-0030
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D20-2050
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with sdirect connection AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8842-0D21-0010
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-0D21-2100
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with direct connection for AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8842-0D22-2100
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake, with sealing air connection
10 meter cable with direct connection for AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8842-0F21-1001
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=3.5A, Nn=5000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
without shaft seal
with holding brake
1 meter cable with standard coupling
sonder version -1001:
- special winding "F" with 5000 rpm
- without shaft seal
- special shaft 16x40mm
|
Beckhoff Vietnam
|
AM8842-0F21-1002
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=3.5A, Nn=5000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
without shaft seal
with holding brake
1 meter cable with standard coupling
sonder version -1002:
- special winding "F" with 5000 rpm
- without shaft seal
|
Beckhoff Vietnam
|
AM8842-1D10-0100
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
10 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8842-1D10-2100
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8842-1D20-3100
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
10 meter cable - direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8842-1D23-0010
|
Stainless steel servomotor, 400..480V,
Mo=2.6Nm, Io=1.6A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake, with sealing air connection
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E00-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E00-0030
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E01-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E10-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E10-0030
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback singleturn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E10-0100
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E10-2020
|
Stainless steel servomotor, 400..480V,
Mo=3,5Nm, Io=1,90A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
2 meter cable - direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E10-2040
|
Stainless steel servomotor, 400..480V,
Mo=3,5Nm, Io=1,90A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
4 meter cable - direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E10-2100
|
Stainless steel servomotor, 400..480V,
Mo=3.45Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E10-2120
|
Stainless steel servomotor, 400..480V,
Mo=3.45Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
12 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E11-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E20-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E20-0050
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E20-2030
|
Stainless steel servomotor, 400..480V,
Mo=3.50Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E20-2040
|
Stainless steel servomotor, 400..480V,
Mo=3.50Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
4 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E20-2050
|
Stainless steel servomotor, 400..480V,
Mo=3.50Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E20-2100
|
Stainless steel servomotor, 400..480V,
Mo=3,5Nm, Io=1.9A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E20-2150
|
Stainless steel servomotor, 400..480V,
Mo=3,5Nm, Io=1.9A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
15 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E21-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E21-0030
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E21-0040
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
4 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-0E21-1001
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
with holding brake
1 meter cable with standard coupling
sonder version -1001:
- shaft without shaft sealing
- Multivac logo
- Multivac ID 106766590
|
Beckhoff Vietnam
|
AM8843-0E21-2050
|
Stainless steel servomotor, 400..480V,
Mo=3.50Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E21-2100
|
Stainless steel servomotor, 400..480V,
Mo=3.50Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0E21-3100
|
Stainless steel servomotor, 400..480V,
Mo=3.50Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8843-0E21-3150
|
Stainless steel servomotor, 400..480V,
Mo=3.50Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
15 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8843-0E22-2100
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake, with sealing connection
10 meter cable with direct connection for AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-0F00-1001
|
Stainless steel servomotor, 400..480V,
Mo=3.40Nm, Io=3.54A, Nn=5000 rpm
2 cable standard, feedback resolver
smooth shaft
without holding brake
3 meter cable with standard coupling
sonder version -1001:
- without shaft seal IP 69K
|
Beckhoff Vietnam
|
AM8843-1E01-0050
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
2 cable standard, feedback resolver
shaft with feather key
shaft seal IP 69K
with holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-1E10-0020
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
2 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-1E10-2100
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback singleturn
shaft with feather key
shaft seal IP 69K
without holding brake
10 meter cable with direct connection for AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8843-1E12-0020
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake, with sealing air connection
2 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-1E20-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-1E20-0020
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
2 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-1E20-0050
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-1E20-0100
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
10 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-1E21-0050
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-1E22-0020
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake, with sealing connection
2 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8843-1E22-0100
|
Stainless steel servomotor, 400..480V,
Mo=3.5Nm, Io=1.90A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake, with sealing connection
10 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D00-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D00-0050
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D01-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D01-0030
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D01-0100
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D01-1001
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
2 cable standard, feedback resolver
smooth shaft
with holding brake
special version -1001:
- special shaft with pinion for Bauer gearbox BGA-BK17-74VH-N
- shaft seal IP65 (FKM)
- sealing ring for gearbox mounting on BK17 bevel gearbox
- 2 meter cable with M23 coupling (8 pole / power)
- 2 meter cable with M23 coupling (12 pole / feedback)
|
Beckhoff Vietnam
|
AM8851-0D10-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D11-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D20-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D20-0030
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D20-0050
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D20-3100
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8851-0D20-3150
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
15 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8851-0D21-0010
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0D21-0030
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8851-0DH1-2030
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
smooth shaft
shaft seal IP 69K
with holding brake
3 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8851-0DH1-2050
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
smooth shaft
shaft seal IP 69K
with holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8851-0E21-1001
|
Stainless steel servomotor, 400..480V,
Mo=3,1Nm, Io=3,9A, Nn=5000 1/min
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
3 meter cable with standard coupling
Options such as radial shaft seal can lead
to a reduction of rated data.
Sonder version -1001 as follows:
- winding code E (see technical date)
- 3m cable
- 19x40mm shaft diameter/length
|
Beckhoff Vietnam
|
AM8851-0E21-1002
|
Stainless steel servomotor, 400..480V,
Mo=3,1Nm, Io=3,9A, Nn=5000 1/min
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
Options such as radial shaft seal can lead
to a reduction of rated data.
Special version -1002 as follows:
- winding code "E" (see technical data)
- 15 meter cable with ZS4500-2013+ZS4500-2014 connector
|
Beckhoff Vietnam
|
AM8851-0E21-1003
|
Stainless steel servomotor, 400..480V,
Mo=3,1Nm, Io=3,9A, Nn=5000 1/min
One Cable Technology, feedback multi-turn
smooth shaft
with holding brake
shaft seal IP 69K
Options such as radial shaft seal can lead
to a reduction of rated data.
Special version -1003 as follows:
- 2 meter cable with M23 coupling 9 pole
- shaft diameter 19mm
- winding code "E" with 5000 1/min
- Multivac logo
|
Beckhoff Vietnam
|
AM8851-1D10-3050
|
Stainless steel servomotor, 400..480V,
Mo=3.1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
5 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8851-1D21-1001
|
Stainless steel servomotor, 400..480V,
Mo=3,1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
7 meter cable with standard coupling
special version -1001:
- red. shaft 11x30mm
|
Beckhoff Vietnam
|
AM8851-1D21-1002
|
Stainless steel servomotor, 400..480V,
Mo=3,1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
7 meter cable with direct connection AX5000 (X13+X14)
special version -1002:
- red. shaft 11x30mm
|
Beckhoff Vietnam
|
AM8851-1D21-1003
|
Stainless steel servomotor, 400..480V,
Mo=3,1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
10 meter cable with direct connection AX5000 (X13+X14)
special version -1003:
- red. shaft 11x30mm
|
Beckhoff Vietnam
|
AM8851-1D21-2050
|
Stainless steel servomotor, 400..480V,
Mo=3,1Nm, Io=1.8A, Nn=2500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
5 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8852-0E00-0010
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8852-0E01-0010
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8852-0E10-0010
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8852-0E11-0010
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8852-0E20-0010
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8852-0E20-0030
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8852-0E21-0010
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8852-0E22-2100
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake, with sealing air connection
10 meter cable with direct connection for AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8852-0F21-0010
|
Stainless steel servomotor, 400..480V,
Mo=4.5Nm, Io=3.5A, Nn=4000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8852-1E01-0050
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
2 cable standard, feedback resolver
shaft with feather key
shaft seal IP 69K
with holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8852-1E11-2100
|
Stainless steel servomotor, 400..480V,
Mo=4.8Nm, Io=2.1A, Nn=2000 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
with holding brake
10 meter cable with direct connection for AX5000 (X13+X14/X23/X24)
|
Beckhoff Vietnam
|
AM8853-0F00-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0F01-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0F01-0030
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0F10-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0F10-3050
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with direct connection to AX8000 (X13)
|
Beckhoff Vietnam
|
AM8853-0F11-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0F20-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0F20-0030
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0F20-0050
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0F20-2030
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8853-0F20-2050
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8853-0F20-2100
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8853-0F20-2180
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
18 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8853-0F21-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0F21-2050
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
5 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8853-0F22-2100
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake, with sealing air connection
10 meter cable with direct connection for AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8853-0FH1-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-0FH1-2070
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
smooth shaft
shaft seal IP 69K
with holding brake
7 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8853-0FH1-3070
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
smooth shaft
shaft seal IP 69K
with holding brake
7 meter cable with direct connection for AX8000 (X13)
|
Beckhoff Vietnam
|
AM8853-0H01-1001
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=8.8A, Nn=4000 rpm
2 cable standard, feedback resolver
smooth shaft
with holding brake
3 meter cable with standard coupling
sonder version -1001:
- without shaft seal IP 69K
|
Beckhoff Vietnam
|
AM8853-1F00-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
2 cable standard, feedback resolver
shaft with feather key
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-1F00-1001
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
2 cable standard, feedback resolver
shaft with feather key
without holding brake
special version -1001:
- shaft seal IP65 (FKM)
- sonder winding with betaterm wire
- 2m cable with M23 coupling
- sonder resolver Harrowe 15BRCX-600-J12TA
- sonder bearing LLB SO MOV Longlife Grade 0
|
Beckhoff Vietnam
|
AM8853-1F10-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-1F11-0010
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8853-1F20-2050
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake
5 meter cable with direct connection for AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8853-1F21-0030
|
Stainless steel servomotor, 400..480V,
Mo=6.4Nm, Io=2.8A, Nn=2000 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8861-0E10-0010
|
Stainless steel servomotor, 400..480V,
Mo=7.75Nm, Io=2.53A, Nn=1500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8861-0E10-2010
|
Stainless steel servomotor, 400..480V,
Mo=7.75Nm, Io=2.53A, Nn=1500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8861-0E10-2030
|
Stainless steel servomotor, 400..480V,
Mo=7.75Nm, Io=2.53A, Nn=1500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
3 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8861-0E11-0010
|
Stainless steel servomotor, 400..480V,
Mo=7.75Nm, Io=2.53A, Nn=1500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8861-0E12-0010
|
Stainless steel servomotor, 400..480V,
Mo=7.75Nm, Io=2.53A, Nn=1500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake, with sealing air connection
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8861-0E22-2050
|
Stainless steel servomotor, 400..480V,
Mo=7.75Nm, Io=2.53A, Nn=1500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake, with sealing air connection
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8861-1E10-0050
|
Stainless steel servomotor, 400..480V,
Mo=7.75Nm, Io=2.53A, Nn=1500 rpm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8861-1E22-2050
|
Stainless steel servomotor, 400..480V,
Mo=7.75Nm, Io=2.53A, Nn=1500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
without holding brake, with sealing air connection
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8862-0F10-0010
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8862-0F11-0050
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
with holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8862-0F20-2050
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
5 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8862-0F21-2030
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=3.7A, Nn=1500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake
3 meter cable with direct connection for AX5000
|
Beckhoff Vietnam
|
AM8862-0F23-1001
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake, with sealing air connection
sonder version -1001:
- 19 meter cable (PVC, for fixed installation)
with direct connection to AX5000 (X13+X14)
- 14 meter corrugated protection hose (PVC)
|
Beckhoff Vietnam
|
AM8862-0F23-2190
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
with holding brake, with sealing air connection
19 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8862-1F10-2100
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8862-1F11-0030
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
with holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8862-1F11-0050
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
with holding brake
5 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8862-1F11-1001
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
with holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
Sonder version -1001:
- red. shaft 24x50mm
|
Beckhoff Vietnam
|
AM8862-1F11-2100
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback single-turn
shaft with feather key
shaft seal IP 69K
with holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8862-1F21-0010
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8862-1F21-0030
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
3 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8862-1F21-0160
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
16 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8862-1F23-0160
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake, with sealing air connection
16 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8862-1FH1-0070
|
Stainless steel servomotor, 400..480V,
Mo=13.1Nm, Io=4.1A, Nn=1500 rqm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
shaft with feather key
shaft seal IP 69K
with holding brake
7 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8863-0G01-2100
|
Stainless steel servomotor, 400..480V,
Mo=16.7Nm, Io=4.9A, Nn=1500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8863-0G01-2200
|
Stainless steel servomotor, 400..480V,
Mo=16.7Nm, Io=4.9A, Nn=1500 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
20 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8863-0G10-0010
|
Stainless steel servomotor, 400..480V,
Mo=16.7Nm, Io=4.9A, Nn=1500 rpm
One Cable Technology, feedback single-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8863-0G20-0010
|
Stainless steel servomotor, 400..480V,
Mo=16.7Nm, Io=4.9A, Nn=1500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
1 meter cable with standard coupling
|
Beckhoff Vietnam
|
AM8863-0G20-2100
|
Stainless steel servomotor, 400..480V,
Mo=16.7Nm, Io=4.9A, Nn=1500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8863-0G22-2100
|
Stainless steel servomotor, 400..480V,
Mo=16.7Nm, Io=4.9A, Nn=1500 rpm
One Cable Technology, feedback multi-turn
smooth shaft
shaft seal IP 69K
without holding brake, with sealing air connection
10 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8863-0M01-1001
|
Stainless steel servomotor, 400..480V,
Mo=17.5Nm, Io=13.8A, Nn=3000 rpm
2 cable standard, feedback resolver
smooth shaft
shaft seal IP 69K
with holding brake
2 meter cable with coupling
sonder version -1001:
- shaft: gear teeth N32x0,8x38x7h / DIN5480
- motor connector M23 / 8-pole
- feedback connector M23 / 12-pole
- Kollmorgen compatible
|
Beckhoff Vietnam
|
AM8863-1G21-2050
|
Stainless steel servomotor, 400..480V,
Mo=16.7Nm, Io=4.9A, Nn=1500 rpm
One Cable Technology, feedback multi-turn
shaft with feather key
shaft seal IP 69K
with holding brake
5 meter cable with direct connection to AX5000 (X13+X14)
|
Beckhoff Vietnam
|
AM8863-1GH1-0070
|
Stainless steel servomotor, 400..480V,
Mo=16.7Nm, Io=4.9A, Nn=1500 rpm
One Cable Technology, feedback multi-turn 24bit (High Resolution), SIL 2
shaft with feather key
shaft seal IP 69K
with holding brake
7 meter cable with standard coupling
|
Beckhoff Vietnam
|
AMP8042-E021-0000
|
Distributed servo drive 560V DC
Mo=3.90Nm, Io=2.05A, Nn=2500 1/min
smooth shaft
feedback multi-turn 24Bit
TwinSAFE: STO/SS1, integrated TwinSAFE-Logic
with holding brake
|
Beckhoff Vietnam
|
AS1010-0000
|
stepper motor 24/50VDC
Nominal power 8.4W
2 phases, bipolar winding, 200 steps
Mo=0.38Nm, Io=1A, IP43, M12-connector
dimension: flange 42mm, shaft 5mm, length 39mm
(length without shaft)
|
Beckhoff Vietnam
|
AS1020-0000
|
stepper motor 24/50VDC
Nominal power 10W
2 phases, bipolar winding, 200 steps
Mo=0.5Nm, Io=1A, IP43, M12-connector
dimension: flange 42mm, shaft 5mm, length 48mm
(length without shaft)
|
Beckhoff Vietnam
|
AS1020-0100
|
stepper motor 24/50VDC
Nominal power 10W
2 phases, bipolar winding, 200 steps
Mo=0.5Nm, Io=1A, IP43, M12-connector
with 2nd shaft end 5mm
dimension: flange 42mm, shaft 5mm, length 81mm
(length without shaft, inclusive second shaft end)
|
Beckhoff Vietnam
|
AS1020-0110
|
stepper motor 24/50VDC
Nominal power 10W
2 phases, bipolar winding, 200 steps
Mo=0.5Nm, Io=1A, IP43, M12-connector
with incremental encoder 200 inc/rev
wiht second shaft 5mm
dimension: flange 42mm, shaft 5mm, length 81mm
(length without shaft, inclusive second shaft end with encoder)
|
Beckhoff Vietnam
|
AS1020-0120
|
stepper motor 24/50VDC
Nominal power 10W
2 phases, bipolar winding, 200 steps
Mo=0.5Nm, Io=1A, IP43, M12-connector
with incremental encoder 1024 inc/rev
with second shaft 5mm
dimension: flange 42mm, shaft 5mm, length 81mm
(length without shaft, inclusive second shaft end with encoder)
|
Beckhoff Vietnam
|
AS1020-0160-1001
|
stepper motor 24/50VDC
Nominal power 10W
2 phases, bipolar winding, 200 steps
Mo=0.5Nm, Io=1A, IP43, M12-connector
with incremental encoder 3600 inc/rev
with second shaft 5mm
dimension: flange 42mm, shaft 5mm, length 81mm
(length without shaft, inclusive second shaft end with encoder)
|
Beckhoff Vietnam
|
AS1030-0000
|
stepper motor 24/50 VDC
Nominal power 19.5W
2 phases, bipolar winding, 200 steps
Mo=0.6Nm, Io=1.5A, IP43, M12-connector
dimension: flange 56mm, shaft 6.35mm,length 54mm
(length without shaft)
|
Beckhoff Vietnam
|
AS1030-0000+AG2100-+CP040-M02-035-111
|
Customer specific motor-gearbox combination Aixtron
AS1030-0000 stepper motor 24/50 VDC
Nominal power 19.5W
2 phases, bipolar winding, 200 steps
Mo=0.6Nm, Io=1.5A, IP43, M12-connector
with mounted planetary gear AG2100-+CP040-M02-035-111
Price incl. mounting
|
Beckhoff Vietnam
|
AS1050-0000
|
stepper motor 24/50 VDC
Nominal power 27.5W
2 phases, bipolar winding, 200 steps
Mo=1.2Nm, Io=5A, IP43, M12-connector
dimension:flange 56mm, shaft 6.35mm,length 75.8mm
(length without shaft)
|
Beckhoff Vietnam
|
AS1050-0100
|
stepper motor 24/50 VDC
Nominal power 27.5W
2 phases, bipolar winding, 200 steps
Mo=1.2Nm, Io=5A, IP43, M12-connector
with second shaft end 6mm
dimension: flange 56mm, shaft 6.35mm, length 90.8mm
(length without shaft, inclusive second shaft)
|
Beckhoff Vietnam
|
AS1050-0110
|
stepper motor 24/50 VDC
Nominal power 27.5W
2 phases, bipolar winding, 200 steps
Mo=1.2Nm, Io=5A, IP43, M12-connector
with incremental encoder 200 inc/rev
with second shaft 6mm
dimension:flange 56mm,shaft 6.35mm,length 108.8mm
(length without shaft, inclusive second shaft end with encoder)
|
Beckhoff Vietnam
|
AS1050-0120
|
stepper motor 24/50 VDC
Nominal power 27.5W
2 phases, bipolar winding, 200 steps
Mo=1.2Nm, Io=5A, IP43, M12-connector
with incremental encoder 1024 inc/rev
dimension: flange 56mm, shaft 6.35mm, length 108.8mm
(length without shaft, inclusive second shaft with encoder)
|
Beckhoff Vietnam
|
AS1055-0110
|
stepper motor 24/50 VDC
2 phases, bipolar winding, 200 steps
Mo=1.7Nm, Io=3A, IP65, M12-connector
with incremental encoder 200 inc/rev
dimension: flange 56mm, shaft 6.35mm, length 110mm
|
Beckhoff Vietnam
|
AS1059-0120-1001
|
stepper motor 24/50 VDC
2 phases, bipolar winding, 200 steps
Mo=1.4Nm, Io=2.8A, IP43, M12-connector
with incremental encoder 1024 inc/rev
dimension: flange 56mm, shaft 6.35mm, length 94mm
(length without shaft, inclusive second shaft with encoder)
|
Beckhoff Vietnam
|
AS1060-0000
|
stepper motor 24/50VDC
Nominal power 68.8W
2 phases, bipolar winding, 200 steps
Mo=5Nm, Io=5A, IP20, M12-connector
dimension: flange 85.5mm, shaft 14mm, length 96.5mm
(length without shaft)
|
Beckhoff Vietnam
|
AS1060-0100
|
stepper motor 24/50 VDC
Nominal power 68.8W
2 phases, bipolar winding, 200 steps
Mo=5Nm, Io=5A, IP20, M12-connector
with 2nd shaft end 6 mm
dimension: flange 86mm, shaft 14mm, length 111.5mm
(length without shaft, inclusive second shaft end)
|
Beckhoff Vietnam
|
AS1060-0110
|
stepper motor 24/50 VDC
Nominal power 68.8W
2 phases, bipolar winding, 200 steps
Mo=5Nm, Io=5A, IP20, M12-connector
with incremental encoder 200 inc/rev
with second shaft 6mm
dimension: flange 85.5mm, shaft 14mm, length 129.5mm
(length without shaft, inclusive second shaft end with encoder)
|
Beckhoff Vietnam
|
AS1060-0120
|
stepper motor 24/50 VDC
Nominal power 68.8W
2 phases, bipolar winding, 200 steps
Mo=5Nm, Io=5A, IP20, M12-connector
with incremental encoder 1024 inc/rev
with second shaft 6mm
dimension: flange 85.5mm, shaft 14mm, length 129.5mm
(length without shaft, inclusive second shaft end with encoder)
|
Beckhoff Vietnam
|
AS1060-1000
|
stepper motor 24/50VDC
Nominal power 68.8W
2 phases, bipolar winding, 200 steps
Mo=5Nm, Io=5A, IP20, M12-connector
shaft with fitted keyway
dimension: flange 86mm, shaft 14mm, length 96.5mm
(length without shaft)
|
Beckhoff Vietnam
|
AS1060-1100
|
stepper motor 24/50 VDC
Nominal power 68.8W
2 phases, bipolar winding, 200 steps
Mo=5Nm, Io=5A, IP20, M12-connector
with 2nd shaft end 6 mm
shaft with feather key
dimension: flange 86mm, shaft 14mm, length 145mm
(length without shaft, inclusive second shaft end)
|
Beckhoff Vietnam
|
AS1060-1110
|
stepper motor 24/50 VDC
Nominal power 68.8W
2 phases, bipolar winding, 200 steps
Mo=5Nm, Io=5A, IP20, M12-connector
with incremental encoder 200 inc/rev
shaft with fitted keyway
with second shaft 6mm
dimension: flange 86mm, shaft 14mm, length 145mm
(length without shaft, inclusive second shaft end with encoder)
|
Beckhoff Vietnam
|
AS1060-1120
|
stepper motor 24/50 VDC
Nominal power 68.8W
2 phases, bipolar winding, 200 steps
Mo=5Nm, Io=5A, IP20, M12-connector
shaft with feather key
second shaft 6mm
with incremental encoder 1024 inc/rev
dimension: flange 86mm, shaft 14mm, length 145mm
(length without shaft, inclusive second shaft end with encoder)
|
Beckhoff Vietnam
|
AS2021-0D00
|
stepper motor 24/50 VDC
Mo=0,8Nm, In=2,0A, IP54, M12-connector
smooth shaft
dimension: NEMA23/56 mm
|
Beckhoff Vietnam
|
AS2021-0D10
|
stepper motor 24/50 VDC
Mo=0,8Nm, In=2,0A, IP54, M12-connector
with incremental encoder 1024 inc/rev
smooth shaft
dimension: NEMA23/56 mm
|
Beckhoff Vietnam
|
AS2022-0H00
|
stepper motor 24/50 VDC
Mo=1,5Nm, In=5,6A, IP54, M12-connector
smooth shaft
dimension: NEMA23/56 mm
|
Beckhoff Vietnam
|
AS2022-0H10
|
stepper motor 24/50 VDC
Mo=1,5Nm, In=5,6A, IP54, M12-connector
with incremental encoder 1024 inc/rev
smooth shaft
dimension: NEMA23/56 mm
|
Beckhoff Vietnam
|
AS2023-0H00
|
stepper motor 24/50 VDC
Mo=1,8Nm, In=5,6A, IP54, M12-connector
smooth shaft
dimension: NEMA23/56 mm
|
Beckhoff Vietnam
|
AS2023-0H10
|
stepper motor 24/50 VDC
Mo=1,8Nm, In=5,6A, IP54, M12-connector
with incremental encoder 1024 inc/rev
smooth shaft
dimension: NEMA23/56 mm
|
Beckhoff Vietnam
|
AS2023-0J00
|
stepper motor 24/50 VDC
Mo=2,3Nm, In=6,4A, IP54, M12-connector
smooth shaft
dimension: NEMA23/56 mm
|
Beckhoff Vietnam
|
AS2023-0J10
|
stepper motor 24/50 VDC
Mo=2,3Nm, In=6,4A, IP54, M12-connector
with incremental encoder 1024 inc/rev
smooth shaft
dimension: NEMA23/56 mm
|
Beckhoff Vietnam
|
AS2041-1H00
|
stepper motor 24/50 VDC
Mo=3,3Nm, In=5,6A, IP54, M12-connector
shaft with feather key
dimension: NEMA34/86 mm
|
Beckhoff Vietnam
|
AS2041-1H10
|
stepper motor 24/50 VDC
Mo=3,3Nm, In=5,6A, IP54, M12-connector
with incremental encoder 1024 inc/rev
shaft with feather key
dimension: NEMA34/86 mm
|
Beckhoff Vietnam
|
AS2042-1H00
|
stepper motor 24/50 VDC
Mo=6,4Nm, In=5,6A, IP54, M12-connector
shaft with feather key
dimension: NEMA34/86 mm
|
Beckhoff Vietnam
|
AS2042-1H10
|
stepper motor 24/50 VDC
Mo=6,4Nm, In=5,6A, IP54, M12-connector
with incremental encoder 1024 inc/rev
shaft with feather key
dimension: NEMA34/86 mm
|
Beckhoff Vietnam
|
AS2043-1J00
|
stepper motor 24/50 VDC
Mo=8,0Nm, In=6,5A, IP54, M12-connector
shaft with feather key
dimension: NEMA34/86 mm
|
Beckhoff Vietnam
|
AS2043-1J10
|
stepper motor 24/50 VDC
Mo=8,0Nm, In=6,5A, IP54, M12-connector
with incremental encoder 1024 inc/rev
shaft with feather key
dimension: NEMA34/86 mm
|
Beckhoff Vietnam
|
AX2090-PS01
|
Power Supply SINCOS for AX2000/2500
if encoder current consumption is >150mA
|
Beckhoff Vietnam
|
AX2090-SD018x044-E2
|
Shrink disc for right angle gearbox HG+060S
material: stainnless steel
|
Beckhoff Vietnam
|
AX2090-SD018x044-S2
|
Shrink disc for right angle gearbox HG+060S
|
Beckhoff Vietnam
|
AX2090-SD024x050-E2
|
Shrink disc for right angle gearbox HG+075S
|
Beckhoff Vietnam
|
AX2090-SD024x050-N2
|
Shrink disc for right angle gearbox HG+075S
material: nickel plated
|
Beckhoff Vietnam
|
AX2090-SD024x050-S2
|
Shrink disc for right angle gearbox HG+075S
|
Beckhoff Vietnam
|
AX2090-SD036x072-E2
|
Shrink disc for right angle gearbox HG+100S
material: stainnless steel
|
Beckhoff Vietnam
|
AX2090-SD036x072-S2
|
Shrink disc for right angle gearbox HG+100S
|
Beckhoff Vietnam
|
AX2090-SD036x072-S2V
|
Shrink disc for right angle gearbox VDH063
|
Beckhoff Vietnam
|
AX2090-SD050x090-S2
|
Shrink disc for right angle gearbox HG+140S
|
Beckhoff Vietnam
|
AX2090-SD050x090-S2V
|
Shrink disc for gearbox VDH080
|
Beckhoff Vietnam
|
AX2090-SD062x110-S2V
|
Shrink disc for gearbox _VH/VDH100
|
Beckhoff Vietnam
|
AX2090-SD068x115-S2
|
Shrink disc for right angle gearbox HG+180S
|
Beckhoff Vietnam
|
AX2090-SD-WGN90
|
Shrink disc for right angle gearbox WGN90
|
Beckhoff Vietnam
|
AX5021-0000-0000
|
ballast unit with internal braking resistor and connection option for
an external ballast resistor (up to 6kw)
additional dc link capacity for save of brake power
|
Beckhoff Vietnam
|
AX5021-0000-0001
|
ballast unit with internal braking resistor and connection option for
an external ballast resistor (up to 6kw)
additional dc link capacity for save of brake power
special coated boards for the use at special ambience conditions
Minimum order qty 25pcs!
In case of service, there is also no possibility to deliver <25pcs!
In case of warranty, there is only the possibility of credit note.
|
Beckhoff Vietnam
|
AX5101-0000-0200
|
Digital Compact Servo Drive, rated current 1.5A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5101-0000-0201
|
Digital Compact Servo Drive, rated current 1.5A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5101-0000-0202
|
Digital Compact Servo Drive, rated current 1.5A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5101-0000-0203
|
Digital Compact Servo Drive, rated current 1.5A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5101-0000-0210
|
Digital Compact Servo Drive, rated current 1.5A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5101-0000-0212
|
Digital Compact Servo Drive, rated current 1.5A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5101-0000-1201
|
Digital Compact Servo Drive, rated current 1.5A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
Customer specific version -1201:
- without X01, X02 and X03 connector
|
Beckhoff Vietnam
|
AX5103-0000-0200
|
Digital Compact Servo Drive, rated current 3A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5103-0000-0201
|
Digital Compact Servo Drive, rated current 3A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5103-0000-0202
|
Digital Compact Servo Drive, rated current 3A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5103-0000-0203
|
Digital Compact Servo Drive, rated current 3A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5103-0000-0210
|
Digital Compact Servo Drive, rated current 3A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5103-0000-0212
|
Digital Compact Servo Drive, rated current 3A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5106-0000-0200
|
Digital Compact Servo Drive, rated current 6A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5106-0000-0201
|
Digital Compact Servo Drive, rated current 6A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5106-0000-0202
|
Digital Compact Servo Drive, rated current 6A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5106-0000-0203
|
Digital Compact Servo Drive, rated current 6A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5106-0000-0210
|
Digital Compact Servo Drive, rated current 6A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5106-0000-0212
|
Digital Compact Servo Drive, rated current 6 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5106-0000-1204
|
Digital Compact Servo Drive, rated current 6A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5112-0000-0200
|
Digital Compact Servo Drive, rated current 12A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5112-0000-0201
|
Digital Compact Servo Drive, rated current 12A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5112-0000-0202
|
Digital Compact Servo Drive, rated current 12A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5112-0000-0203
|
Digital Compact Servo Drive, rated current 12A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5112-0000-0210
|
Digital Compact Servo Drive, rated current 12A,
1-axis drive, 100-480 VAC
EtherCAT Interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5112-0000-0212
|
Digital Compact Servo Drive, rated current 12 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5112-0000-1203
|
Digital Compact Servo Drive, rated current 12A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
special version -1203:
- ID Nagel IDN P-0-0851
- Firmware 2.10 build 0011
|
Beckhoff Vietnam
|
AX5118-0000-0200
|
Digital Compact Servo Drive, rated current 18A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5118-0000-0201
|
Digital Compact Servo Drive, rated current 18A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5118-0000-0202
|
Digital Compact Servo Drive, rated current 18A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5118-0000-0203
|
Digital Compact Servo Drive, rated current 18A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5118-0000-0210
|
Digital Compact Servo Drive, rated current 18A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5118-0000-0212
|
Digital Compact Servo Drive, rated current 18 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5118-0000-1202
|
Digital Compact Servo Drive, rated current 18A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
special version -1202:
- ID Nagel P-0-0851
- Firmware 2.10 build 0011
|
Beckhoff Vietnam
|
AX5125-0000-0200
|
Digital Compact Servo Drive, rated current 25 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5125-0000-0201
|
Digital Compact Servo Drive, rated current 25 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5125-0000-0202
|
Digital Compact Servo Drive, rated current 25 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5125-0000-0203
|
Digital Compact Servo Drive, rated current 25 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5125-0000-0210
|
Digital Compact Servo Drive, rated current 25 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5125-0000-0212
|
Digital Compact Servo Drive, rated current 25 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5125-0000-1201
|
Digital Compact Servo Drive, rated current 25 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
special version -1201:
- ID Nagel IDN P-0-0851
- Firmware 2.10 build 0011
|
Beckhoff Vietnam
|
AX5125-0010-0200
|
Digital Compact Servo Drive, rated current 25 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
Construction as "Cold Plate":
- without additional cooling fans
- solid aluminum heat sink dissipates heat
to the back flange
- customer has to supply external heat sink
to remove heat
- thermal resistance: Rth=
- Attention: Drive has limited peak power!
|
Beckhoff Vietnam
|
AX5140-0000-0200
|
Digital Compact Servo Drive, rated current 40 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5140-0000-0201
|
Digital Compact Servo Drive, rated current 40 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5140-0000-0202
|
Digital Compact Servo Drive, rated current 40 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5140-0000-0203
|
Digital Compact Servo Drive, rated current 40 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5140-0000-0210
|
Digital Compact Servo Drive, rated current 40 A,
1-axis drive, 100-480 VAC
EtherCAT onterface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5140-0000-0212
|
Digital Compact Servo Drive, rated current 40 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5140-0000-1201
|
Digital Compact Servo Drive, rated current 40 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
special version -1201:
- ID Nagel IDN P-0-0851
- Firmware 2.10 build 0011
|
Beckhoff Vietnam
|
AX5140-0000-1203
|
Digital Compact Servo Drive, rated current 40 A,
1-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >=2.10
0-2000 Hz
special version -1203:
- rotating field frequency up to 2000 Hz
|
Beckhoff Vietnam
|
AX5160-0000-0200
|
Digital Compact Servo Drive, rated current 60A,
1-axis drive,3x400-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
OCT (One Cable Technology) not supported
compatibel with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5160-0000-0202
|
Digital Compact Servo Drive, rated current 60 A,
1-axis drive, 3x400-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5160-0000-0210
|
Digital Compact Servo Drive, rated current 60A,
1-axis drive,3x400-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
OCT (One Cable Technology) not supported
compatibel with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5160-0000-0212
|
Digital Compact Servo Drive, rated current 60 A,
1-axis drive, 3x400-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5160-0000-1201
|
Digital Compact Servo Drive, rated current 60A,
1-axis drive,3x400-480 VAC
EtherCAT interface
integrated mains filter
0-599 Hz
OCT (One Cable Technology) not supported
compatibel with the following TwinSAFE products:
AX5806-0000
special version -1203:
- ID Nagel P-0-0851
- Firmware 2.10 build 0011
|
Beckhoff Vietnam
|
AX5172-0000-0200
|
Digital Compact Servo Drive, rated current 72A,
1-axis drive,3x400-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5172-0000-0202
|
Digital Compact Servo Drive, rated current 72A,
1-axis drive,3x400-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5172-0000-0210
|
Digital Compact Servo Drive, rated current 72A,
1-axis drive,3x400-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5172-0000-0212
|
Digital Compact Servo Drive, rated current 72 A,
1-axis drive, 3x400-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5190-0000-0200
|
Digital Compact Servo Drive, rated current 90A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version 2.06
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5190-0000-0202
|
Digital Compact Servo Drive, rated current 90A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version >= 2.10
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5190-0000-0210
|
Digital Compact Servo Drive, rated current 90A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version 2.06
0-833 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5191-0000-0200
|
Digital Compact Servo Drive, rated current 110A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version 2.06
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5191-0000-0202
|
Digital Compact Servo Drive, rated current 110A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version >= 2.10
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5191-0000-0210
|
Digital Compact Servo Drive, rated current 110A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version 2.06
0-833 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5192-0000-0200
|
Digital Compact Servo Drive, rated current 143A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version 2.06
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5192-0000-0202
|
Digital Compact Servo Drive, rated current 143A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version >= 2.10
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5192-0000-0210
|
Digital Compact Servo Drive, rated current 143A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version 2.06
0-833 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5193-0000-0200
|
Digital Compact Servo Drive, rated current 170A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version 2.06
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5193-0000-0202
|
Digital Compact Servo Drive, rated current 170A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version >= 2.10
0-599 Hz
OCT (One Cable Technology) not supported
compatible with the following TwinSAFE products:
AX5806-0000
|
Beckhoff Vietnam
|
AX5193-0000-0210
|
Digital Compact Servo Drive, rated current 170A,
1-axis drive,3x400-480 VAC
EtherCAT interface
hardware version 2.0
firmware version 2.06
0-833 Hz
NO FUNCTIONALITY with the following TwinSAFE products:
AX5801-0000
AX5801-0200
AX5805-0000
|
Beckhoff Vietnam
|
AX5201-0000-0200
|
Digital Compact Servo Drive, rated current 2x1.5 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5201-0000-0201
|
Digital Compact Servo Drive, rated current 2x1.5 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5201-0000-0202
|
Digital Compact Servo Drive, rated current 2x1.5 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5201-0000-0203
|
Digital Compact Servo Drive, rated current 2x1.5 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5201-0000-0210
|
Digital Compact Servo Drive, rated current 2x1.5 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5201-0000-0212
|
Digital Compact Servo Drive, rated current 2x1 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5201-0000-1201
|
Digital Compact Servo Drive, rated current 2x1.5 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
Customer specific version -1201:
- Bystronic labeling
- Bystronic no. 10063834
|
Beckhoff Vietnam
|
AX5201-0000-1202
|
Digital Compact Servo Drive, rated current 2x1.5 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
Customer specific version -1202:
- without X01, X02 and X03 connector
|
Beckhoff Vietnam
|
AX5203-0000-0200
|
Digital Compact Servo Drive, rated current 2x3 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5203-0000-0201
|
Digital Compact Servo Drive, rated current 2x3 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5203-0000-0202
|
Digital Compact Servo Drive, rated current 2x3 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5203-0000-0203
|
Digital Compact Servo Drive, rated current 2x3 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5203-0000-0210
|
Digital Compact Servo Drive, rated current 2x3 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5203-0000-0212
|
Digital Compact Servo Drive, rated current 2x3 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5203-0000-1201
|
Digital Compact Servo Drive, rated current 2x3 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
special version -1201:
- ID Nagel P-0-0851
- Firmware 2.10 build 0011
|
Beckhoff Vietnam
|
AX5203-0000-1202
|
Digital Compact Servo Drive, rated current 2x3 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
special version -1202:
- only OCT Feedback possible, no feedback connectors, no digital I/Os
on front side
|
Beckhoff Vietnam
|
AX5206-0000-0200
|
Digital Compact Servo Drive, rated current 2x6 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
|
Beckhoff Vietnam
|
AX5206-0000-0201
|
Digital Compact Servo Drive, rated current 2x6 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5206-0000-0202
|
Digital Compact Servo Drive, rated current 2x6 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
|
Beckhoff Vietnam
|
AX5206-0000-0203
|
Digital Compact Servo Drive, rated current 2x6 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-599 Hz
special coated boards for the use at special ambience conditions.
|
Beckhoff Vietnam
|
AX5206-0000-0210
|
Digital Compact Servo Drive, rated current 2x6 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version 2.06
0-833 Hz
|
Beckhoff Vietnam
|
AX5206-0000-0212
|
Digital Compact Servo Drive, rated current 2x6 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
firmware version >= 2.10
0-833 Hz
|
Beckhoff Vietnam
|
AX5206-0000-1003
|
Digital Compact Servo Drive, rated current 2x6 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 1.0
0-833 Hz
Customer specific E2m -1003 as follows:
Hardware is compatible to AX5206-0000-0000 (up to 31.12.2014)
//ab 01.01.15 wurde der AX5206-0000-0000 begrenzt auf 599Hz
|
Beckhoff Vietnam
|
AX5206-0000-1204
|
Digital Compact Servo Drive, rated current 2x6 A,
2-axis drive, 100-480 VAC
EtherCAT interface
integrated mains filter
hardware version 2.0
0-599 Hz
|
Beckhoff Vietnam
|
AX5701-0000
|
Encoder option card for AX5000
One additional encoder input 1 Vpp/BiSS B, Hiperface, EnDat
(only for AX51xx)
- 1x DSUB, 15-pin, female
- X41 for channel 1
Only for servo drives AX51xx-xxxx-x2xx (hardware version 2.0)
|
Beckhoff Vietnam
|
AX5702-0000
|
Encoder option card for AX5000
One additional encoder input 1 Vpp/BiSS B, Hiperface, EnDat
(only for AX52xx)
- 2x DSUB, 15-pin, female
- X41 for channel 1
- X42 for channel 2
Only for servo drives AX52xx-xxxx-x2xx (hardware version 2.0)
|
Beckhoff Vietnam
|
AX5721-0000
|
Encoder option card for AX5000
One additional encoder input
EnDat 2.2 / BiSS C
- 1x DSUB
- X41 for channel 1
Only for servo drives AX51xx-xxxx-x2xx (hardware version 2.0)
|
Beckhoff Vietnam
|
AX5722-0000
|
Encoder option card for AX5000
Two additional encoder inputs
EnDat 2.2 / BiSS C (one input per channel)
- 2x DSUB
- X41 for channel 1
- X42 for channel 2
Only for servo drives AX52xx-xxxx-x2xx (hardware version 2.0)
|
Beckhoff Vietnam
|
AX5801-0200
|
TwinSAFE-Drive-Option Card for AX5000 <=40A (hardware version 2.0)
STO (Safe Torque Off)
compatible (connector and function) to AX5801-0000-0000
(for hardware version 1.0)
PLe (Performance Level e)
DIN EN 13849
Attention! Only compatible with the following drives:
AX5x01-xxxx-x2xx
AX5x03-xxxx-x2xx
AX5x06-xxxx-x2xx
AX5112-xxxx-x2xx
AX5118-xxxx-x2xx
AX5125-xxxx-x2xx
AX5140-xxxx-x2xx
Application only as defined in product documentation!
A withdrawal of the safety devices is just possible if the seal and
the package are undamaged!
|
Beckhoff Vietnam
|
AX5805-0000
|
TwinSAFE drive option card
TwinSAEFE options according to IEC 61800-5-2:
-STO Safe Torque Off
-SS1 Safe Stop 1
-SS2 Safe Stop 2
-SOS Safe Operating Stop
-SLS Safely Limited Speed
-SSM Safe Speed Monitor
-SSR Safe Speed Range
-SMS Safe maximum Speed
-SLP Safely Limited Position
-SCA Safe Cam
-SLI Safely-Limited Increment
-SAR Safe Acceleration Range
-SMA Safe Maximum Acceleration
-SDI Safe Direction
Attention!
AX5805 only runs with AX5xxx-xxxx-02xx (<= 40A)
Application only as defined in product documentation!
A withdrawal of the safety devices is just possible if the seal and
the package are undamaged!
|
Beckhoff Vietnam
|
AX5806-0000
|
TwinSAFE drive option card (AX5000 60A - 170A)
TwinSAEFE options according to IEC 61800-5-2:
-STO Safe Torque Off
-SS1 Safe Stop 1
-SS2 Safe Stop 2
-SOS Safe Operating Stop
-SLS Safely Limited Speed
-SSM Safe Speed Monitor
-SSR Safe Speed Range
-SMS Safe maximum Speed
-SLP Safely Limited Position
-SCA Safe Cam
-SLI Safely-Limited Increment
-SAR Safe Acceleration Range
-SMA Safe Maximum Acceleration
-SDI Safe Direction
Attention!
AX5806 only runs with AX5xxx-xxxx-020x (60A - 170A)
Application only as defined in product documentation!
A withdrawal of the safety devices is just possible if the seal and
the package are undamaged!
|
Beckhoff Vietnam
|
AX5901-0000
|
AX-Bridge-Power-Supply-module for connection of supply or DC link
voltage and 24 V DC for control and brake energy (pluggable)
For AX5x01...AX5125 only (up tp 25A)
|
Beckhoff Vietnam
|
AX5902-0000
|
AX-Bridge-Power-Supply-module for connection of supply or DC link
voltage and 24 V DC for control and brake energy (pluggable)
For AX5140 only
|
Beckhoff Vietnam
|
AX5911-0000
|
AX-Bridge-Power-Distribution-module, quick connection system for
power supply,DC link and control voltage (pluggable)
For AX5x01 till AX5112
|
Beckhoff Vietnam
|
AX5911-1001
|
AX-Bridge-Power-Distribution-module, quick connection system for
power supply,DC link and control voltage (pluggable)
For AX5x01 till AX5112
Customer specific version -1001:
- Bystronic labeling
- Bystronic no. 10063838
|
Beckhoff Vietnam
|
AX5912-0000
|
AX-Bridge-Power-Distribution-module, quick connection system for
power supply,DC link and control voltage (pluggable)
For AX5118 till AX5125
|
Beckhoff Vietnam
|
AX8108-0000-0000
|
AX8000 single-axis module 8 A
feedback: OCT
without TwinSAFE
|
Beckhoff Vietnam
|
AX8108-0100-0000
|
AX8000 single-axis module 8 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
|
Beckhoff Vietnam
|
AX8108-0100-2102
|
AX8000 single-axis module 8 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
fixed Interface Revision 0102 (FW1.02 latest build)
|
Beckhoff Vietnam
|
AX8108-0100-2103
|
AX8000 single-axis module 8 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
fixed Interface Revision 0103 (FW1.03 latest build)
|
Beckhoff Vietnam
|
AX8108-0110-0000
|
AX8000 single-axis module 8 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
multi feedback interface
|
Beckhoff Vietnam
|
AX8108-0200-0000
|
AX8000 single-axis module 8 A
Feedback: OCT
TwinSAFE: Safe Motion, TwinSAFE Logic integrated
|
Beckhoff Vietnam
|
AX8108-0210-0000
|
AX8000 single-axis module 8 A
Feedback: OCT
TwinSAFE: Safe Motion, TwinSAFE Logic integrated
multi feedback interface
|
Beckhoff Vietnam
|
AX8118-0000-0000
|
AX8000 single-axis module 18 A
feedback: OCT
without TwinSAFE
|
Beckhoff Vietnam
|
AX8118-0100-0000
|
AX8000 single-axis module 18 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
|
Beckhoff Vietnam
|
AX8118-0100-1003
|
Customer specific Sealpac
AX8000 single-axis module 18 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
Version -1003:
- customer specific front
- customer specific name plate
- neutral box
- fixed Interface Revision 0103 (FW1.03 latest build)
- Sealpac ID K-6-2417
|
Beckhoff Vietnam
|
AX8118-0100-2102
|
AX8000 single-axis module 18 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
fixed Interface Revision 0102 (FW1.02 latest build)
|
Beckhoff Vietnam
|
AX8118-0100-2103
|
AX8000 single-axis module 18 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
fixed Interface Revision 0103 (FW1.03 latest build)
|
Beckhoff Vietnam
|
AX8118-0110-0000
|
AX8000 single-axis module 18 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
multi feedback interface
|
Beckhoff Vietnam
|
AX8118-0110-2102
|
AX8000 single-axis module 18 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
multi feedback interface
fixed Interface Revision 0102 (FW1.02 latest build)
|
Beckhoff Vietnam
|
AX8118-0200-0000
|
AX8000 single-axis module 18 A
Feedback: OCT
TwinSAFE: Safe Motion, TwinSAFE Logic integrated
|
Beckhoff Vietnam
|
AX8118-0210-0000
|
AX8000 single-axis module 18 A
Feedback: OCT
TwinSAFE: Safe Motion, TwinSAFE Logic integrated
multi feedback interface
|
Beckhoff Vietnam
|
AX8206-0000-0000
|
AX8000 double-axis module 2x6 A
Feedback: OCT
without TwinSAFE
|
Beckhoff Vietnam
|
AX8206-0100-0000
|
AX8000 double-axis module 2x6 A
Feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
|
Beckhoff Vietnam
|
AX8206-0100-2102
|
AX8000 double-axis module 2x6 A
Feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
fixed Interface Revision 0102 (FW1.02 latest build)
|
Beckhoff Vietnam
|
AX8206-0100-2103
|
AX8000 double-axis module 2x6 A
Feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
fixed Interface Revision 0103 (FW1.03 latest build)
|
Beckhoff Vietnam
|
AX8206-0110-0000
|
AX8000 double-axis module 2x6 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
multi feedback interface
|
Beckhoff Vietnam
|
AX8206-0110-2102
|
AX8000 double-axis module 2x6 A
feedback: OCT
TwinSAFE: STO/SS1, TwinSafe Logic integrated
multi feedback interface
fixed Interface Revision 0102 (FW1.02 latest build)
|
Beckhoff Vietnam
|
AX8206-0200-0000
|
AX8000 double-axis module 2x6 A
Feedback: OCT
TwinSAFE: Safe Motion, TwinSAFE Logic integrated
|
Beckhoff Vietnam
|
AX8206-0210-0000
|
AX8000 double-axis module 2x6 A
Feedback: OCT
TwinSAFE: Safe Motion, TwinSAFE Logic integrated
multi feedback interface
|
Beckhoff Vietnam
|
AX8620-0000-0000
|
AX8000 power supply module 20 A
for supply voltage 100...480V AC
|
Beckhoff Vietnam
|
AX8640-0000-0000
|
AX8000 power supply module 40 A
for supply voltage 3x200...480V AC
|
Beckhoff Vietnam
|
AX8810-0000-0000
|
AX8000 capacitor module / DC-Link extension module 1755 µF
for supply voltage 400...480V AC
|
Beckhoff Vietnam
|
AX8810-0000-1003
|
Customer specific Sealpac
AX8000 capacitor module / DC-Link extension module 1755 µF
for supply voltage 400...480V AC
Version -1003:
- customer specific front
- customer specific name plate
- neutral box
- fixed Interface Revision 0103 (FW1.03 latest build)
- Sealpac ID: K-6-2419
|
Beckhoff Vietnam
|
HLAE70-M02-40-1C1-AM883x
|
Stainless steel planetary gearbox,
2 stage
ratio = 40
max. acceleration torque Ma = 48Nm
nominal output torque Mn = 30Nm
shaft with feather key
backlash <= 10 arcmin
|
Beckhoff Vietnam
|
Magnet Set ByStar F6225
|
re-usabel packaging for 36 pcs
content:
20x AL2920-0000-9001
magnet plate TB 288mm
|
Beckhoff Vietnam
|
Magnet Set ByStar F8025
|
re-usabel packaging for 36 pcs
content:
34x AL2920-0000-9001
magnet plate TB 288mm
|
Beckhoff Vietnam
|
Magnet Set ByStar Fiber 3015 / FX25
|
re-usabel packaging for 36 pcs
content:
28x AL2920-0000-9001
magnet plate TB 288mm
|
Beckhoff Vietnam
|
Magnet Set ByStar Fiber 3015 Brücke
|
re-usabel packaging for 48 pcs
content:
48x AL2120-0000-9001
magnet plate TL 288mm
|
Beckhoff Vietnam
|
Magnet Set ByStar Fiber 4020
|
re-usabel packaging for 36 pcs
content:
36x AL2920-0000-9001
magnet plate TB 288mm
|
Beckhoff Vietnam
|
Magnetyoke 126mm
|
Magnet yoke 126mm
UL Series
|
Beckhoff Vietnam
|
Magnetyoke 210mm
|
Magnet yoke 210mm
UL Series
|
Beckhoff Vietnam
|
Magnetyoke 546mm
|
Magnet yoke 546mm
UL series
|
Beckhoff Vietnam
|
Magnetyoke UL 168mm
|
Magnet yoke 168mm
UL Series
|
Beckhoff Vietnam
|
Magnetyoke UM 120mm
|
Magnet plate 120mm
|
Beckhoff Vietnam
|
PFHE64-8-0B1-AM801x
|
Planetary Gearbox 1 stage
ratio = 8
max. acceleration torque Ma = 29Nm
nominal output torque Mn = 18Nm
flange
Backlash <10 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE110-20-0E1-AM804x
|
Planetary Gearbox 2 stages
ratio = 20
max. acceleration torque Ma = 416Nm
nominal output torque Mn = 260Nm
flange
Backlash <9 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE110-32-0G1-AM805x
|
Planetary Gearbox 2 stages
ratio = 32
max. acceleration torque Ma = 416Nm
nominal output torque Mn = 260Nm
flange
Backlash <9 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE64-10-1B1-AM802x
|
Planetary Gearbox 1 stages
ratio = 10
max. acceleration torque Ma = 24Nm
nominal output torque Mn = 15Nm
flange with dowel hole
Backlash <10 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE64-25-0C1-AM803x
|
Planetary Gearbox 2 stages
ratio = 25
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
flange
Backlash <12 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE64-40-0B1-AM802x
|
Planetary Gearbox 2 stages
ratio = 40
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
flange
Backlash <12 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE64-5-0E1-AM804x
|
Planetary Gearbox 1 stages
ratio = 5
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
flange
Backlash <10 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE64-64-0B1-AM802x
|
Planetary Gearbox 2 stages
ratio = 64
max. acceleration torque Ma = 29Nm
nominal output torque Mn = 18Nm
flange
Backlash <12 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE64-7-0E1-AM804x
|
Planetary Gearbox 1 stages
ratio = 7
max. acceleration torque Ma = 40Nm
nominal output torque Mn = 25Nm
flange
Backlash <10 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE64-8-0B1-AM801x
|
Planetary Gearbox 1 stages
ratio = 8
max. acceleration torque Ma = 29Nm
nominal output torque Mn = 18Nm
flange
Backlash <10 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE90-15-0E1-AM804x
|
Planetary Gearbox 2 stages
ratio = 15
max. acceleration torque Ma = 176Nm
nominal output torque Mn = 110Nm
flange
Backlash <9 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE90-25-0B1-AM802x
|
Planetary Gearbox 2 stages
ratio = 25
max. acceleration torque Ma = 176Nm
nominal output torque Mn = 110Nm
flange
Backlash <9 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE90-40-0C1-AM803x
|
Planetary Gearbox 2 stages
ratio = 40
max. acceleration torque Ma = 176Nm
nominal output torque Mn = 110Nm
Backlash <9 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFE90-5-0E1-AM804x
|
Planetary Gearbox 1 stage
ratio = 5
max. acceleration torque Ma = 176Nm
nominal output torque Mn = 110Nm
flange
Backlash <7 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN110-10-0I0-AM806x
|
Planetary Gearbox 1 stage
ratio = 10
max. acceleration torque Ma = 200Nm
nominal output torque Mn = 125Nm
flange
red. backlash <1 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN110-32-0E1-AM804x
|
Planetary Gearbox 2 stage
ratio = 32
max. acceleration torque Ma = 480Nm
nominal output torque Mn = 300Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN110-40-0G1-AM805x
|
Planetary Gearbox 2 stage
ratio = 40
max. acceleration torque Ma = 416Nm
nominal output torque Mn = 260Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN110-50-0E1-AM804x
|
Planetary Gearbox 2 stage
ratio = 50
max. acceleration torque Ma = 416Nm
nominal output torque Mn = 260Nm
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN140-100-0C1-AM803x
|
Planetary Gearbox 2 stage
ratio = 100
max. acceleration torque Ma = 488Nm
nominal output torque Mn = 305Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN140-100-0G1-AM805x
|
Planetary Gearbox 2 stage
ratio = 100
max. acceleration torque Ma = 488Nm
nominal output torque Mn = 360Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN140-10-0I0-AM806x
|
Planetary Gearbox 1 stage
ratio =
max. acceleration torque Ma = 488Nm
nominal output torque Mn = 305Nm
flange
red. backlash <1 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN140-16-0I0-AM806x
|
planetary gearbox, 2-stage, flange gearbox
ratio = 16
max. acceleration torque Ma = 1600Nm
nominal output torque Mn = 1000Nm
flange
reduced backlash <1 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN140-16-0I1-AM806x
|
Planetary Gearbox 2 stage
ratio = 16
max. acceleration torque Ma = 1000Nm
nominal output torque Mn = 1600Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN140-64-0G1-AM305x
|
Planetary Gearbox 2 stage
ratio = 64
max. acceleration torque Ma = 450Nm
nominal output torque Mn = 720Nm
Flansch
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN140-64-0G1-AM805x
|
Planetary Gearbox 2 stage
ratio = 64
max. acceleration torque Ma = 720Nm
nominal output torque Mn = 450Nm
Flansch
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN200-40-0K1-AM807x
|
planetary gearbox, 2-stage, flange gearbox
ratio = 40
max. acceleration torque Ma = 2880Nm
nominal output torque Mn = 1800Nm
flange
backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN200-50-0I1-AM806x
|
planetary gearbox, 2-stage, flange gearbox
ratio = 50
max. acceleration torque Ma = 2440Nm
nominal output torque Mn = 1525Nm
flange
backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN64-100-0B0-AM802x
|
Planetary Gearbox 2 stage
ratio = 100
max. acceleration torque Ma = 43Nm
nominal output torque Mn = 27Nm
flange
red. backlash <1 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN64-100-1B0-AM802x
|
Planetary Gearbox 2 stage
ratio = 100
max. acceleration torque Ma = 43Nm
nominal output torque Mn = 27Nm
flange with dowel bore
red. backlash <1 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN64-20-0B1-AM802x
|
Planetary Gearbox 2 stage
ratio = 20
max. acceleration torque Ma = 123Nm
nominal output torque Mn = 77Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN64-32-0B1-AM802x
|
Planetary Gearbox 2 stage
ratio = 32
max. acceleration torque Ma = 123Nm
nominal output torque Mn = 77Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN64-32-0C1-AM803x
|
Planetary Gearbox 2 stage
ratio = 32
max. acceleration torque Ma = 123Nm
nominal output torque Mn = 77Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN64-64-1C1-AM803x
|
Planetary Gearbox 2 stage
ratio = 64
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
flange with dowel bore
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLFN90-40-0C1-AM803x
|
Planetary Gearbox 2 stage
ratio = 40
max. acceleration torque Ma = 224Nm
nominal output torque Mn = 140Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLHE120-32-0F1-AM804x
|
Planetary Gearbox 2 stages
ratio = 32
max. acceleration torque Ma = 416Nm
nominal output torque Mn = 260Nm
smooth shaft
Backlash <9 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLHE120-32-0G1-AM805x
|
Planetary Gearbox 2 stages
ratio = 32
max. acceleration torque Ma = 416Nm
nominal output torque Mn = 260Nm
smooth shaft
Backlash <9 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLHE60-10-1C1-AM803x
|
Planetary Gearbox 1 stages
ratio = 10
max. acceleration torque Ma = 24Nm
nominal output torque Mn = 15Nm
shaft with feather key
Backlash <10 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLHE60-3-1B1-AS1060
|
Planetary Gearbox 1 stages
ratio = 3
max. acceleration torque Ma = 45Nm
nominal output torque Mn = 28Nm
shaft with feather key
Backlash <10 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLHE60-32-0B1-AM802x
|
Planetary Gearbox 2 stages
ratio = 32
max. acceleration torque Ma = 70Nm
nominal output torque Mn = 44Nm
smooth shaft
Backlash <12 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLHE60-40-1B1-AM802x
|
Planetary Gearbox 2 stages
ratio = 40
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
shaft with feather key
Backlash <12 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLHE60-5-1E1-AM804x
|
Planetary Gearbox 1 stages
ratio = 5
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
shaft with feather key
Backlash <10 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLHE80-15-0E1-AM804x
|
Planetary Gearbox 2 stages
ratio = 15
max. acceleration torque Ma = 176Nm
nominal output torque Mn = 110Nm
smooth shaft
Backlash <9 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLHE80-9-0E1-AM804x
|
Planetary Gearbox 2 stages
ratio = 9
max. acceleration torque Ma = 208Nm
nominal output torque Mn = 130Nm
smooth shaft
Backlash <9 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN115-16-2I1-AM806x
|
Planetary Gearbox 2 stage
ratio = 16
max. acceleration torque Ma = 480Nm
nominal output torque Mn = 300Nm
Toothed output shaft DIN 5480
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN115-25-AM305x-OP14
|
Planetary Gearbox 2 stage
ratio i=25, Tn=210Nm, Tacc=390Nm
Backlash <5 arcmin
OP14: Flange compatible to PLS115
Price incl. mounting and test on a.m. motor
|
Beckhoff Vietnam
|
PLN115-8-2G1-AM805x
|
Planetary Gearbox 1 stage
ratio = 8
max. acceleration torque Ma = 240Nm
nominal output torque Mn = 150Nm
Toothed output shaft DIN 5480
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN142-20-1I1-AM806x
|
Planetary Gearbox 2 stage
ratio = 20
max. acceleration torque Ma = 1600Nm
nominal output torque Mn = 1000Nm
shaft with feather key
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN142-32-1I1-AM806x
|
Planetary Gearbox 2 stage
ratio = 32
max. acceleration torque Ma = 1600Nm
nominal output torque Mn = 1000Nm
shaft with feather key
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN190-12-0K1-AM807x
|
Planetary Gearbox 2 stage
ratio = 12
max. acceleration torque Ma = 2400Nm
nominal output torque Mn = 1600Nm
Backlash <3 arcmin
OP6 = smoot shaft
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-100-0B1-AM802x
|
Planetary Gearbox 2 stage
ratio = 100
max. acceleration torque Ma = 43Nm
nominal output torque Mn = 27Nm
smooth shaft
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-10-0C1-AM803x
|
Planetary Gearbox 1 stage
ratio = 10
max. acceleration torque Ma = 43Nm
nominal output torque Mn = 27Nm
smooth shaft
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-10-1C1-AM803x
|
Planetary Gearbox 1 stage
ratio = 10
max. acceleration torque Ma = 43Nm
nominal output torque Mn = 27Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-20-1E1-AM804x-OP14
|
Planetary Gearbox 2 stage
ratio = 32
max. acceleration torque Ma = 123Nm
nominal output torque Mn = 77Nm
shaft with feather key
Backlash <5 arcmin
OP14: output side compatible to PLS series
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-3-0C1-AM803x
|
Planetary Gearbox 1 stage
ratio = 3
max. acceleration torque Ma = 72Nm
nominal output torque Mn = 45Nm
smooth shaft
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-3-1C1-AM803x
|
Planetary Gearbox 1 stage
ratio = 3
max. acceleration torque Ma = 72Nm
nominal output torque Mn = 45Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-64-1B1-AM802x
|
Planetary Gearbox 2 stage
ratio = 64
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
shaft with feather key
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-64-1C1-AM803x
|
Planetary Gearbox 2 stage
ratio = 64
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
shaft with feather key
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-8-1B1-AM802x
|
Planetary Gearbox 1 stage
ratio = 8
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-8-1C1-AM803x
|
Planetary Gearbox 1 stage
ratio = 8
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-8-1E1-AM804x
|
Planetary Gearbox 1 stage
ratio = 8
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN70-8-AM803x-OP11+OP14
|
Planetary Gearbox 1 stage
ratio = 8
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
Backlash <3 arcmin
OP11: PL/WPL output shaft
OP14: output side compatible to PLS series
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN90-10-1E1-AM804x
|
Planetary Gearbox 1 stage
ratio = 10
max. acceleration torque Ma = 96Nm
nominal output torque Mn = 60Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN90-12-1G1-AM805x
|
Planetary Gearbox 2 stage
ratio = 12
max. acceleration torque Ma = 176Nm
nominal output torque Mn = 110Nm
shaft with feather key
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN90-16-1G1-AM805x
|
Planetary Gearbox 2 stage
ratio = 16
max. acceleration torque Ma = 240Nm
nominal output torque Mn = 150Nm
shaft with feather key
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN90-25-1G1-AM805x
|
Planetary Gearbox 2 stage
ratio = 25
max. acceleration torque Ma = 224Nm
nominal output torque Mn = 140Nm
shaft with feather key
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN90-3-1E1-AM804x
|
Planetary Gearbox 1 stage
ratio = 3
max. acceleration torque Ma = 160Nm
nominal output torque Mn = 100Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN90-3-1G1-AM805x
|
Planetary Gearbox 1 stage
ratio = 3
max. acceleration torque Ma = 160Nm
nominal output torque Mn = 100Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN90-5-1G1-AM805x
|
Planetary Gearbox 1 stage
ratio = 5
max. acceleration torque Ma = 104Nm
nominal output torque Mn = 65Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN90-8-0G1-AM805x
|
Planetary Gearbox 1 stage
ratio = 8
max. acceleration torque Ma = 128Nm
nominal output torque Mn = 80Nm
smooth shaft
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLN90-8-1G1-AM805x
|
Planetary Gearbox 1 stage
ratio = 8
max. acceleration torque Ma = 128Nm
nominal output torque Mn = 80Nm
shaft with feather key
Backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE120-15-1I1-AM806x
|
Planetary gearbox, 2 stage
ratio =15
max. acceleration torque Ma =275
nominal output torque Mn =172
shaft with feather key
backlash <9
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE120-16-1E1-AM804x
|
Planetary gearbox, 2 stage
ratio =16
max. acceleration torque Ma =312
nominal output torque Mn =195
shaft with feather key
backlash <9
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE120-4-1I1-AM806x
|
Planetary gearbox, 1 stage
ratio =4
max. acceleration torque Ma =248
nominal output torque Mn =155
shaft with feather key
backlash <9
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE120-64-1I1-AM806x
|
Planetary gearbox, 2 stage
ratio =64
max. acceleration torque Ma =192
nominal output torque Mn =120
shaft with feather key
backlash <7
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE155-25-0I1-AM806x
|
Planetary Gearbox 2 stage
ratio =25
max. acceleration torque Ma = 712Nm
nominal output torque Mn = 445Nm
smooth shaft
backlash <10 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE50-32-1B1-AM801x
|
Planetary gearbox, 2 stage
ratio =32
max. acceleration torque Ma =24
nominal output torque Mn =15
shaft with feather key
backlash <19
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE50-7-1B1-AM802x
|
Planetary gearbox, 1 stage
ratio =7
max. acceleration torque Ma =13,5
nominal output torque Mn =8,5
shaft with feather key
backlash <15
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-10-0D1-AM804x
|
Planetary gearbox, 1 stage
ratio =10
max. acceleration torque Ma =24
nominal output torque Mn =15
smooth shaft
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-10-1B1-AM802x
|
Planetary gearbox, 1 stage
ratio =10
max. acceleration torque Ma =24
nominal output torque Mn =15
shaft with feather key
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-10-1B1-AS1060
|
Planetary gearbox, 1 stage
ratio =10
max. acceleration torque Ma =24
nominal output torque Mn =15
shaft with feather key
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-10-1C1-AM803x
|
Planetary gearbox, 1 stage
ratio =10
max. acceleration torque Ma =24
nominal output torque Mn =15
shaft with feather key
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-10-1E1-AM804x
|
Planetary gearbox, 1 stage
ratio =10
max. acceleration torque Ma =24
nominal output torque Mn =15
shaft with feather key
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-15-1B1-AM802x
|
Planetary gearbox, 2 stage
ratio =15
max. acceleration torque Ma =53
nominal output torque Mn =33
shaft with feather key
backlash <12
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-15-1E1-AM804x
|
Planetary gearbox, 2 stage
ratio =15
max. acceleration torque Ma =53
nominal output torque Mn =33
shaft with feather key
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-16-1C1-AM803x
|
Planetary gearbox, 2 stage
ratio =16
max. acceleration torque Ma =53
nominal output torque Mn =33
shaft with feather key
backlash <12
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-20-1B1-AM802x
|
Planetary gearbox, 2 stage
ratio =20
max. acceleration torque Ma =53
nominal output torque Mn =33
shaft with feather key
backlash <12
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-40-0C1-AM803x
|
Planetary gearbox, 2 stage
ratio =40
max. acceleration torque Ma =48 Nm
nominal output torque Mn =30 Nm
smooth shaft
backlash <12 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-4-1B1-AM802x
|
Planetary gearbox, 1 stage
ratio =4
max. acceleration torque Ma =53
nominal output torque Mn =33
shaft with feather key
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-64-1B1-AM802x
|
Planetary gearbox, 2 stage
ratio =64
max. acceleration torque Ma =29
nominal output torque Mn =18
shaft with feather key
backlash <12
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-64-1C1-AM803x
|
Planetary gearbox, 2 stage
ratio =64
max. acceleration torque Ma =29
nominal output torque Mn =18
shaft with feather key
backlash <12
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-7-1C1-AM803x
|
Planetary gearbox, 1 stage
ratio =7
max. acceleration torque Ma =40
nominal output torque Mn =25
shaft with feather key
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-8-1C1-AM803x
|
Planetary gearbox, 1 stage
ratio =8
max. acceleration torque Ma =29
nominal output torque Mn =18
shaft with feather key
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE70-8-1E1-AM804x
|
Planetary gearbox, 1 stage
ratio =8
max. acceleration torque Ma =29
nominal output torque Mn =18
shaft with feather key
backlash <10
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-10-0G1-AM805x
|
Planetary gearbox, 1 stage
ratio =10
max. acceleration torque Ma =61
nominal output torque Mn =38
smooth shaft
backlash <7
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-10-1B1-AM802x
|
Planetary gearbox, 1 stage
ratio =10
max. acceleration torque Ma =61
nominal output torque Mn =38
shaft with feather key
backlash <7
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-10-1E1-AM804x
|
Planetary gearbox, 1 stage
ratio =10
max. acceleration torque Ma =61
nominal output torque Mn =38
shaft with feather key
backlash <7
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-20-1G1-AM805x
|
Planetary gearbox, 2 stage
ratio =20
max. acceleration torque Ma =144
nominal output torque Mn =90
shaft with feather key
backlash <9
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-25-1E1-AM804x
|
Planetary gearbox, 2 stage
ratio =25
max. acceleration torque Ma =131
nominal output torque Mn =82
shaft with feather key
backlash <9
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-3-1E1-AM804x
|
Planetary gearbox, 1 stage
ratio =3
max. acceleration torque Ma =136
nominal output torque Mn =85
shaft with feather key
backlash <7
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-32-1C1-AM803x
|
Planetary gearbox, 2 stage
ratio =32
max. acceleration torque Ma =144
nominal output torque Mn =90
shaft with feather key
backlash <9
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-64-1G1-AM805x
|
Planetary gearbox, 2 stage
ratio =64
max. acceleration torque Ma =80
nominal output torque Mn =50
shaft with feather key
backlash <9
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-7-1E1-AM804x
|
Planetary gearbox, 1 stage
ratio =7
max. acceleration torque Ma =104
nominal output torque Mn =65
shaft with feather key
backlash <7
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PLPE90-8-1E1-AM804x
|
Planetary gearbox, 1 stage
ratio =8
max. acceleration torque Ma =80 Nm
nominal output torque Mn =50 Nm
shaft with feather key
backlash <7
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PSFN110-35-0E1-AM804x
|
Planetary Gearbox 2 stage
ratio = 35
max. acceleration torque Ma = 280Nm
nominal output torque Mn = 175Nm
flange
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PSN70-10-1B1-AM802x
|
Planetary Gearbox 1 stage
ratio = 10
max. acceleration torque Ma = 45Nm
nominal output torque Mn = 28Nm
shaft with feather key
backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
PSN90-10-0E0-AM804x
|
Planetary Gearbox 1 stage
ratio = 10
max. acceleration torque Ma = 94Nm
nominal output torque Mn = 59Nm
smooth shaft
red. backlash <1 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
RESR-SKA.DDR.FL.245.60.52
|
Encoder RESR for Torque motor SKA.DDR.FL.245.60.52.
analog tape reader 1Vss with 5m cabel and flying leads
reference mark RESR 150mm
graduiations marked
|
Beckhoff Vietnam
|
ROBA-switch 24V Schnellschaltmodul GR1
|
ROBA-switch 24V Schnellschaltmodul
Size 1, Type 018.100.2
for Security brake Mayr ROBA-topstop
rated voltage 24 V DC
rated voltage 6, 8, 12, 16 V DC power reduce
integrated DC supply cutoff
max. current load
- 5,0 A. for <=45°C environment temperature
- 2,5 A. for <=70°C environment temperature
protection class IP100
Certification:CE
|
Beckhoff Vietnam
|
S77-R37-AQA100/3
|
S77-R37-AQA100/3
|
Beckhoff Vietnam
|
SC140-BC2-00150-AA032.000-040,000
|
Bellows coupling for SC140S-MF gearbox
Inside diameter 32.0mm
|
Beckhoff Vietnam
|
SKA.DDR.FL.245.60.52.00.30-4
|
Torque motor 400..480VAC
Mo = 70,0Nm, Io=4,46A, Nn =300 1/min
rotor moment of inertia = 44,3kgcm²
Hollow shaft 120mm
calbe length 4 meter, coupling M23 - 9 pole
Options such as radial shaft seal, holding brake or encoder can lead
to a reduction of rated data.
|
Beckhoff Vietnam
|
SKA.DDR.FL.245.60.52.00.30-6
|
Torque motor 400..480VAC
Mo = 70,0Nm, Io=4,46A, Nn =300 1/min
rotor moment of inertia = 44,3kgcm²
Hollow shaft 120mm
calbe length 6 meter, coupling M23 - 9 pole
Options such as radial shaft seal, holding brake or encoder can lead
to a reduction of rated data.
|
Beckhoff Vietnam
|
TP025X-MF2-25-0E1-2S
|
TP025X-MF2-25-0E1-2S Planetengetriebe spielarm for Multivac
Washdown unlackiert for AM3044-Kombination
|
Beckhoff Vietnam
|
UL12N
|
Ironless linear servo motor
Fp=960N, Ip=14.1A, N-Type
max. 5m/s
|
Beckhoff Vietnam
|
UL12S
|
Ironless linear servo motor
Fp=960N, Ip=34,9A, S-Type
max. 12m/s
|
Beckhoff Vietnam
|
UL3N
|
Ironless linear servo motor
Fp=240N, Ip=3,5A, N-Type
max. 5m/s
|
Beckhoff Vietnam
|
UL6N
|
Ironless linear servo motor
Fp=480N, Ip=17,5A, N-Type
max. 12m/s
|
Beckhoff Vietnam
|
UL9N
|
Ironless linear servo motor
Fp=720N, Ip=10,6A, N-Type
max. 5m/s
|
Beckhoff Vietnam
|
UL9S
|
Ironless linear servo motor
Fp=720N, Ip=26,2A, S-Type
max. 12m/s
|
Beckhoff Vietnam
|
W506H-0R0F-032E-1
|
- Type plate "Amsler" – "2.3.1106"
VSM-identification "W506H-0R0F-032E-1"
- stillstand torque = 11 Nm, -current= 11,1 A
- motor with watercooling, bottom-mounted ports
- smooth shaft
- shaft / flangeaccuracy tol. R
- max. direct current link voltage= 700VDC
- winding cover: thermo sensor (provision of material by customer -
free of charge) in series to thermo switch
- electrical connection:rotating resolver female socket,4+4 & 12-pole
"Kollmorgen" assignment
- feedback: Resolver (2-pole)
- drawing no.: B13405
|
Beckhoff Vietnam
|
WGN70-10-6B1-AM802x
|
hollow shaft right angle gearbox 1 stages
ratio = 10
max. acceleration torque Ma = 35Nm
nominal output torque Mn = 22Nm
both side hollow shaft
Backlash <5 arcim
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
WGN70-5-6E1-AM804x
|
hollow shaft right angle gearbox 1 stages
ratio = 5
max. acceleration torque Ma = 67Nm
nominal output torque Mn = 42Nm
both side hollow shaft
Backlash <5 arcim
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
WGN90F-10-5C1-AM803x
|
hollow shaft right angle gearbox 1 stages
food grease
ratio = 10
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
one side hollow shaft
Backlash <5 arcim
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
WGN90F-10-6C1-AM803x
|
hollow shaft right angle gearbox 1 stages
food grease
ratio = 10
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
both side hollow shaft
Backlash <5 arcim
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
WPLFE64-3-1B1-AM802x
|
Right angle gearbox, 1 stage
ratio = 3
max. acceleration torque Ma = 22Nm
nominal output torque Mn = 14Nm
flange with dowel hole
Backlash <16 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
WPLFE64-5-0C1-AM803x
|
Right angle gearbox, 1 stage
ratio = 5
max. acceleration torque Ma = 38Nm
nominal output torque Mn = 24Nm
flange
Backlash <16 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
WPLFE90-64-1B1-AM802x
|
Right angle gearbox, 2 stage
ratio = 64
max. acceleration torque Ma= 80Nm
nominal output torque Mn= 50Nm
flange with dowel hole
Backlash <15 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
WPLN115-20-1G1-AM805x
|
Right angle gearbox, 2-stage
ratio = 20
max. acceleration torque Ma = 480Nm
nominal output torque Mn = 300Nm
shaft with feather key
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
WPLN70-8-0C1-AM803x
|
Right angle gearbox, 1-stage
ratio = 8
max. acceleration torque Ma = 43Nm
nominal output torque Mn = 27Nm
smooth shaft
Backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified related
to the required performance data of application!
|
Beckhoff Vietnam
|
WPLPE50-5-0B1-AM801x
|
Right angle gearbox 1-stage
ratio = 5
max. acceleration torque Ma = 12Nm
nominal output torque Mn = 7.5Nm
smooth shaft
backlash <21 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
WPLPE90-32-1C1-AM803x
|
Right angle gearbox 2-stage
ratio = 32
max. acceleration torque Ma = 144Nm
nominal output torque Mn = 90Nm
shaft with feather key
backlash <15 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
WPSFN064-25-0C0-AM803x
|
Right angle gearbox 2stage
ratio = 25
max. acceleration torque Ma = 96Nm
nominal output torque Mn = 60Nm
flange
red. backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
WPSFN090-100-0B1-AM802x
|
Right angle gearbox 2stage
ratio = 100
max. acceleration torque Ma = 94Nm
nominal output torque Mn = 59Nm
flange
backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
WPSFN090-100-0C0-AM803x
|
Right angle gearbox 2stage
ratio = 100
max. acceleration torque Ma = 94Nm
nominal output torque Mn = 59Nm
flange
red. backlash <3 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
WPSFN090-10-1E1-AM804x
|
Right angle gearbox 1stage
ratio = 10
max. acceleration torque Ma = 64Nm
nominal output torque Mn = 40Nm
flange output hollow shaft with dowel hole
backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
WPSFN110-20-0G1-AM805x
|
Right angle gearbox 1stage
ratio = 20
max. acceleration torque Ma = 480Nm
nominal output torque Mn = 300Nm
flange
backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
WPSFN110-35-0E1-AM804x
|
Right angle gearbox 2stage
ratio = 35
max. acceleration torque Ma = 410Nm
nominal output torque Mn = 255Nm
flange
backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
WPSFN110-5-0C1-AM803x
|
Right angle gearbox 1stage
ratio = 5
max. acceleration torque Ma = 224Nm
nominal output torque Mn = 140Nm
flange
backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
WPSFN140-40-0G1-AM805x
|
Right angle gearbox 2stage
ratio = 40
max. acceleration torque Ma = 720Nm
nominal output torque Mn = 450Nm
flange
backlash <5 arcmin
The compatibility of gearbox to the named motor is based on a
mechanically check only! The combination has to be verified
related to the required performance data of application!
|
Beckhoff Vietnam
|
AX2090-+BC200150-AS022,000-019,000
|
metal bellows coupling with standard clamping hub
Diameter D1: 22.0mm
Diameter D2: 19.0mm
|
Beckhoff Vietnam
|
AX2090-+BCT00015-AA015,001-031,500
|
Bellows coupling for TP004 gearbox
Diameter D1: 15mm
Diameter D2: 31,5mm
|
Beckhoff Vietnam
|
AX2090-+BCT00015-AA022,000-031,500
|
Bellows coupling for TP004 gearbox
Diameter D1: 22mm
Diameter D2: 31.5mm
|
Beckhoff Vietnam
|
AX2090-+BCT00015-AA025,000-031,500
|
Bellows coupling for TP004 gearbox
Diameter D1: 25mm
Diameter D2: 31,5mm
|
Beckhoff Vietnam
|
AX2090-+BCT00060-AA024,400-050,000
|
Bellows coupling for TP010S-MF gearbox
Diameter D1: 24.4mm
Diameter D2: 50mm
|
Beckhoff Vietnam
|
AX2090-+BCT00300-AA024,000-080,000
|
Bellows coupling for TK050S gearbox
Diameter D1: 24mm
Diameter D2: 80mm
|
Beckhoff Vietnam
|
AX2090-+BCT-00300AA050.001-080.000
|
Bellows coupling for TP050 gearbox
Diameter D1: 50mm
Diameter D2: 80mm
|
Beckhoff Vietnam
|
AX2090-+BCT01500-AA060.000-125,00A
|
Bellows coupling for TP110S-MA gearbox
Diameter D1: 60mm
Diameter D2: 125mm
|
Beckhoff Vietnam
|
AX2090-+EC05-6.35/6.00
|
jaw coupling size 05
diameter D1: 6.35 mm
diameter D2: 6.00 mm
|
Beckhoff Vietnam
|
AX2090-+EC05-6.35/6.35
|
jaw coupling size 05
diameter D1: 6.35 mm
diameter D2: 6.35 mm
|
Beckhoff Vietnam
|
AX2090-+EC05-6.35/8.00
|
jaw coupling size 05
diameter D1: 6.35 mm
diameter D2: 8.00 mm
|
Beckhoff Vietnam
|
AX2090-+EC10-14.00/14.00
|
jaw coupling size 10
diameter D1: 14.00 mm
diameter D2: 14.00 mm
|
Beckhoff Vietnam
|
AX2090-+EC10-14.00/16.00
|
jaw coupling size 10
diameter D1: 14.00 mm
diameter D2: 16.00 mm
|
Beckhoff Vietnam
|
AX2090-BW50-0300
|
external braking resistor for servo drive AX5000
300 W, 47 Ohm
for drives up to 12A
|
Beckhoff Vietnam
|
AX2090-BW50-0600
|
external braking resistor for servo drive AX5000
600 W, 47 Ohm
for drives up to 12A
|
Beckhoff Vietnam
|
AX2090-BW50-1600
|
external braking resistor for servo drive AX5000
1600 W, 47 Ohm
for drives up to 12A
|
Beckhoff Vietnam
|
AX2090-BW51-1000
|
external braking resistor for servo drive AX5000
1000 W, 23 Ohm
for drives AX5118 to AX5140 (18A - 40A)
and braking module AX5021
|
Beckhoff Vietnam
|
AX2090-BW51-3000
|
external braking resistor for servo drive AX5000
3000 W, 23,4 Ohm
for drives AX5118 to AX5140 (18A - 40A)
and braking module AX5021
|
Beckhoff Vietnam
|
AX2090-BW51-6000
|
external braking resistor for servo drive AX5000
6000 W, 23,2 Ohm
for drives AX5118 to AX5140 (18A - 40A)
and braking module AX5021
|
Beckhoff Vietnam
|
AX2090-BW52-3000
|
external braking resistor for servo drive AX5000
3000 W, 13,2 Ohm
for drives AX5160 to AX5172 (60A - 72A)
|
Beckhoff Vietnam
|
AX2090-BW52-6000
|
external braking resistor for servo drive AX5000
6000 W, 13 Ohm
for drives AX5160 to AX5172 (60A - 72A)
|
Beckhoff Vietnam
|
AX2090-BW52-9000
|
external braking resistor for servo drive AX5000
9000 W, 13.1 Ohm
for drives AX5160 to AX5172 (60A - 72A)
|
Beckhoff Vietnam
|
AX2090-BW53-3000
|
external braking resistor for servo drive AX5000
3000 W, 10,2 Ohm
for drives AX5190 to AX5191 (90A - 110A)
|
Beckhoff Vietnam
|
AX2090-BW53-6000
|
external braking resistor for servo drive AX5000
6000 W, 10 Ohm
for drives AX5190 to AX5191 (90A - 110A)
|
Beckhoff Vietnam
|
AX2090-BW53-9000
|
external braking resistor for servo drive AX5000
9000 W, 10.1 Ohm
for drives AX5190 to AX5191 (90A - 110A)
|
Beckhoff Vietnam
|
AX2090-BW54-3000
|
external braking resistor for servo drive AX5000
3000 W, 6.6 Ohm
for drives AX5192 to AX5193 (143A - 170A)
|
Beckhoff Vietnam
|
AX2090-BW54-6000
|
external ballast resistor for servo drive AX5000
6000 W, 6,5 Ohm
for drives AX5192 to AX5193 (143A - 170A)
|
Beckhoff Vietnam
|
AX2090-BW54-9000
|
external ballast resistor for servo drive AX5000
9000 W, 6,5 Ohm
for drives AX5192 to AX5193 (143A - 170A)
|
Beckhoff Vietnam
|
AX2090-BW65-0418
|
external braking resistor IP65
400 W, 18 Ohm, 5m connection cable
for AX5160 - AX5193 / AX8640
dimensions LxWxH: 260x104x29mm
with UL
|
Beckhoff Vietnam
|
AX2090-BW65-0423
|
external braking resistor IP65
400 W, 23 Ohm, 5m connection cable
for AX5118 - AX5140
dimensions LxWxH: 260x104x29mm
with UL
|
Beckhoff Vietnam
|
AX2090-BW65-0433
|
external braking resistor IP65
400 W, 33 Ohm, 5m connection cable
for AX5112 / AX8620 / AMP8620
dimensions LxWxH: 260x104x29mm
with UL
|
Beckhoff Vietnam
|
AX2090-BW65-0447
|
external braking resistor IP65
400 W, 47 Ohm, 5m connection cable
for AX5101 - AX5112 and AX520x
dimensions LxWxH: 260x104x29mm
with UL
|
Beckhoff Vietnam
|
AX2090-BW65-1518
|
external braking resistor IP65
1500 W, 18 Ohm, 5m connection cable
for AX5160 - AX5193 / AX8640
dimensions LxWxH: 604x104x53mm
with UL
|
Beckhoff Vietnam
|
AX2090-BW65-1523
|
external braking resistor IP65
1500 W, 23 Ohm, 5m connection cable
for AX5118 - AX5140
dimensions LxWxH: 604x104x53mm
with UL
|
Beckhoff Vietnam
|
AX2090-BW65-1533
|
external braking resistor IP65
1500 W, 33 Ohm, 5m connection cable
for AX5112 / AX8620 / AMP8620
dimensions LxWxH: 604x104x53mm
with UL
|
Beckhoff Vietnam
|
AX2090-BW65-1547
|
external braking resistor IP65
1500 W, 47 Ohm, 5m connection cable
for AX5101 - AX5112 and AX520x
dimensions LxWxH: 604x104x53mm
with UL
|
Beckhoff Vietnam
|
AX2090-BW80-1000
|
external braking resistor for servo drive AX8000
1000 W, 18 Ohm
for AX8640-0000
|
Beckhoff Vietnam
|
AX2090-BW80-1600
|
external braking resistor for servo drive AX8000
1600 W, 33 Ohm
for AX8620-0000
|
Beckhoff Vietnam
|
AX2090-BW80-2000
|
external ballast resistor for servo drive AX8000
2000 W, 18 Ohm
for AX8640-1000
|
Beckhoff Vietnam
|
AX2090-BW80-3200
|
external braking resistor for servo drive AX8000
3200 W, 18 Ohm
for AX8640-0000
|
Beckhoff Vietnam
|
AX2090-EB80-0001
|
PE bridge
Set:
grounding bracket incl. nut (for AX8000 series)
10pcs
|
Beckhoff Vietnam
|
AX2090-Karton-AX8000
|
Box and insert for AX8000
|
Beckhoff Vietnam
|
AX2090-MD50-0012
|
Motor choke for Servo Drive up o 12A,
AX5000 with motor cable > 25m
for rated motor current upt tp 12A
Max.permitted cable length see documentation servo drive series AX5000
|
Beckhoff Vietnam
|
AX2090-MD50-0025
|
Motor choke for Servo drives AX5118 and AX5125
for motor cable > 25m
for rated motor current up to 25A
Max.permitted cable length see documentation servo drive series AX5000
|
Beckhoff Vietnam
|
AX2090-MSKE-Encoderadapter-AX5-AX2
|
AX2090-MSKE-encoder adapter AX5000-AX2000
motor side - AX2000 side
D-Sub15 fem - D-Sub15 male
1 9
2 2
3 11
5 5
6 6
9 1
11 3
13 13
|
Beckhoff Vietnam
|
AX2090-ND50-0060
|
mains choke for AX5160
Uk=2%
|
Beckhoff Vietnam
|
AX2090-ND50-0072
|
mains choke for AX5172
Uk=2%
|
Beckhoff Vietnam
|
AX2090-ND50-0090
|
mains choke for AX5190
Uk=2%
|
Beckhoff Vietnam
|
AX2090-ND50-0110
|
mains choke for AX5191
Uk=2%
|
Beckhoff Vietnam
|
AX2090-ND50-0143
|
mains choke for AX5192
Uk=2%
|
Beckhoff Vietnam
|
AX2090-ND50-0170
|
mains choke for AX5193
Uk=2%
|
Beckhoff Vietnam
|
AX2090-ND80-0010
|
mains choke, single phase, 230 VAC, 10 A
to operate AX8620 on single phase power supplies
|
Beckhoff Vietnam
|
AX2090-ND80-0020
|
Netzdrossel, 3-phasig, 480 VAC, 20 A
to operate AX8620 on 3 phase power supplies
|
Beckhoff Vietnam
|
AX2090-ND80-0040
|
mains choke, 3-phasig, 480 VAC, 20 A
to operate AX8640 on 3 phase power supplies
|
Beckhoff Vietnam
|
AX2090-NF50-0014
|
mains filter for Servo drive AX5000 (till 14.6A)
|
Beckhoff Vietnam
|
AX2090-NF50-0032
|
mains filter for Servo drive AX5000 (up to 32,8A)
|
Beckhoff Vietnam
|
AX2090-NF50-0063
|
mains filter for Servo drive AX5000 (up to 63A)
|
Beckhoff Vietnam
|
AX2090-NF50-0100
|
mains filter for Servo drive AX5000 (up to 100A)
|
Beckhoff Vietnam
|
AX2090-NF50-0150
|
mains filter for Servo Drive AX5000 (up to 150A)
|
Beckhoff Vietnam
|
AX2090-NF50-0180
|
mains filter for Servo drive AX5000 (up to 180A)
|
Beckhoff Vietnam
|
AX2090-PLPB-070-AC20022510
|
pulley for LPB+070
|
Beckhoff Vietnam
|
AX2090-PLPB-090-AC20021429
|
pulley for LPB+090
|
Beckhoff Vietnam
|
AX2090-PLPB-120-AC20022511
|
pulley for LPB+120
|
Beckhoff Vietnam
|
AX2090-SB50-0001
|
shield plate for AX5000 Servo Drives (60 up to 72A)
shield plate to fit cable shields
|
Beckhoff Vietnam
|
AX2090-SB50-0002
|
shield plate for AX5000 Servo Drives (90 up to 110A)
shield plate to fit cable shields
|
Beckhoff Vietnam
|
AX2090-SB50-0003
|
shield plate for AX5000 Servo Drives (143 up to 170A)
shield plate to fit cable shields
|
Beckhoff Vietnam
|
AX2090-SFA4-0010
|
3 phase sine filter
Rated voltage 3x 400 V AC
Rated current 10 A
Rated frequency: <= 60 Hz
Ambient temperature: T 45/F
Protection class: IP 20
|
Beckhoff Vietnam
|
AX2090-SFA4-0016
|
3 phase sine filter
Rated voltage 3x 400 V AC
Rated current 16,5 A
Rated frequency: <= 60 Hz
Ambient temperature: T 45/F
Protection class: IP 20
|
Beckhoff Vietnam
|
AX2090-SFA4-0024
|
3 phase sine filter
Rated voltage 3x 400 V AC
Rated current 24 A
Rated frequency: <= 60 Hz
Ambient temperature: T 45/F
Protection class: IP 20
|
Beckhoff Vietnam
|
AX2090-SHTL-0000
|
feedback adapter
Stöber HTL cable to Beckhoff AX573x HTL option card
|
Beckhoff Vietnam
|
AX2090-TDWN-5000
|
Technical Documentation
Warning Notes for AX5000 until 110 A
stickers 20x20mm, self adhesive
20 pcs. per 12 stickers in diff. languages
|
Beckhoff Vietnam
|
AX2090-TS50-3000
|
transient voltage suppressor for servo drives AX5000 ( up to 25A)
ratings: 3 phase 480V AC, 25.3A; 50/60Hz, max. 50 °C
|
Beckhoff Vietnam
|
AX2090-TT80-0002
|
Isolating transformer: 1-phase, 1,6 kVA, 7 A AC
Use for: AX8620-0000, 1-phase power supply also for„split-phase“ systems
Rated voltage: 1 x 240 V AC
Output voltage: 1 x 240 V AC
Frequency: 50-60 Hz
Insulation group: ta. 40°C Cl.B
Protection class: IP00
|
Beckhoff Vietnam
|
AX2090-TT80-0010
|
Isolating transformer: 3-phase, 10 kVA, 12 A AC
Use for: AX8620-0000, 3-phase, for ungrounded delta and corner-grounded delta
Note: For this power supply module the full supply power is not available with this isolating transformer
Rated voltage: up to 3 x 480 V AC
Output voltage: up to 3 x 480 V AC
Frequency: 50-60 Hz
Vector group Dyn5
Insulation group: ta. 40°C Cl.F
Protection class: IP00
|
Beckhoff Vietnam
|
AX2090-TT80-0016
|
Isolating transformer: 3-phase, 16 kVA, 19,2 A AC
Use for: AX8620-0000, 3-phase, for ungrounded delta and corner-grounded delta
Rated voltage: up to 3 x 480 V AC
Output voltage: up to 3 x 480 V AC
Frequency: 50-60 Hz
Vector group Dyn5
Insulation group: ta. 40°C Cl.F
Protection class: IP00
|
Beckhoff Vietnam
|
AX2090-TT80-0020
|
Isolating transformer: 3-phase, 20 kVA, 24 A AC
Use for: AX8640-0000, 3-phase, for ungrounded delta and corner-grounded delta
Note: For this power supply module the full supply power is not available with this isolating transformer
Rated voltage: up to 3 x 480 V AC
Output voltage: up to 3 x 480 V AC
Frequency: 50-60 Hz
Vector group: Dyn5
Insulation group: ta. 40°C Cl.F
Protection class: IP00
|
Beckhoff Vietnam
|
AX2090-TT80-0025
|
Isolating transformer: 3-phase, 25 kVA, 30 A AC
Use for: AX8640-0000, 3-phase, for ungrounded delta and corner-grounded delta
Note: For this power supply module the full supply power is not available with this isolating transformer
Rated voltage: up to 3 x 480 V AC
Output voltage: up to 3 x 480 V AC
Frequency: 50-60 Hz
Vector group Dyn5
Insulation group: ta. 40°C Cl.F
Protection class: IP00
|
Beckhoff Vietnam
|
AX2090-TT80-0030
|
Isolating transformer: 3-phase, 30 kVA, 36 A AC
Use for: AX8640-0000, 3-phase, for ungrounded delta and corner-grounded delta
Rated voltage: up to 3 x 480 V AC
Output voltage: up to 3 x 480 V AC
Frequency: 50-60 Hz
Vector group Dyn5
Insulation group: ta. 40°C Cl.F
Protection class: IP00
|
Beckhoff Vietnam
|
AX2090-TT80-0040
|
Isolating transformer: 3-phase, 40 kVA, 48 A AC
Use for: AX8525-0000, AX8540-0000, 3-phase, for ungrounded delta and corner-grounded delta
Note: For this power supply module the full supply power is not available with this isolating transformer
Rated voltage: up to 3 x 480 V AC
Output voltage: up to 3 x 480 V AC
Frequency: 50-60 Hz
Vector group Dyn5
Insulation group: ta. 40°C Cl.F
Protection class: IP00
|
Beckhoff Vietnam
|
AX2090-TT80-0050
|
Isolating transformer: 3-phase, 50 kVA, 60 A AC
Use for: AX8525-0000, AX8540-0000, 3-phase, for ungrounded delta and corner-grounded delta
Rated voltage: up to 3 x 480 V AC
Output voltage: up to 3 x 480 V AC
Frequency: 50-60 Hz
Vector group Dyn5
Insulation group: ta. 40°C Cl.F
Protection class: IP00
|
Beckhoff Vietnam
|
AX2090-TT80-0063
|
Isolating transformer: 3-phase, 63 kVA, 75.8 A AC
Use for: AX8540-0000, 3-phase, for ungrounded delta and corner-grounded delta
Rated voltage: up to 3 x 480 V AC
Output voltage: up to 3 x 480 V AC
Frequency: 50-60 Hz
Vector group Dyn5
Insulation group: ta. 40°C Cl.F
Protection class: IP00
|
Beckhoff Vietnam
|
QS10.481 Netzteil f. Schrittmotorklemme
|
Power Supply for stepper terminal
1x 100...240V AC, Output 48V DC, 5A
|
Beckhoff Vietnam
|
QT20.241 Netzteil f. Schrittmotorklemme
|
Power Supply for stepper terminal
3x 380...480V AC, Output 24V DC, 20A
|
Beckhoff Vietnam
|
QT20.481 Netzteil f. Schrittmotorklemme
|
Power Supply for stepper terminal
3x 380...480V AC, Output 48V DC, 10A
|
Beckhoff Vietnam
|
Sicherheitsbremse-BG4-Mayr-ROBA-topstop
|
Safety brake BG4 Mayr ROBA-topstop
Size 100 for AM3x4x and AM804x, AM854x
- brake torque 6Nm
- supply voltage 24 VDC
- brake control with p-n-p transistor
- connection box with termial
Output side:
- bolt hole circle 100 mm
- pilot diameter 80mm j6
- shaft diameter 19 mm k6
ATTENTION: ROBA-switch Schnellschaltmodul (139811) necessary!!
|
Beckhoff Vietnam
|
Sicherheitsbremse-BG5-Mayr-ROBA-topstop
|
Safety brake BG5 Mayr ROBA-topstop
Size 120 for AM305x and AM805x-xxxx-9000
- brake torque 12Nm
- supply voltage 24 VDC
- brake control with p-n-p transistor
- connection box with terminal
Output side:
- bolt hole circle 130 mm
- pilot diameter 110mm j6
- shaft diameter 24 mm k6, l=50 mm
ATTENTION: ROBA-switch Schnellschaltmodul (139811) necessary!!
|
Beckhoff Vietnam
|
TDmlAX-5000-0000-0200
|
Commisioning and installing manual for AX5000
documentation drive technology
|
Beckhoff Vietnam
|
TDmlAX-5160-0000-0200
|
Commisioning and installing manual for AX5160
documentation drive technology
incl. CD AX2090-S003 Doku/SW-Tools
|
Beckhoff Vietnam
|
TDmlAX-8000-0000-0200
|
Commisioning and installing manual for AX8000
documentation drive technology
german version
|
Beckhoff Vietnam
|
TDmlAX-8000-0000-0201
|
Commisioning and installing manual for AX8000
documentation drive technology
englisch version
|
Beckhoff Vietnam
|
Verpackung AL2920-0000-9001 (230Stk.)
|
230 pcs. individual packaging AL2920-0000-9001
individual packaging consisting of folding box + 2 cardboard inlays
customer-specific
|
Beckhoff Vietnam
|
ZB8540
|
EMC shielding clamp for clamp diameter 30…37 mm,
diameter of screw hole 5.2 mm, packing unit = 10 pieces
|
Beckhoff Vietnam
|
ZK4000-2101-2zzz
|
Motor cable for AX2000, connection cable for ballast resistor,
not prepared, (4x1,5mm²+(2x1mm²)), UL and CSA listed
suitable as trailing cable (5 Mio. bending cycles)
|
Beckhoff Vietnam
|
ZK4000-2102-2zzz
|
Motor cable for AX2000/connection cable for ballast resistor,
not prepared, (4x2,5mm²+(2x1mm²)), UL and CSA listed
suitable as trailing cable (5 Mio. bending cycles)
|
Beckhoff Vietnam
|
ZK4000-2104-2zzz
|
Motor cable for AX2000/connection cable for ballast resistor,
not prepared,
4x6,0mm², UL and CSA listed
suitable as trailing cable (10 Mio. bending cycles)
|
Beckhoff Vietnam
|
ZK4000-5100-2003
|
Encoder cable for AS2000, prepared,
M12 male
male A-coded - open end
5x0,25mm², l=3m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-5100-2010
|
Encoder cable for AS2000, prepared,
M12 male
male A-coded - open end
5x0,25mm², l=1m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-5100-2030
|
Encoder cable for AS2000, prepared,
M12 male
male A-coded - open end
5x0,25mm², l=3m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-5100-2050
|
Encoder cable for AS2000, prepared,
M12 male
male A-coded - open end
5x0,25mm², l=5m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-5100-2070
|
Encoder cable for AS2000, prepared,
M12 male
male A-coded - open end
5x0,25mm², l=7m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-5100-2100
|
Encoder cable for AS2000, prepared,
M12 male
male A-coded - open end
5x0,25mm², l=10m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-5151-0001
|
Encoder cable, 0.15m, IP67, PUR, drag chain suitable, M12, plug,
straight, male, 5 pin, A coded – M12, plug, straight, male, 5 pin, A coded
|
Beckhoff Vietnam
|
ZK4000-5151-0005
|
Encoder cable, M12 connector, 5-pin
on M12 5-pin connector
screen on housing
PUR UL cable material
suitable for use in trailing cables, 2 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 0.5 m
|
Beckhoff Vietnam
|
ZK4000-5151-0010
|
Encoder cable, M12 connector, 5-pin
on M12 5-pin connector
screen on housing
PUR UL cable material
suitable for use in trailing cables, 2 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 1.0 m
|
Beckhoff Vietnam
|
ZK4000-5151-0020
|
Encoder cable, M12 connector, 5-pin
on M12 5-pin connector
screen on housing
PUR UL cable material
suitable for use in trailing cables, 2 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 2.0 m
|
Beckhoff Vietnam
|
ZK4000-5151-0030
|
Encoder cable, M12 connector, 5-pin
on M12 5-pin connector
screen on housing
PUR UL cable material
suitable for use in trailing cables, 2 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 3.0 m
|
Beckhoff Vietnam
|
ZK4000-5151-0050
|
Encoder cable, M12 connector, 5-pin
on M12 5-pin connector
screen on housing
PUR UL cable material
suitable for use in trailing cables, 2 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 5.0 m
|
Beckhoff Vietnam
|
ZK4000-5151-0100
|
Encoder cable, M12 connector, 5-pin
on M12 5-pin connector
screen on housing
PUR UL cable material
suitable for use in trailing cables, 2 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 10 m
|
Beckhoff Vietnam
|
ZK4000-5152-0010
|
AS1000/AS2000-Encoder extension cable, both ends prepared,
both ends M12 connector (male/female)
(5x0,25mm²), l=1m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 56 mm
|
Beckhoff Vietnam
|
ZK4000-5152-0020
|
AS1000/AS2000-Encoder extension cable, both ends prepared,
both ends M12 connector (male/female)
(5x0,25mm²), l=2m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 56 mm
|
Beckhoff Vietnam
|
ZK4000-5152-0030
|
AS1000/AS2000-Encoder extension cable, both ends prepared,
both ends M12 connector (male/female)
(5x0,25mm²), l=3m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 56 mm
|
Beckhoff Vietnam
|
ZK4000-5152-0050
|
AS1000/AS2000-Encoder extension cable, both ends prepared,
both ends M12 connector (male/female)
(5x0,25mm²), l=5m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 56 mm
|
Beckhoff Vietnam
|
ZK4000-5152-0100
|
AS1000/AS2000-Encoder extension cable, both ends prepared,
both ends M12 connector (male/female)
(5x0,25mm²), l=10m, shielded, UL and CSA listed,
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 56 mm
|
Beckhoff Vietnam
|
ZK4000-6100-2010
|
Supply cable, one end prepared with M12 connector,
4x0,5mm², 1m, UL and CSA listed
suitable as trailing cable (10 Mio. bending cycles)
|
Beckhoff Vietnam
|
ZK4000-6100-2020
|
Supply cable, one end prepared with M12 connector,
4x0,5mm², 2m, UL and CSA listed
suitable as trailing cable (10 Mio. bending cycles)
|
Beckhoff Vietnam
|
ZK4000-6100-2050
|
Supply cable, one end prepared with M12 connector,
4x0,5mm², 5m, UL and CSA listed
suitable as trailing cable (10 Mio. bending cycles)
|
Beckhoff Vietnam
|
ZK4000-6100-2100
|
Supply cable, one end prepared with M12 connector,
4x0,5mm², 2m, UL and CSA listed
suitable as trailing cable (10 Mio. bending cycles)
|
Beckhoff Vietnam
|
ZK4000-6200-2010
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=1m, UL and CSA listed,
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6200-2030
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=3m, UL and CSA listed,
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6200-2050
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=5m, UL and CSA listed,
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outsider diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6200-2100
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=10m, UL and CSA listed,
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6261-0005
|
Motor cables, M12 connector, 4-pin, straight
on M12 4-pin socket straight
PUR UL cable material
suitable for use in trailing cables, 4 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 0.5 m
|
Beckhoff Vietnam
|
ZK4000-6261-0010
|
Motor cables, M12 connector, 4-pin, straight
on M12 4-pin socket straight
PUR UL cable material
suitable for use in trailing cables, 4 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 1.0 m
|
Beckhoff Vietnam
|
ZK4000-6261-0020
|
Motor cables, M12 connector, 4-pin, straight
on M12 4-pin socket straight
PUR UL cable material
suitable for use in trailing cables, 4 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 2.0 m
|
Beckhoff Vietnam
|
ZK4000-6261-0030
|
Motor cables, M12 connector, 4-pin, straight
on M12 4-pin socket straight
PUR UL cable material
suitable for use in trailing cables, 4 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 3.0 m
|
Beckhoff Vietnam
|
ZK4000-6261-0050
|
Motor cables, M12 connector, 4-pin, straight
on M12 4-pin socket straight
PUR UL cable material
suitable for use in trailing cables, 4 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 5.0 m
|
Beckhoff Vietnam
|
ZK4000-6261-0100
|
Motor cables, M12 connector, 4-pin, straight
on M12 4-pin socket straight
PUR UL cable material
suitable for use in trailing cables, 4 million bending cycles
bending radius = 10 x outside diameter = 55 mm
lenght 10 m
|
Beckhoff Vietnam
|
ZK4000-6261-0200
|
Motor cable, 20.0m, IP67, PUR, drag chain suitable, M12, plug,
straight, male, 4 pin, A coded - M12, socket, straight, female,
4 pin, A coded
|
Beckhoff Vietnam
|
ZK4000-6610-2030
|
Encoder cable prepared both sides,
AMxxxx/ALxxx Heidenhain EnDat Absolutwertgeber ROC 413
on AX2000
8x2x0,14mm², l=3m, UL and CSA listed
suitable as trailing cable (10 Mio. bending cycles)
|
Beckhoff Vietnam
|
ZK4000-6700-2010
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=1m, shielded, UL and CSA listed
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6700-2020
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=2m, shielded, UL and CSA listed
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6700-2030
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=3m, shielded, UL and CSA listed
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6700-2050
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=5m, shielded, UL and CSA listed
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6700-2070
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=7m, shielded, UL and CSA listed
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6700-2100
|
Motor cable for AS1000, both ends prepared,
4x0,5mm², l=10m, shielded, UL and CSA listed
suitable as trailing cable (4 Mio. bending cycles),
bending radius = 10 x outside diameter = 55 mm
|
Beckhoff Vietnam
|
ZK4000-6768-0005
|
Motor cable, both ends prepared,
both ends M12 (male/female)
4x0,5mm², l=0,5m, shielded, UL and CSA listed
suitable as trailing cable, 2 Mio. bending cycles,
bending radius = 10 x outside diameter = 56mm
|
Beckhoff Vietnam
|
ZK4000-6768-0010
|
Motor cable, both ends prepared,
both ends M12 (male/female)
4x0,5mm², l=1m, shielded, UL and CSA listed
suitable as trailing cable, 2 Mio. bending cycles,
bending radius = 10 x outside diameter = 56mm
|
Beckhoff Vietnam
|
ZK4000-6768-0020
|
Motor cable, both ends prepared,
both ends M12 (male/female)
4x0,5mm², l=2m, shielded, UL and CSA listed
suitable as trailing cable, 2 Mio. bending cycles,
bending radius = 10 x outside diameter = 56mm
|
Beckhoff Vietnam
|
ZK4000-6768-0030
|
Motor cable, both ends prepared,
both ends M12 (male/female)
4x0,5mm², l=3m, shielded, UL and CSA listed
suitable as trailing cable, 2 Mio. bending cycles,
bending radius = 10 x outside diameter = 56mm
|
Beckhoff Vietnam
|
ZK4000-6768-0050
|
Motor cable, both ends prepared,
both ends M12 (male/female)
4x0,5mm², l=5m, shielded, UL and CSA listed
suitable as trailing cable, 2 Mio. bending cycles,
bending radius = 10 x outside diameter = 56mm
|
Beckhoff Vietnam
|
ZK4000-6768-0100
|
Motor cable, both ends prepared,
both ends M12 (male/female)
4x0,5mm², l=10m, shielded, UL and CSA listed
suitable as trailing cable, 2 Mio. bending cycles,
bending radius = 10 x outside diameter = 56mm
|
Beckhoff Vietnam
|
ZK4000-6800-2010
|
Motor cable, only one end prepared,
first end: M12 plug (male), 4 pole, shielded
second end: cutted
4x0,5mm², l=1m, shielded, UL and CSA listed
suitable as trailing cable, 2 Mio. bending cycles,
bending radius = 10 x outside diameter = 56mm
|
Beckhoff Vietnam
|
ZK4000-6800-2020
|
Motor cable, only one end prepared,
first end: M12 plug (male), 4 pole, shielded
second end: cutted
4x0,5mm², l=2m, shielded, UL and CSA listed
suitable as trailing cable, 2 Mio. bending cycles,
bending radius = 10 x outside diameter = 56mm
|
Beckhoff Vietnam
|
ZK4000-6800-2050
|
Motor cable, only one end prepared,
first end: M12 plug (male), 4 pole, shielded
second end: cutted
4x0,5mm², l=5m, shielded, UL and CSA listed
suitable as trailing cable, 2 Mio. bending cycles,
bending radius = 10 x outside diameter = 56mm
|
Beckhoff Vietnam
|
ZK4000-6877-0005
|
Motor cable for AS2000, both ends prepared,
both ends M12 male
male A-coded, coupling T-coded
(4x0,75mm²), l=0,5m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4000-6877-0010
|
Motor cable for AS2000, both ends prepared,
both ends M12 male
male A-coded, coupling T-coded
(4x0,75mm²), l=1m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4000-6877-0020
|
Motor cable for AS2000, both ends prepared,
both ends M12 male
male A-coded, coupling T-coded
(4x0,75mm²), l=2m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4000-6877-0030
|
Motor cable for AS2000, both ends prepared,
both ends M12 male
male A-coded, coupling T-coded
(4x0,75mm²), l=3m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4000-6877-0040
|
Motor cable for AS2000, both ends prepared,
both ends M12 male
male A-coded, coupling T-coded
(4x0,75mm²), l=4m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4000-6877-0050
|
Motor cable for AS2000, both ends prepared,
both ends M12 male
male A-coded, coupling T-coded
(4x0,75mm²), l=5m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4000-6877-0060
|
Motor cable for AS2000, both ends prepared,
both ends M12 male
male A-coded, coupling T-coded
(4x0,75mm²), l=6m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4000-6877-0075
|
Motor cable for AS2000, both ends prepared,
both ends M12 male
male A-coded, coupling T-coded
(4x0,75mm²), l=7,5m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4000-6877-0100
|
Motor cable for AS2000, both ends prepared,
both ends M12 male
male A-coded, coupling T-coded
(4x0,75mm²), l=10m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4000-7700-0010
|
Motor cable for AS2000, prepared,
M12 male
coupling T-coded - open end
(4x0,75mm²), l=1m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7700-0020
|
Motor cable for AS2000, prepared,
M12 male
coupling T-coded - open end
(4x0,75mm²), l=2m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7700-0030
|
Motor cable for AS2000, prepared,
M12 male
coupling T-coded - open end
(4x0,75mm²), l=3m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7700-0050
|
Motor cable for AS2000, prepared,
M12 male
coupling T-coded - open end
(4x0,75mm²), l=5m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7700-0070
|
Motor cable for AS2000, prepared,
M12 male
coupling T-coded - open end
(4x0,75mm²), l=7m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7700-0100
|
Motor cable for AS2000, prepared,
M12 male
coupling T-coded - open end
(4x0,75mm²), l=10m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7778-0010
|
AS2000-Motor extension cable, both ends prepared,
both ends M12 connector (male/female)
(4x0,75mm²), l=1m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7778-0020
|
AS2000-Motor extension cable, both ends prepared,
both ends M12 connector (male/female)
(4x0,75mm²), l=2m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7778-0030
|
AS2000-Motor extension cable, both ends prepared,
both ends M12 connector (male/female)
(4x0,75mm²), l=3m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7778-0050
|
AS2000-Motor extension cable, both ends prepared,
both ends M12 connector (male/female)
(4x0,75mm²), l=5m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-7778-0100
|
AS2000-Motor extension cable, both ends prepared,
both ends M12 connector (male/female)
(4x0,75mm²), l=10m, shielded, UL and CSA listed
suitable as trailing cable (2 Mio. bending cycles),
bending radius = 10 x outside diameter = 62 mm
|
Beckhoff Vietnam
|
ZK4000-9902-0003
|
Motor cable
4x0.34 4pol M12 SG - 6pole molex BG 0.5m PUR 0.3
AS1000 prepared
|
Beckhoff Vietnam
|
ZK4001-6700-2100
|
Extension cable for motor cable - AS1000,
both ends prepared
4x0,5mm², l=10m, shielded, UL and CSA listed
|
Beckhoff Vietnam
|
ZK4054-6400-0010
|
Fan cable for AM8000, 1.0m, IP67, PUR, 3G0.75mm², M12, socket
angled female, 4pin, A coded - open end
|
Beckhoff Vietnam
|
ZK4054-6400-0030
|
Fan cable for AM8000, 3.0m, IP67, PUR, 3G0.75mm², M12, socket
angled female, 4pin, A coded - open end
|
Beckhoff Vietnam
|
ZK4054-6400-0050
|
Fan cable for AM8000, 5.0m, IP67, PUR, 3G0.75mm², M12, socket
angled female, 4pin, A coded - open end
|
Beckhoff Vietnam
|
ZK4054-6400-0080
|
Fan cable for AM8000, 8.0m, IP67, PUR, 3G0.75mm², M12, socket
angled female, 4pin, A coded - open end
|
Beckhoff Vietnam
|
ZK4054-6400-0100
|
Fan cable for AM8000, 10m, IP67, PUR, 3G0.75mm², M12, socket
angled female, 4pin, A coded - open end
|
Beckhoff Vietnam
|
ZK4054-6400-0200
|
Fan cable for AM8000, 20m, IP67, PUR, 3G0.75mm², M12, socket
angled female, 4pin, A coded - open end
|
Beckhoff Vietnam
|
ZK4054-6400-0250
|
Fan cable for AM8000, 25m, IP67, PUR, 3G0.75mm², M12, socket
angled female, 4pin, A coded - open end
|
Beckhoff Vietnam
|
ZK4054-6400-0300
|
Fan cable for AM8000, 30m, IP67, PUR, 3G0.75mm², M12, socket
angled female, 4pin, A coded - open end
|
Beckhoff Vietnam
|
ZK4500-0003-0005
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=0.5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0008
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1.5+2x(2x0.75mm²), length l=0.8m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0010
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=1m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0015
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=1.5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0020
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=2m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0025
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=2.5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0030
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection between
AM2000 / AM3000 / AL2000 / AM3500 and AX5000.
4x1,5+2x(2x0.75mm²), length l=3m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0040
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=4m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0050
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0060
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=6m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0070
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=7m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0080
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=8m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0090
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=9m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0100
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0110
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=11m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0120
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=12m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0130
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=13m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0140
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=14m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0150
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0160
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=16m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0170
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=17m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0180
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=18m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0190
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=19m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0200
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=20m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0210
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=21m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0220
|
MMotor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=22m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0230
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=23m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0240
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=24m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0003-0250
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 / AM3500 and AX5000
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0010
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=1m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0020
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=2m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0025
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=2,5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0030
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=3m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0040
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=4m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0050
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0060
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=6m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0070
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=7m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0080
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=8m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0090
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=9m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0100
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=10m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0110
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=11m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0120
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=12m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0130
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=13m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0140
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=14m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0150
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=15m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0160
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=16m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0170
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=17m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0180
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=18m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0190
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=19m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0200
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=20m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0210
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=21m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0220
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=22m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0230
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=23m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0004-0250
|
Motor power cable for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=25m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4500-0015-0010
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=1m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0020
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=2m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0030
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=3m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0040
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=4m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0050
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=5m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0060
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=6m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0070
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=7m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0080
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=8m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0090
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=9m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0100
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=10m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0110
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=11m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0120
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=12m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0130
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=13m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0140
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=14m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0150
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=15m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0160
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=16m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0170
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=17m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0180
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=18m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0200
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=20m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0220
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=22m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0230
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=23m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0240
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=24m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0250
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=25m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0015-0300
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=25m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0010
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length=1m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0020
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 2m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0030
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 3m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0040
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 4m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0050
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 5m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0060
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 6m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0070
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 7m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0080
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 8m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0100
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 10m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0110
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 11m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0120
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 12m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0150
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 15m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0160
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 16m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0170
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 17m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0180
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 18m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0200
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 20m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0240
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 24m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0250
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 25m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0300
|
Motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length=30m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0017-0400
|
Motor cable only permissible for AX5140-0000-1202
4x10+2x1+2x1,5mm², length=40m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4500-0023-0005
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=0.5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0010
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=1m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0015
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=1.5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0020
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=2m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0025
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=2.5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0030
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0040
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=4m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0050
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0053
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=5.3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0056
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=5.6m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0058
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=5.8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0060
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=6m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0065
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=6.5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0070
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=7m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0080
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0090
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=9m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0100
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0110
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=11m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0120
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=12m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0130
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=13m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0140
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=14m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0150
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0160
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=16m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0170
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=17m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0180
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0190
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=19m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0200
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=20m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0210
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=21m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0220
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=22m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0230
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=23m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0240
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=24m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0023-0250
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-0024-0010
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=1m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0020
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=2m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0030
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0040
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=4m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0050
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0060
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=6m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0070
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=7m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0080
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0090
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=9m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0100
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0110
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=11m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0120
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=12m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0130
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=13m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0140
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=14m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0150
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0160
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=16m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0170
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=17m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0180
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0190
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=19m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0200
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=20m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0210
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=21m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0220
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=22m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0230
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=23m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0240
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=24m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0024-0250
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-0025-0050
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AL2830 and AL2845 and Connector Box on AX5000
4x4+2x1+2x1,5mm², length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 5 million cycles, max. 5 m/s, max. acceleration 30 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0025-0110
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AL2830 and AL2845 and Connector Box on AX5000
4x4+2x1+2x1,5mm², length l=11m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 5 million cycles, max. 5 m/s, max. acceleration 30 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0025-0180
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
AL2830 and AL2845 and Connector Box on AX5000
4x4+2x1+2x1,5mm², length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 5 million cycles, max. 5 m/s, max. acceleration 30 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-0423-0030
|
Motor power cable for AX5112 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x1,5+2x(2x,75mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
motor connector made of stainless steel (V2A)
|
Beckhoff Vietnam
|
ZK4500-0424-0020
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=2m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
motor connector made of stainless steel (V2A)
|
Beckhoff Vietnam
|
ZK4500-0424-0050
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
motor connector made of stainless steel (V2A)
|
Beckhoff Vietnam
|
ZK4500-4023-0050
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection between
CM71/CFM71 motor (SEW) and AX5000
Attention: Only for motors with thermal sensor (option TF)
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4023-0100
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection between
CM71/CFM71 motor (SEW) and AX5000
Attention: Only for motors with thermal sensor (option TF)
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4024-0100
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
CM71/CFM71 motor (SEW) and AX5000
Attention: Only for motors with thermal sensor (option TF)
4x2,5+2x(2x1mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-4024-0160
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
CM71/CFM71 motor (SEW) and AX5000
Attention: Only for motors with thermal sensor (option TF)
4x2,5+2x(2x1mm²), length l=16m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-4123-0050
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0080
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0100
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0150
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0160
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=16m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0180
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0200
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=20m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0230
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=23m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0250
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0280
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=28m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0300
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=30m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0330
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=33m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0350
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=35m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0380
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=38m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0400
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=40m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0430
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=43m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0450
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=45m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0500
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=50m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4123-0600
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between SEW CMP50 - CMP71-4500 with connector and AX5000
4x1,5+ (3x0.75mm²), length l=60m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-4125-0150
|
Motor power cable for AX5118 and AX5125 (18A and 25A)
both ends prepared for connection
between SEW CMP with connector size 1 (SM14) and AX5000
4x4+ (3x1mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 158 mm
|
Beckhoff Vietnam
|
ZK4500-4125-0250
|
Motor power cable for AX5118 and AX5125 (18A and 25A)
both ends prepared for connection
between SEW CMP with connector size 1 (SM14) and AX5000
4x4+ (3x1mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 158 mm
|
Beckhoff Vietnam
|
ZK4500-4125-0350
|
Motor power cable for AX5118 and AX5125 (18A and 25A)
both ends prepared for connection
between SEW CMP with connector size 1 (SM14) and AX5000
4x4+ (3x1mm²), length l=35m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 158 mm
|
Beckhoff Vietnam
|
ZK4500-4125-0450
|
Motor power cable for AX5118 and AX5125 (18A and 25A)
both ends prepared for connection
between SEW CMP with connector size 1 (SM14) and AX5000
4x4+ (3x1mm²), length l=45m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 158 mm
|
Beckhoff Vietnam
|
ZK4500-4503-0100
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface)
with power connector size 1/1,5 und 2
and AX5000
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
for fixed installation
max. 50.000 bending cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 200 mm
|
Beckhoff Vietnam
|
ZK4500-4503-0150
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface)
with power connector size 1/1,5 und 2
and AX5000
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
for fixed installation
max. 50.000 bending cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 200 mm
|
Beckhoff Vietnam
|
ZK4500-4503-0180
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface)
with power connector size 1/1,5 und 2
and AX5000
4x1,5+2x(2x0.75mm²), length l=18m, UL/CSA approved
for fixed installation
max. 50.000 bending cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 200 mm
|
Beckhoff Vietnam
|
ZK4500-4515-size1.5-2013-0150
|
Motor power cable for AX5x01 till AX5125 (1,5A till 25A)
both ends prepared for connection
between Rexroth MSK (Hiperface) and AX5000
Rexroth connector = size 1.5
AX5000 motor connector = ZS4500-2013+ZS4500-2014 (1.5 to 25A=)
4x4++2x1+2x1,5mm², length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4500-4515-size2.0-2013-0150
|
Motor power cable for AX5140 (40A)
both ends prepared for connection
between Rexroth MSK (Hiperface) and AX5000
Rexroth connector = size 2.0
AX5000 motor connector = ZS4500-2043 (BG 2.0 40A)
4x4++2x1+2x1,5mm², length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4500-4518-0110
|
Motor power cable for AX5000
both ends prepared for connection
between Rexroth and AX5000
16mm", length l=11m
suitable for flex use (e.g. drag chain):
|
Beckhoff Vietnam
|
ZK4500-4523-0030
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface) and AX5000
4x1,5+2x(2x0.75mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4500-4523-0050
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface) and AX5000
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4500-4523-0080
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface) and AX5000
4x1,5+2x(2x0.75mm²), length l=8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4500-4523-0100
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface) and AX5000
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4500-4523-0120
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface) and AX5000
4x1,5+2x(2x0.75mm²), length l=12m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4500-4523-0140
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface) and AX5000
4x1,5+2x(2x0.75mm²), length l=14m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4500-4523-0150
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Rexroth MSK (Hiperface) and AX5000
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4500-4615-0100
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
Bosch Rexroth MAD and AX5000
4x4+2x1+2x1,5mm², length l=10m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-4615-0120
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
Bosch Rexroth MAD and AX5000
4x4+2x1+2x1,5mm², length l=12m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-4615-0140
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
Bosch Rexroth MAD and AX5000
4x4+2x1+2x1,5mm², length l=14m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-4615-0160
|
Motor power cable for AX5125 (25A)
both ends prepared for connection between
Bosch Rexroth MAD and AX5000
4x4+2x1+2x1,5mm², length l=16m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4500-5023-0030
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-5023-0040
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=4m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-5023-0050
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-5023-0060
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=6m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-5023-0100
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-5023-0110
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=11m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-5023-0150
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-5023-0180
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-5023-0250
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-5023-0310
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between 1FK7 motors (Siemens) or Wittenstein TPM
with EnDat / Hiperface and AX5000
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
from 25m motor choke required
|
Beckhoff Vietnam
|
ZK4500-5024-0180
|
Motor power cable for AX5118 (18A)
both ends prepared for connection between
1FK7 motors and AX5000
4x2,5+2x(2x1mm²), length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4500-6123-0100
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AFAG LME-200 linear unit and AX5000
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-6823-0150
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Stöber EK/EK for SDS4000 with motor connector BG1 and
Phase Ultract 3 to AX5000
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-7023-0030
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Harmonic Drive "FPA" motors and AX5000
4x1,5+2x(2x0.75mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-7023-0050
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Harmonic Drive "FPA" motors and AX5000
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-7023-0070
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Harmonic Drive "FPA" motors and AX5000
4x1,5+2x(2x0.75mm²), length l=7m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-7223-0150
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Baumüller DSCG and DSDG (Motor connector BG1) and AX5000
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-7223-0200
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Baumüller DSCG and DSDG (Motor connector BG1) and AX5000
4x1,5+2x(2x0.75mm²), length l=20m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-7223-0250
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Baumüller DSCG and DSDG (Motor connector BG1) and AX5000
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-7223-0350
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between Baumüller DSCG and DSDG (Motor connector BG1) and AX5000
4x1,5+2x(2x0.75mm²), length l=35m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-7423-0020
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between B&R 8MS und AX5000
4x1,5+2x(2x0.75mm²), length l=2m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-7423-0030
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between B&R 8MS und AX5000
4x1,5+2x(2x0.75mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-8003-0008
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 0.8m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0010
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 1m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0020
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 2m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0030
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 3m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0040
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 4m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0050
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 5m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0060
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 6m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0070
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 7m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0080
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 8m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0090
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 9m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0100
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 10m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0110
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 11m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0120
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 12m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0130
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 13m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0140
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 14m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0150
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 15m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0160
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 16m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 205 mm (5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0170
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 17m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0180
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 18m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0190
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 19m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0200
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 20m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0210
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 1m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0220
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 22m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0230
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 23m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0240
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 24m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0250
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 25m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0260
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 26m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0270
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 27m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0280
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 28m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0290
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 29m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0300
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 30m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0310
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 31m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0320
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 32m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0330
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 33m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0340
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 34m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0350
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 35m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0360
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 36m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0370
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 37m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0380
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 38m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0390
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 39m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0400
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 40m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0410
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 41m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0420
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 42m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0440
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 44m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0450
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 45m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0460
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 46m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0470
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 47m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0480
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 48m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0500
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 50m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0510
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 51m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0550
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 55m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0600
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 60m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0630
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 63m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0650
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 65m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0700
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 70m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0800
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 80m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-0850
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 85m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8003-1000
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 100m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0010
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 1m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0020
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 2m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0030
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 3m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0040
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 4m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0050
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 5m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0060
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 6m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0070
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 7m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0080
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 8m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0090
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 9m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0100
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 10m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0110
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 11m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0120
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 12m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0130
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 13m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0140
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 14m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0150
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 15m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0160
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 16m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0170
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 17m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0180
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 18m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0190
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 19m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0200
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 20m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0210
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 21m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0220
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 22m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0230
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 23m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0240
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 24m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0250
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 25m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0270
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 27m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0280
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 28m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0290
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 29m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0300
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 30m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0310
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 31m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0320
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 32m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0330
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 33m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0350
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 35m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0370
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 37m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = (5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0400
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 40m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0420
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 42m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0450
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 45m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0500
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 50m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0530
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 53m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0550
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 55m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8004-0600
|
motor cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 60m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8022-0005
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 0.5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0008
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 0.8m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0010
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 1m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0015
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 1,5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0016
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 1.6m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0020
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 2m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0021
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 2.1m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0023
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 2.3m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0024
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 2.4m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0030
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 3m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0032
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 3,2m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0035
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 3,5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0040
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 4m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0050
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0060
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 6m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0070
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 7m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0075
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 7,5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0080
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 8m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0085
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 8,5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0090
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 9m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0095
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 9.5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0100
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 10m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0110
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 11m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0120
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 12m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0130
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 13m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0140
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 14m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0150
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 15m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0160
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 16m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0170
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 17m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0180
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 18m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0190
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 19m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0200
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 20m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0210
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 21m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0220
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 22m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0230
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 23m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0240
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 24m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0250
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 25m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0260
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 26m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0270
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 27m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0280
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 28m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0290
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 29m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0300
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 30m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0310
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 31m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0320
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 32m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0330
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 33m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0340
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 34m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0350
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 35m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0360
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 36m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0370
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 37m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0380
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 38m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0390
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 39m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0400
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 40m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0410
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 41m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0420
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 42m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0430
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 43m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0440
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/M802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 44m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0450
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 45m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0460
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 46m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0470
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 47m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0480
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 48m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0490
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 49m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0500
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 50m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0510
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 51m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0520
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 52m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0530
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 53m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0540
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 54m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke requireded.
|
Beckhoff Vietnam
|
ZK4500-8022-0550
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 55m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0560
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 56m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0570
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 57m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0580
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 58m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0590
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 59m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0600
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 60m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0610
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801xAM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 61m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0620
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM813x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 62m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0630
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM813x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 63m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0640
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 64m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0650
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 65m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0660
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 66m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0670
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 67m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0680
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 68m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0690
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 69m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0700
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 70m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0710
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 71m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0720
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 72m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0730
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 73m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0740
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 74m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0750
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 75m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0760
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 76m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0770
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 77m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0780
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 78m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0790
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 79m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0800
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 80m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0810
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 81m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke requiredd.
|
Beckhoff Vietnam
|
ZK4500-8022-0820
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 82m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0830
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 83m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0840
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 84m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0850
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 85m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0860
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 86m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0870
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 88m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0880
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 88m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0890
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 89m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0900
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 90m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0910
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 91m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0920
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 92m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0930
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 93m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0940
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 94m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0950
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 95m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0960
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 96m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0970
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 97m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0980
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 98m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-0990
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 99m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8022-1000
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802x/AM803x/AM853x and AM301x
at servo drives AX5000 (1.5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 100m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8023-0010
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 1m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0020
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 2m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0030
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 3m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0040
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 4m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0050
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 5m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0060
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 6m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0065
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 6.5m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0070
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 7m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0080
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 8m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0085
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 8.5m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0090
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 9m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0100
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 10m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0110
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 11m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0120
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 12m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0130
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 13m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0140
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 14m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0150
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 15m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0160
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 16m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0170
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 17m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0180
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 18m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0190
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 19m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = (7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0200
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 20m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0210
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 21m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0220
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 22m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0230
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 23m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0240
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 24m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0250
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 25m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0260
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 26m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0270
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 27m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0280
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 28m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0290
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 29m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0300
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 30m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0310
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 31m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0320
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 32m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0330
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 33m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 90 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8023-0340
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 34m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0350
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 35m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0360
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 36m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0370
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 37m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0380
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 38m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0390
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 39m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0400
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 40m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0410
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 41m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0420
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 42m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0430
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 43m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0440
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 44m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0450
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 45m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0460
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 46m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0470
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 47m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0480
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 48m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0490
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 49m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0500
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 50m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0510
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 51m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0520
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 52m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0530
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 53m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0540
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 54m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0550
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 55m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0560
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 56m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0570
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 57m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0580
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 58m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0590
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 59m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0600
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 60m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0610
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 61m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0620
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 62m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0630
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 63m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0640
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 64m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0650
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 65m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0660
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 66m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0670
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 67m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0680
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 68m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0690
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 69m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0700
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 70m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0710
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 71m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0720
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 72m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0730
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 73m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0740
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 74m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0750
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 75m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0760
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 76m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0770
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 77m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0780
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 78m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0790
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 79m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0800
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 80m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0810
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 81m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0820
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 82m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0830
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 83m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0840
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 84m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0850
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 85m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0860
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 86m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0870
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 87m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0880
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 88m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0890
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 89m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0900
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 90m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0910
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 91m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0920
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 92m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0930
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 93m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0940
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 94m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0950
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 95m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0960
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 96m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0970
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 97m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0980
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 98m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-0990
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 99m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8023-1000
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5x01/AX5x03/AX5x06/AX5x12
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 100m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0008
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 0.8m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8024-0010
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 1m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0020
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 2m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0030
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 3m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0040
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 4m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0050
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 5m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0060
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 6m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0070
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 7m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0080
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 8m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8024-0090
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 9m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8024-0100
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 10m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D ),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0110
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 11m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 50 m, vert. 5m
The max. cable length is 100m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0120
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 12m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0130
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 13m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0140
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 14m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0150
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 15m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0160
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 16m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0170
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 17m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0175
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 17.5m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0180
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 18m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0190
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 19m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0200
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 1m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0210
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 21m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0220
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 22m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0225
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 22.5m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0230
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 23m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0240
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 24m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0250
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 25m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =( 7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0260
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 26m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0270
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 27m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0280
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 28m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0290
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 29m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0300
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 30m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0310
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 31m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0320
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 32m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0330
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 33m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0340
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 34m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0350
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 35m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0360
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 36m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0400
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 40m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0450
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 45m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8024-0500
|
Motor power cable with M23-speedtec®,
both ends prepared for connection of
servo motors AM804x - AM806x and AM854x - AM856x
at servo drives AX5118 (18A) till AX5125 (25A),
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 50m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0006
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+ (2x1,0mm²)+ (2xAWG22)), length l=0.6m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0010
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+ (2x1,0mm²)+ (2xAWG22)), length l=1m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0012
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+ (2x1,0mm²)+ (2xAWG22)), length l=1,2m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0020
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+ (2x1,0mm²)+ (2xAWG22)), length l=2m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0030
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=3m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0040
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=4m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0050
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=5m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0060
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+ (2x1,0mm²)+ (2xAWG22)), length l=9m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0070
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=7m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0080
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=8m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0090
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=9m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0100
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=10m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0110
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=11m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0120
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=12m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0130
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+ (2x1,0mm²)+ (2xAWG22)), length l=13m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0140
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=14m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0150
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=15m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0160
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=16m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0170
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=17m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0180
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=18m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0190
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=19m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0200
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=20m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0210
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=21m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0220
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=22m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0230
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=23m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0240
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=24m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0250
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=25m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0260
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=26m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0270
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=27m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0290
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=29m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0300
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=30m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0310
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=31m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0320
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=32m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0330
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=33m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0340
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM807x (M40-Speedtec connector) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=34m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0350
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=35m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0360
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=36m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0370
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=37m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0380
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=38m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0390
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=39m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0400
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=40m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0450
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=45m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0460
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=46m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0500
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=50m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0550
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=55m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0600
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=60m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8025-0650
|
Motor power cable for AX5000 (up to 25A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec plug) and AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=65m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0010
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=1m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0020
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=2m, UL/CSA approved
flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 180 m/min, max. acceleration 5 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0030
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=3m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0040
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=4m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0050
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=5m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0055
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=5.5m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0060
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=6m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0065
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=6.5m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0070
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=7m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0075
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=7.5m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0080
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=4m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0090
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=9m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0100
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=10m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0110
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=11m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0120
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=12m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0130
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=13m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0140
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=14m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0150
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=15m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0160
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=16m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0170
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=17m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable lenght (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0180
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM806x-xTxx/AM807x-xxxx (M40-Speedtec® connector) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=18m, UL/CSA approved
highly flexible, suitable as trailing cable wit
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertical 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0190
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=19m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0200
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=20m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0210
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=21m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0220
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM806x-xTxx/AM807x-xxxx (M40-Speedtec® connector) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=22m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0230
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM806x-xTxx/AM807x-xxxx (M40-Speedtec® connector) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=23m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0240
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM806x-xTxx/AM807x-xxxx (M40-Speedtec® connector) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=24m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0250
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=25m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0260
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=26m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0270
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=27m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0280
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=28m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0290
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=29m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. cable length (in total) see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0300
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=30m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (total)see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0320
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=32m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0330
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=33m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0350
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=35m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0360
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=36m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (total)see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0370
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=37m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (total)see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0380
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=38m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (total)see user manual servo drives AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0400
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=40m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0500
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=50m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0540
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=54m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0560
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=56m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0600
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=60m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8027-0650
|
Motor power cable for AX5140 (40A)
both ends prepared for connection between
AM8x6x from winding code "Q", AM807x (M40-Speedtec® plug) and AX5000
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length l=65m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4500-8062-0020
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 2m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151.2 mm(12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0030
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 3m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151.2 mm(12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0040
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 4m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0050
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 5m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0060
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 6m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0070
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 7m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0080
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 8m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0090
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 9m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0100
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 10m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0110
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 11m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0150
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 15m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0200
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 20m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0250
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 25m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-0400
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 40m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151 mm (12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8062-1000
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 100m
UL and CSA listed.
Highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius = 151.2 mm(12 x OD),
max. torsion +/- 180° per meter
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-8063-0020
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 2m
UL and CSA listed.
highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x OD)
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8063-0030
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 3m
UL and CSA listed.
highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x OD)
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8063-0030
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 3.6m
UL and CSA listed.
highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x OD)
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8063-0050
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 5m
UL and CSA listed.
highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x OD)
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8063-0070
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 7m
UL and CSA listed.
highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x OD)
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8063-0150
|
motor cable with M23-speedtec®,, both ends prepared for
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 15m
UL and CSA listed.
highly flexible, suitable for torsion
max. 2.Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x AD)
max. torsion +/- 180°/m
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8063-0200
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 20m
UL and CSA listed.
highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x OD)
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8063-0400
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 40m
UL and CSA listed.
highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x OD)
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8063-0500
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 50m
UL and CSA listed.
highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x OD)
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-8063-1000
|
motor cable with M23 speedtec® connector, both ends prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
at servo drives AX5101/AX5103/AX5106/AX5112
4 x 1,5 + (2 x 0,75) + (2 x 22AWG) mm²
length 100m
UL and CSA listed.
highly flexible, suitable for torsion
with 2 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 154 mm (12 x OD)
max. permitted tensile load: static = 50 N/mm², dynamic 20 N/mm²
max. permitted cable lenght (in total) see documentation AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4500-9901-0020
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 2m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0030
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 3m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0050
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 5m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0060
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 6m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0080
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 8m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0100
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 10m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0120
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 12m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0150
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 15m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0200
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 20m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0230
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 23m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0250
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 25m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9901-0300
|
motor cable with M23 (9 pol.) speedtec®
both ends prepared
servo motors AM8000 at servo drives AX5140
4 x 2.5 + (2 x 0.75) + (2 x 22AWG) mm²
length 30m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius = 105 mm (7 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 22A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9902-0040
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 4m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0050
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 5m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0060
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 6m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0070
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 7m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
max. cable length 100m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0080
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 8m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0090
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 9m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0100
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 10m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0110
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 11m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0120
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 12m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0130
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 13m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0140
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 14m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0150
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 15m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0160
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 16m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0170
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 17m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0180
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 18m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0190
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 19m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0200
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 20m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0210
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 21m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0220
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 22m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0230
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 23m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0240
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 24m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0260
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 26m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0280
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 28m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0300
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 30m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0310
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 31m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
max. cable length 100m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0320
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 32m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0330
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 33m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9902-0340
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5118/AX5125
4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²
length 34m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
from 25 m motor choke required
|
Beckhoff Vietnam
|
ZK4500-9903-0050
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between wittenstein TPM with resolverback with pincontent 1 and AX5000
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-9903-0060
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between wittenstein TPM with resolverback with pincontent 1 and AX5000
4x1,5+2x(2x0.75mm²), length l=6m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-9905-0010
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 1m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9905-0030
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 3m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9905-0060
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 6m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9905-0100
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 10m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9905-0110
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 11m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9905-0140
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 14m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9905-0150
|
motor cable with M23 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 15m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9906-0005
|
Motor power cable for Demorack AX5000
for application with AM8100 (OCT) and AX5000 (up to 25A)
length l=0.5m
motor side = iTec connector 9-pole
drive side = AX5000 X13/X23 and X14/X24 connector
shielded cable
highly flexible for drag-chain use
5 Mio. bending cycles, max. 30m/s, max. 240m/s²
min. bending radius = 77mm (7x OD)
for fixed installation - min. Biegeradius = 55mm (5x OD)
Only for 24-48V supply
|
Beckhoff Vietnam
|
ZK4500-9907-0040
|
motor cable with M40 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 4m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9907-0060
|
motor cable with M40 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 6m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9907-0080
|
motor cable with M40 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 8m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9907-0100
|
motor cable with M40 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 10m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9907-0120
|
motor cable with M40 speedtec® connector (9pol),
both ends prepared for:
Servo Motors AM8000 to Servo Drives AX5140
(4 x 4 + (2 x 1,0) + (2 x 22AWG) mm²)
length 12m
UL and CSA certified.
cables for flexible use
with 5 Mio. bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius = 165 mm (10 x OD)
max. trailing length horiz. 20 m, vert. 5m
Max. cable length (in total) see user manual servo drives AX5000
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9908-0250
|
Motor power cable, both ends prepared for connection
between AM8xxx-xxCx/AM8xxx-xxDx with yTec plug and Siemens S120
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4500-9909-0860
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
(4x1.5 mm²+(2x1.0mm²)), length l=86m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 81 mm (7.5 x OD)
special cable without brake pair
|
Beckhoff Vietnam
|
ZK4500-9909-0900
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
(4x1.5 mm²+(2x1.0mm²)), length l=90m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 81 mm (7.5 x OD)
special cable without brake pair
|
Beckhoff Vietnam
|
ZK4500-9909-0920
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
(4x1.5 mm²+(2x1.0mm²)), length l=92m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 81 mm (7.5 x OD)
special cable without brake pair
|
Beckhoff Vietnam
|
ZK4500-9909-0950
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
(4x1.5 mm²+(2x1.0mm²)), length l=95m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 81 mm (7.5 x OD)
special cable without brake pair
|
Beckhoff Vietnam
|
ZK4500-9910-0080
|
Motor power cable with M40 speedtec® connector (8-pole)
both ends prepared for
AL2830-1001-9005
and servo drive AX5140
(4x4 mm² +(2x1 mm²)+(2x1.5 mm²)), length l=8m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (158mm)
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9910-0100
|
Motor power cable with M40 speedtec® connector (8-pole)
both ends prepared for
AL2830-1001-9005
and servo drive AX5140
(4x4 mm² +(2x1 mm²)+(2x1.5 mm²)), length l=10m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (158mm)
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9910-0120
|
Motor power cable with M40 speedtec® connector (8-pole)
both ends prepared for
AL2830-1001-9005
and servo drive AX5140
(4x4 mm² +(2x1 mm²)+(2x1.5 mm²)), length l=12m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (158mm)
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9910-0130
|
Motor power cable with M40 speedtec® connector (8-pole)
both ends prepared for
AL2830-1001-9005
and servo drive AX5140
(4x4 mm² +(2x1 mm²)+(2x1.5 mm²)), length l=13m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (158mm)
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9910-0140
|
Motor power cable with M40 speedtec® connector (8-pole)
both ends prepared for
AL2830-1001-9005
and servo drive AX5140
(4x4 mm² +(2x1 mm²)+(2x1.5 mm²)), length l=14m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (158mm)
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9910-0150
|
Motor power cable with M40 speedtec® connector (8-pole)
both ends prepared for
AL2830-1001-9005
and servo drive AX5140
(4x4 mm² +(2x1 mm²)+(2x1.5 mm²)), length l=15m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (158mm)
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9910-0160
|
Motor power cable with M40 speedtec® connector (8-pole)
both ends prepared for
AL2830-1001-9005
and servo drive AX5140
(4x4 mm² +(2x1 mm²)+(2x1.5 mm²)), length l=16m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (158mm)
According to DIN EN 60204-1 only for 30A continuous current!
Use at AX5140 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4500-9911-0020
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 2m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9911-0030
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 3m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9911-0040
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 4m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9911-0045
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 4.5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9911-0055
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 5,5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9911-0060
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 6m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9911-0065
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 6,5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9911-0075
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 7,5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9911-0085
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 8,5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9911-0095
|
motor cable with yTec/iTec connector, both ends prepared
servo motors AM801x/AM802/AM803x/AM853x and AM301x
at servo drives AX5000 (1,5A - 6A)
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 9,5m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
max. cable length (in total) see Documentation Servo Drive AX5000
from 25 m motor choke required
special cable with straight AX5000 connector
|
Beckhoff Vietnam
|
ZK4500-9912-0050
|
Motor power cable with special pinning and CM3 plug for
connection between AM8000 (M23 speedTec plug) at AMK Drive
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 5m
|
Beckhoff Vietnam
|
ZK4501-0003-0010
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=1m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0020
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=2m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0030
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=3m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0040
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=4m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0050
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0060
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=6m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0070
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=7m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0080
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=8m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0100
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0150
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0190
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=19m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0250
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0300
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=30m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0003-0360
|
Motor cable extension for AX5000
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=36m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0004-0040
|
Motor power cable extension for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=4m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete lenght >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0004-0050
|
Motor power cable extension for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete lenght >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0004-0090
|
Motor power cable extension for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=9m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete lenght >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0004-0100
|
Motor power cable extension for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=10m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Complete lenght >25m, motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0004-0250
|
Motor power cable extension for AX5118 (18A)
both ends prepared for connection
between AM2000 / AM3000 (till winding code "P")/ AM3500 and AX5000
4x2,5+2x(2x1mm²), length l=25m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4501-0015-0030
|
Motor power cable extension for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=3m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4501-0015-0040
|
Motor power cable extension for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=4m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4501-0015-0050
|
Motor power cable extension for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=5m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4501-0015-0060
|
Motor power cable extension for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=6m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4501-0015-0070
|
Motor power cable extension for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=7m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4501-0015-0150
|
Motor power cable extension for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=15, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4501-0015-0500
|
Motor power cable extension for AX5125 (25A)
both ends prepared for connection between
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=50, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4501-0017-0030
|
extension cable for motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 3m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4501-0017-0060
|
extension cable for motor power cable for AX5140 (40A)
4x10+2x1+2x1,5mm², length 6m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4501-0023-0010
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=1m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0020
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=2m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0027
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=2.7m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0030
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0038
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=3.8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0040
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=4m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0050
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0060
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=6m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0070
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=7m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0080
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0090
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=9m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0100
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0110
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=11m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0120
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=12m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0130
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=13m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0150
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0180
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0200
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=20m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0250
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0300
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=30m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0500
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=50m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0023-0800
|
Motor cable extension for AX5000, highly flexible
both ends prepared for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), length l=80m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
Attention: Complete length longer than 25m motor choke is necessary
|
Beckhoff Vietnam
|
ZK4501-0024-0010
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=1m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0020
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=2m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0030
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0040
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=4m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0050
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0060
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=6m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0070
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=7m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0080
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0100
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0110
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=11m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0120
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=12m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0150
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0170
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=17m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0200
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=20m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-0024-0250
|
Motor cable extension for AX5118 (18A), highly flexible
both ends prepared for connection between
AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
4x2,5+2x(2x1mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4501-8003-0010
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 1m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0020
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0030
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0035
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 3.5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0040
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 4m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0045
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 4.5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0050
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0060
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0070
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0080
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0100
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 10m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0120
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 12m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0150
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 15m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0170
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 17m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0200
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 20m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0220
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 22m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0240
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 24m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0300
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 30m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0380
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 38m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0400
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 40m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0450
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 45m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8003-0600
|
motor cable extension for motor cable ZK4500-8003-zzzz
length 60m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0020
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0050
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0060
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0070
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0080
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0090
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 9m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0100
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 10m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0120
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 12m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0170
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 17m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0200
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 20m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8004-0300
|
motor cable extension for motor cable ZK4500-8004-zzzz
length 30m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0005
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 0.5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0010
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 1m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0013
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 1.3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0015
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 1.5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0017
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 1.7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0018
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 1.8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0019
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 1.9m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0020
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0025
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 2.5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0028
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 2.8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0030
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0035
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 3.5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0037
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 3,7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0038
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 3.8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0039
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 3.9m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0040
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 4m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0050
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0051
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 5.1m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0060
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0065
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 6.5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0070
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0080
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0090
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 9m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0100
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 10m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0110
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 11m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0120
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 12m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0130
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 13m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0140
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 14m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0150
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 15m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0160
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 16m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0170
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 17m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0180
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 18m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0190
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 19m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0200
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 20m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0210
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 21m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0220
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 22m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0230
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 23m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0240
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 24m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0250
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 25m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0260
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 26m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0270
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 27m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0280
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 28m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0290
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 29m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0300
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 30m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0310
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 31m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0320
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 32m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0330
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 33m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0340
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 34m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0350
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 35m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0360
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 36m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0370
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 37m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0380
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 38m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0390
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 39m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0400
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 40m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0410
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 41m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0420
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 42m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0430
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 43m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0440
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 44m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0450
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 45m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0460
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 46m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0470
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 47m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0480
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 48m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0490
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 49m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0500
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 50m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0510
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 51m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0520
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 52m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0530
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 53m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0540
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 54m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0550
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 55m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0560
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 56m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0570
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 57m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0580
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 58m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0590
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 59m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0600
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 60m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0610
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 61m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0620
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 62m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0630
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 63m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0640
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 64m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0650
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 65m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0660
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 66m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0670
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 67m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0680
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 68m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0690
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 69m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0700
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 70m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0710
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 71m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0720
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 72m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0730
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 73m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0740
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 74m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0750
|
motor cable extension for motor cable
ZK4500-8022-xxxx and ZK4800-8022-xxxx
length 75m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0760
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 76m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0770
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 77m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0780
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 78m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0790
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 79m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0800
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 80m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0810
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 81m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0820
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 82m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0830
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 83m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0840
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 84m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0850
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 85m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0860
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 86m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0870
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 87m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0880
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 88m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0890
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 89m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0900
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 90m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0910
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 91m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0920
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 92m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0930
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 93m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0940
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 94m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0950
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 95m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0960
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 96m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0970
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 97m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0980
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 98m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-0990
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 99m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8022-1000
|
motor cable extension for motor cable ZK4500-8022-zzzz
length 100m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0005
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 0,5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0010
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 1m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0020
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0022
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 2.2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0027
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 2,7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0030
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0038
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 3,8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0040
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 4m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0041
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 4.1m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0044
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 4.4m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0050
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0060
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0070
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0075
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 7,5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0080
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0090
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 9m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0100
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 10m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0110
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 11m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0120
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 12m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0130
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 13m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0140
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 14m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0150
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 15m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0160
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 16m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0170
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 17m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0180
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 18m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0190
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 19m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0200
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 20m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0210
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 21m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0220
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 22m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0230
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 23m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0240
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 24m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0250
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 25m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0260
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 26m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0270
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 27m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0280
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 28m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0290
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 29m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0300
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 30m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0310
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 31m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0320
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 32m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0330
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 33m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0340
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 34m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0350
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 35m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0360
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 36m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0370
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 37m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0380
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 38m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0390
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 39m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0400
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 40m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0410
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 41m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0420
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 42m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0430
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 43m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0440
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 44m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0450
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 45m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0460
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 46m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0470
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 47m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0480
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 48m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0490
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 49m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0500
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 50m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0510
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 51m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0520
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 52m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0530
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 53m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0540
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 54m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0550
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 55m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0560
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 56m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0570
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 57m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0580
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 58m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0590
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 59m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0600
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 60m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0610
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 61m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0620
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 62m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0630
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 63m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0640
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 64m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0650
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 65m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0660
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 66m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0670
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 67m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0680
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 68m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0690
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 69m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0700
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 70m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0710
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 71m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0720
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 72m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0730
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 73m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0740
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 74m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0750
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 75m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0760
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 76m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0770
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 77m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0780
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 78m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0790
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 79m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0800
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 80m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0810
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 81m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0820
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 82m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0830
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 83m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0840
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 84m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0850
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 85m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0860
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 86m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0870
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 87m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0880
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 88m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0890
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 89m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0900
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 90m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0910
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 91m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0920
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 92m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0930
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 93m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0940
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 94m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0950
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 95m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0960
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 96m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0970
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 97m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0980
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 98m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-0990
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 99m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8023-1000
|
motor cable extension for motor cable ZK4500-8023-zzzz
length 100m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8024-0008
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 0.8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0010
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 1m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0020
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0030
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0040
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 4m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0050
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0060
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0070
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0075
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 7,5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0080
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0090
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 9m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0100
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 10m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0110
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 11m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0120
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 12m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0130
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 13m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0140
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 14m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0150
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 15m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0200
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 20m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0210
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 21m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0250
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 25m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0300
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 30m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0320
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 32m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0350
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 35m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8024-0400
|
motor cable extension for motor cable ZK4500-8024-xxxx
length 40m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4501-8025-0010
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 1m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0020
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0030
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0040
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 4m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0050
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0060
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0070
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0080
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0090
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 9m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0100
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 10m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0110
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 11m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0120
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 12m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0130
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 13m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0140
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 14m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0150
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 15m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0160
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 16m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0170
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 17m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0180
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 18m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0210
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 21m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0220
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 22m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0230
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 23m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0240
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 24m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0250
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 25m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0270
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 27m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0280
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 28m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0350
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 35m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8025-0450
|
motor cable extension for motor cable ZK4500-8025-zzzz
length 45m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8027-0010
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 1m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0020
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0030
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0040
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 4m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0050
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0060
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0070
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0080
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0100
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 10m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0110
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 11m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0120
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 12m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0130
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 13m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0180
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 18m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0210
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 21m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0220
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 22m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0250
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 25m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0290
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 29m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0310
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 31m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8027-0390
|
motor cable extension for motor cable ZK4500-8027-zzzz
length 39m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4501-8062-0020
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0030
|
motor cable extension for motor cable ZK4500-8062-xxxx / ZK4800-8062-zzzz
length 3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0040
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 4m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0050
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0060
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0070
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0100
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 10m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0120
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 12m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0150
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 15m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0160
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 16m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8062-0180
|
motor cable extension for motor cable ZK4500-8062-zzzz / ZK4800-8062-zzzz
length 18m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0020
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0030
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0036
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 3.6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0038
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 3.8m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0039
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 3.9m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0050
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 5m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0060
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 6m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0070
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 7m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0100
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 10m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0120
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 12m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0130
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 13m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0150
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 15m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8063-0200
|
motor cable extension for motor cable ZK4500-8063-zzzz / ZK4800-8063-zzzz
length 20m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8064-0010
|
motor cable extension for motor cable ZK4500-8064-xxxx / ZK4800-8064-zzzz
length 1m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8064-0030
|
motor cable extension for motor cable ZK4500-8064-xxxx / ZK4800-8064-zzzz
length 3m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-8064-0110
|
motor cable extension for motor cable ZK4500-8064-xxxx / ZK4800-8064-zzzz
length 11m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-9901-0039
|
Motor cable extension für motor cable ZK4504-9901-xxxx
(4x6+(2x1.0)+(2x1.5mm²))
Length 3,9m
|
Beckhoff Vietnam
|
ZK4501-9901-0041
|
Motor cable extension für motor cable ZK4504-9901-xxxx
(4x6+(2x1.0)+(2x1.5mm²))
Length 4.1m
|
Beckhoff Vietnam
|
ZK4501-9901-0043
|
Motor cable extension für motor cable ZK4504-9901-xxxx
(4x6+(2x1.0)+(2x1.5mm²))
Length 4.3m
|
Beckhoff Vietnam
|
ZK4501-9901-0045
|
Motor cable extension für motor cable ZK4504-9901-xxxx
(4x6+(2x1.0)+(2x1.5mm²))
Length 4.5m
|
Beckhoff Vietnam
|
ZK4501-9901-0047
|
Motor cable extension für motor cable ZK4504-9901-xxxx
(4x6+(2x1.0)+(2x1.5mm²))
Length 4.7m
|
Beckhoff Vietnam
|
ZK4501-9902-0030
|
motor cable extension AM8000, 4mm², M23 speedtec® connector
length 3m
UL and CSA certified.
The max. cable length (in total) is 50m,
for length >= 25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-9902-0040
|
motor cable extension AM8000, 4mm², M23 speedtec® connector
length 4m
UL and CSA certified.
The max. cable length (in total) is 50m,
for length >= 25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-9902-0050
|
motor cable extension AM8000, 4mm², M23 speedtec® connector
length 5m
UL and CSA certified.
The max. cable length (in total) is 50m,
for length >= 25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-9902-0060
|
motor cable extension AM8000, 4mm², M23 speedtec® connector
length 6m
UL and CSA certified.
The max. cable length (in total) is 50m,
for length >= 25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-9902-0080
|
motor cable extension AM8000, 4mm², M23 speedtec® connector
length 8m
UL and CSA certified.
The max. cable length (in total) is 50m,
for length >= 25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-9902-0110
|
motor cable extension AM8000, 4mm², M23 speedtec® connector
length 11m
UL and CSA certified.
The max. cable length (in total) is 50m,
for length >= 25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-9902-0150
|
motor cable extension AM8000, 4mm², M23 speedtec® connector
length 15m
UL and CSA certified.
The max. cable length (in total) is 50m,
for length >= 25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4501-9907-0020
|
motor cable extension for AM8000 from iTec to M23
motor side = iTec
drive side = M23
length 2m
UL and CSA listed
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4502-0003-0250
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0260
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=26m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0270
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=27m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0280
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=28m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0300
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=30m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0350
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=35m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0360
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=36m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0380
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=38m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0400
|
Motor power cable for AX5x01 till AX5112with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=40m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0420
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=42m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0440
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=44m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0480
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=48m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0500
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=50m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-0800
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=80m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0003-1000
|
Motor power cable for AX5x01 till AX5112 with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=100m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0260
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=26m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0300
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=30m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0310
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=31m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0320
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=32m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0340
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=34m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0350
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=35m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0370
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=37m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0400
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=40m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0430
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=43m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0500
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=50m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0004-0850
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=85m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4502-0015-0280
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=28m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0015-0290
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=29m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0015-0300
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=30m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0015-0320
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=32m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0015-0350
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=35m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0015-0370
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=37m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0015-0380
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=38m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0015-0410
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=41m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0015-0450
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=40m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0015-0500
|
Motor power cable for AX5125 (25A) with cable length >25m
both ends prepared for connection between motor choke and motor
AM2000 / AM3000 (beginning with winding code "Q) on AX5000
4x4+2x1+2x1,5mm², length l=50m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4502-0023-0250
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0260
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=26m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0270
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=27m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0280
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=28m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0290
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=29m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0300
|
Motor power cable for AX5000, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=30m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0310
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=31m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0320
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=32m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0330
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=33m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0350
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=35m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0370
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=37m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0380
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=38m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0400
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=40m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0450
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=45m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0470
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=47m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0500
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=50m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0520
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=52m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0530
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=53m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0550
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=55m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0600
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=60m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0650
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=65m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0023-0800
|
Motor power cable for AX5x01 till AX5112, with cable length >25m
both ends prepared for connection
between motor choke and motor AL2000/AM2000/AM3000/AM3500
4x1,5+2x(2x0.75mm²), length l=80m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4502-0024-0260
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=26m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0270
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=27m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0280
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=28m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0300
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=30m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0310
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=31m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0320
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=32m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0330
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=33m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0340
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=34m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0350
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=35m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0370
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=37m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0400
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=40m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0430
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=43m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0440
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=44m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0450
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=45m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0460
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=46m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0500
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=50m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0550
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=55m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4502-0024-0600
|
Motor power cable for AX5118, beginning with cable length >25m
both ends prepared for connection
between motor choke and motor
AM2000 / AM3000 (till winding code "P") / AM3500
4x2,5+2x(2x1mm²), length l=60m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4504-0003-0010
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=1m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0030
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM350.0
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=3m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0050
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0080
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=8m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0100
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=10m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0120
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=12m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0150
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=15m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0170
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=17m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0200
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=20m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0220
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=22m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0250
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=25m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0003-0300
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=30m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Motor choke is necessary
|
Beckhoff Vietnam
|
ZK4504-0003-0350
|
Motor power cable for AX5x01 till AX5112 (1,5A till 12A)
only motor end prepared for connection
to AM2000 / AM3000 / AL2000 / AM3500.
(AX5000 side - cutted).
4x1,5+2x(2x0.75mm²), length l=35m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
Attention: Motor choke is necessary
|
Beckhoff Vietnam
|
ZK4504-0004-0030
|
Motor power cable for AX5118 (18A)
only motor end prepared for connection
to AM2000 / AM3000 (till winding code "P")/ AM350.0
(AX5000 side - cutted).
4x2,5+2x(2x1mm²), length l=3m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0004-0050
|
Motor power cable for AX5118 (18A)
only motor end prepared for connection
to AM2000 / AM3000 (till winding code "P")/ AM3500
(AX5000 side - cutted).
4x2.5+2x(2x1mm²), length l=5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0004-0080
|
Motor power cable for AX5118 (18A)
only motor end prepared for connection
to AM2000 / AM3000 (till winding code "P")/ AM350.0
(AX5000 side - cutted).
4x2,5+2x(2x1mm²), length l=8m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4504-0017-0050
|
Motor power cable for
connection between AX5160 (60A) and AM307x-xQxx (M40 8 pole)
controller side = wire end, shield window and thermo/brake connector
4x10 + 2x1 + 2x1,5mm², length 5m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-0017-0100
|
Motor power cable for
connection between AX5160 (60A) and AM307x-xQxx (M40 8 pole)
controller side = wire end, shield window and thermo/brake connector
4x10 + 2x1 + 2x1,5mm², length 10m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-0017-0150
|
Motor power cable for
connection between AX5160 (60A) and AM307x-xQxx (M40 8 pole)
controller side = wire end, shield window and thermo/brake connector
4x10 + 2x1 + 2x1,5mm², length 15m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-0017-0200
|
Motor power cable for
connection between AX5160 (60A) and AM307x-xQxx (M40 8 pole)
controller side = wire end, shield window and thermo/brake connector
4x10 + 2x1 + 2x1,5mm², length 20m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
//auch für Sondermotor Voortman AM807x geeignet (weil kein OCT)
|
Beckhoff Vietnam
|
ZK4504-0018-0100
|
Motor power cabl 16mm²e
Motor side prepared for: AM307x-xQxx (M40)
Drive side: Wire end
4x10+2x2x1,5mm², UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4504-0018-0150
|
Motor power cabl 16mm²e
Motor side prepared for: AM307x-xQxx (M40)
Drive side: Wire end
4x10+2x2x1,5mm², UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
length 15m
|
Beckhoff Vietnam
|
ZK4504-0024-0010
|
Motor power cable for 18A
motor side prepared for connection of
AM2000 / AM3000 (till winding code "P) / AM3500
(AX5000 side = cut)
(4x2,5mm²+2x(2x1mm²)), length l=1m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 95mm (7 x outside diameter)
|
Beckhoff Vietnam
|
ZK4504-0024-0050
|
Motor power cable for 18A
motor side prepared for connection of
AM2000 / AM3000 (till winding code "P) / AM3500
(AX5000 side = cut)
(4x2,5mm²+2x(2x1mm²)), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 95mm (7 x outside diameter)
|
Beckhoff Vietnam
|
ZK4504-8003-0070
|
motor cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 7m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8003-0100
|
motor cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 10m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8003-0150
|
motor cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 15m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8003-0190
|
motor cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 19m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8003-0230
|
motor cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 23m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8003-0250
|
motor cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 25m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8003-0400
|
motor cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 40m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8004-0100
|
motor cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x - AM806x and AM854x - AM856x
(except AM806x-xTxx)
drive side: open
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 10m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8018-0050
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 5m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8018-0080
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 8m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8018-0090
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 9m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8018-0100
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 10m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8018-0110
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 11m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8018-0120
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 12m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8018-0150
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 15m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8018-0170
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 17m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8018-0180
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 18m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8018-0200
|
Motor power cable for
connection between AX5172 (72A) and AM807x,AM8x6x from "Q" (M40 9pole)
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 20m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8022-0070
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802x/AM803x and AM301x
drive side: open
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 7m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8022-0100
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802/AM803x and AM301x
drive side: Wire end
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 10m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8022-0110
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802/AM803x and AM301x
drive side: open
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 11m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8022-0120
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802x/AM803x and AM301x
drive side: Wire end
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 12m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8022-0150
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802x/AM803x and AM301x
drive side: open
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 15m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8022-0200
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802x/AM803x and AM301x
drive side: Wire end
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 20m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8022-0210
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802x/AM803x and AM301x
drive side: open
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 21m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8022-0220
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802x/AM803x and AM301x
drive side: open
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 22m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8022-0250
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802x/AM803x and AM301x
drive side: Wire end
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 25m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8022-0400
|
motor cable with yTec/iTec connector,
motor side prepared for:
servo motors AM801x/AM802/AM803x and AM301x
drive side: Wire end
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
length 40m
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4504-8023-0070
|
motor cable with M23 speedtec® connector, both ends prepared
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 7m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8023-0080
|
motor cable with M23 speedtec® connector, both ends prepared
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 8m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8023-0100
|
motor cable with M23-speedtec® connector, both ends prepared
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except of AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 10m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8023-0150
|
motor cable with M23 speedtec® connector, both ends prepared
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 15m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8023-0250
|
motor cable with M23 speedtec® connector, both ends prepared
motor side prepared for:
servo motors AM804x-AM806x/AM883x-AM886x/AM854x-AM856x
(except AM806x-xTxx)
drive side: open
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length 25m
UL and CSA listed.
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8024-0050
|
Motor power cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x - AM806x and AM854x - AM856x
drive side: open
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 5m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8024-0100
|
Motor power cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x - AM806x and AM854x - AM856x
drive side: open
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 10m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8024-0200
|
Motor power cable with M23-speedtec®,
motor side prepared for:
servo motors AM804x - AM806x and AM854x - AM856x
drive side: open
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 20m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8025-0090
|
motor cable with M40 speedtec® connector, both ends prepared
motor side prepared for:
AM8x6x from winding code "Q", AM807x
drive side: open
(4x4,0mm²+(2x1,0mm²)+(2xAWG22)), length l=9m, UL/CSA approved
highly flexible, suitable as trailing cable with
max. 5 million bending cycles,
max. 240 m/min, max. acceleration 30 m/s²
max. trailing length 20m, vertcial 5m.
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4504-8027-0010
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 1m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0020
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 2m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0030
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 3m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0040
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 4m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0050
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 5m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0060
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 6m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0070
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 7m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0080
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 8m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0090
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 9m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0100
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 10m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0110
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 11m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0120
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 12m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0130
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 13m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0150
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 15m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0160
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 16m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0180
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 18m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0200
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 20m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0210
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 21m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0230
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 23m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0250
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 25m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0300
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 30m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0350
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 35m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0380
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 38m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-8027-0520
|
Motor power cable for
connection between AX5160 (60A) and AM807x,AM8x6x from "Q" (M40 9pole)
controller side = wire end, shield window and thermo/brake connector
(4x10,0mm²+(2x1,5mm²)+(2xAWG22)), length 38m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4504-9901-0060
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 6m
|
Beckhoff Vietnam
|
ZK4504-9901-0100
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 10m
|
Beckhoff Vietnam
|
ZK4504-9901-0200
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 20m
|
Beckhoff Vietnam
|
ZK4504-9901-0240
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 24m
|
Beckhoff Vietnam
|
ZK4504-9901-0250
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 25m
|
Beckhoff Vietnam
|
ZK4504-9901-0270
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 27m
|
Beckhoff Vietnam
|
ZK4504-9901-0320
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 32m
|
Beckhoff Vietnam
|
ZK4504-9901-0360
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 36m
|
Beckhoff Vietnam
|
ZK4504-9901-0390
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 39m
|
Beckhoff Vietnam
|
ZK4504-9901-0410
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 41m
|
Beckhoff Vietnam
|
ZK4504-9901-0420
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 42m
|
Beckhoff Vietnam
|
ZK4504-9901-0470
|
Motor power cable, one side prepared,
motor side = AM8000 (M40 speedTec plug)
controller side = flying leads / wire end
(4x6+(2x1.0)+(2x1.5mm²))
length 47m
|
Beckhoff Vietnam
|
ZK4504-9902-0200
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 20m
|
Beckhoff Vietnam
|
ZK4504-9902-0240
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 24m
|
Beckhoff Vietnam
|
ZK4504-9902-0250
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 25m
|
Beckhoff Vietnam
|
ZK4504-9902-0270
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 27m
|
Beckhoff Vietnam
|
ZK4504-9902-0320
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 32m
|
Beckhoff Vietnam
|
ZK4504-9902-0360
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 36m
|
Beckhoff Vietnam
|
ZK4504-9902-0390
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 39m
|
Beckhoff Vietnam
|
ZK4504-9902-0410
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 41m
|
Beckhoff Vietnam
|
ZK4504-9902-0420
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 42m
|
Beckhoff Vietnam
|
ZK4504-9902-0470
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at Rexroth Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 47m
|
Beckhoff Vietnam
|
ZK4504-9903-0050
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at AMK Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 5m
|
Beckhoff Vietnam
|
ZK4504-9903-0070
|
Motor power cable for
connection between AM8000 (M23 speedTec plug) at AMK Drive
controller side = flying leads / wire end
(4x1.5 +(2x0.75)+(2xAWG22))
length 7m
|
Beckhoff Vietnam
|
ZK4504-9904-0050
|
Motor power cable for
connection between AM8000 (M40 plug) at AMK Drive
controller side = flying leads / wire end
(4x10 +(2x1.5)+(2xAWG22))
length 5m
|
Beckhoff Vietnam
|
ZK4504-9904-0070
|
Motor power cable for
connection between AM8000 (M40 plug) at AMK Drive
controller side = flying leads / wire end
(4x10 +(2x1.5)+(2xAWG22))
length 7m
|
Beckhoff Vietnam
|
ZK4505-0003-0050
|
Motor power cable one side prepared for AX5x01 to AX5112 (1,5A-12A)
motor end cut
4x1,5+2x(2x0.75mm²), length l=5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4505-0004-0010
|
Motor power cable, one side prepared for AX5118 (18A)
motor side cut
4x2,5+2x(2x1mm²), length l=1m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
|
Beckhoff Vietnam
|
ZK4505-0017-0010
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 1m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0030
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 3m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0040
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 4m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0050
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 5m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0060
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 6m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0090
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 9m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0100
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 10m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0130
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 13m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0150
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 15m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0190
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 19m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0200
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 20m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0210
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 21m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0250
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 25m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0360
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 36m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0370
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 37m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0017-0380
|
Motor power cable, one side prepared for AX5140 (40A)
motor end cut
4x10+2x1+2x1,5mm², length 38m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
Max. permitted cable length (in total) see user manual AX5000
|
Beckhoff Vietnam
|
ZK4505-0024-0100
|
Motor power cable one side prepared for AX5118 (18A)
motor end cut
4x2,5+2x(2x1mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
|
Beckhoff Vietnam
|
ZK4505-4015-0130
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x4+2x1,5 (2x1,mm²), length l=13m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4505-4015-0160
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x4+2x1,5 (2x1,mm²), length l=16m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4505-4015-0180
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x4+2x1,5 (2x1,mm²), length l=18m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4505-4015-0200
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x4+2x1,5 (2x1,mm²), length l=20m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4505-4015-0210
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x4+2x1,5 (2x1,mm²), length l=21m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4505-4015-0250
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x4+2x1,5 (2x1,mm²), length l=25m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4505-4015-0350
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x4+2x1,5 (2x1,mm²), length l=35m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0050
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0100
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0150
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0180
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0200
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=20m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0230
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=23m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0240
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=24m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0250
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0280
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=28m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-4023-0300
|
Motor power cable for SEW-CM motors to AX5000
motor side with ring terminal
4x1,5+2x (2x0,75mm²), length l=30m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter (85mm)
|
Beckhoff Vietnam
|
ZK4505-8023-0010
|
Motor power cable one side prepared for AX5x01 to AX5112 (1,5A-12A)
motor end cut
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length l=1m
UL/CSA approved
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4505-8023-0150
|
Motor power cable one side prepared for AX5x01 to AX5112 (1,5A-12A)
motor end cut
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
length l=15m
UL/CSA approved
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D)
max. trailing length horiz. 20 m, vert. 5m
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4505-8024-0150
|
Motor power cable one side prepared for AX5118 (18A) till AX5125 (25A)
motor end cut
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
length 15m,
UL/CSA approved,
highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m
The max. cable length is 50m,
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4506-8018-0030
|
Motor power cable for
connection between AX5172 (72A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 3m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8018-0050
|
Motor power cable for
connection between AX5172 (72A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 5m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8018-0100
|
Motor power cable for
connection between AX5172 (72A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 10m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8018-0300
|
Motor power cable for
connection between AX5172 (72A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x16,0mm²+2x(2x1,5mm²)), length 30m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
min. bending radius =10 x D (250mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 70A continuous current!
Use at AX5172 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8027-0010
|
Motor power cable for
connection between AX5160 (60A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x10,0mm²+2x(2x1,5mm²)), length 1m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D (209mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8027-0050
|
Motor power cable for
connection between AX5160 (60A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x10,0mm²+2x(2x1,5mm²)), length 5m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D (209mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8027-0060
|
Motor power cable for
connection between AX5160 (60A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x10,0mm²+2x(2x1,5mm²)), length 6m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D (209mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8027-0080
|
Motor power cable for
connection between AX5160 (60A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x10,0mm²+2x(2x1,5mm²)), length 8m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D (209mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8027-0100
|
Motor power cable for
connection between AX5160 (60A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x10,0mm²+2x(2x1,5mm²)), length 10m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D (209mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8027-0140
|
Motor power cable for
connection between AX5160 (60A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x10,0mm²+2x(2x1,5mm²)), length 14m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D (209mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4506-8027-0200
|
Motor power cable for
connection between AX5160 (60A) and AM8074 from "T" via terminal box
motor side = with cable gland suitable for terminal box
drive side = wire end, shield window and thermo/brake connector
(4x10,0mm²+2x(2x1,5mm²)), length 20m, UL/CSA approved
suitable for highly flex use (e.g. drag chain):
max. 5 million cycles, max. 240 m/min, max. acceleration 30 m/s²
min. bending radius =10 x D (209mm)
max. cable length (in total) see Documentation Servo Drive AX5000
EMC accessorie can be necessary
According to DIN EN 60204-1 only for 52A continuous current!
Use at AX5160 only for peak current capability!
|
Beckhoff Vietnam
|
ZK4509-0003-zzzz
|
Motor power cable for AX5000, not prepared
Connection between
AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²), UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
For length >25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4509-0004-zzzz
|
Motor power cable for AX5118 (18A) not prepared
4x2,5+2x(2x1mm²), UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 210 mm
For lenght >25m a motor choke is required
|
Beckhoff Vietnam
|
ZK4509-0015-zzzz
|
Motor power cable for AX5125 (25A), not prepared
4x4+2x1+2x1,5mm², length l=xxx m, UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (150mm
|
Beckhoff Vietnam
|
ZK4509-0016-zzzz
|
Motor power cable for AX5125 (25A), not prepared
4x6+(2x1+2x1,5mm²), UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4509-0017-zzzz
|
Motor power cable for AX5140 (40A), not prepared
(4x10mm²+(2x1mm²)+(2x1,5mm²)), UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4509-0018-zzzz
|
Motor power cable for AX5160 (60 A), not prepared
(4x16mm²+2x(2x1,5mm²)), UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4509-0019-0zzz
|
Motor power cable for AX5172 (72 A), not prepared
(4x25mm²+2x(2x1,5mm²)), UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 10 million cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius 10 x outside diameter (225 mm)
|
Beckhoff Vietnam
|
ZK4509-0019-1zzz
|
Motor power cable for AX5190 (90 A), not prepared
(4x35mm²+2x(2x1,5mm²)), UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
bending radius 7xOD for fixed installation, 10xOD for dynamic use
|
Beckhoff Vietnam
|
ZK4509-0019-2zzz
|
Motor power cable for AX5191 (143A) / AX5192 (170A), not prepared
(4x50mm²+2x(2x2,5mm²)), UL/CSA approved
suitable for flex use (e.g. drag chain):
max. 5 million cycles, max. 180 m/min, max. acceleration 4 m/s²
bending radius 7xOD for fixed installation, 10xOD for dynamic use
|
Beckhoff Vietnam
|
ZK4509-0023-zzzz
|
Motor power cable for AX5000, not prepared, for connection
between AM2000 / AM3000 / AL2000 and AX5000
4x1,5+2x(2x0.75mm²),UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 90 mm
|
Beckhoff Vietnam
|
ZK4509-0024-zzzz
|
Motor power cable for AX5118 (18A), not prepared for connection
between AM2000 / AM3000 (till winding code "P) / AM3500 on AX5000
(4 x 2,5 + 2x( 2 x 1mm²)), UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius (97mm 7 x OD)
Max. permitted cable length see documentation AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4509-8003-zzzz
|
motor cable 1,5mm² (OCT) for AX5000, not prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+(2xAWG22))
length 19m
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4509-8004-zzzz
|
motor cable 2,5mm² (OCT) for AX5000, not prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x2,5mm²+ (2x1mm²)+(2xAWG22))
UL and CSA listed.
suitable for non-flexible laying and limited flexible use:
max. 50.000 bending cycles, max. 180 m/min, max. 5m/s²,
min. bending radius =(5 x D)
The max. cable length is 100m,
for length >=26m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4509-8022-zzzz
|
motor cable with yTec/iTec connector, not prepared
servo motors AM802/AM803x and AM301x at servo drives AX5000
(4x1,0mm² + (2x0,75mm²) + (2xAWG22))
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. cable length is 100m,
for length >=26m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4509-8023-zzzz
|
motor cable 1,5mm² (OCT) for AX5000, not prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2x0,75mm²)+ (2xAWG22))
UL and CSA listed.
suitable for highly dynamic application, for draig-chain use:
max. 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
max. trailing length 20m, vertical 5m.
min. bending radius =(7 x D)
Max. permitted cable length see documentation AX5000
for length >=25m a motor choke is required.
max. cable length (in total) see Documentation Servo Drive AX5000
|
Beckhoff Vietnam
|
ZK4509-8024-zzzz
|
motor cable 2,5mm² (OCT) for AX5000, not prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x2,5mm²+ (2x1,0mm²)+ (2xAWG22))
UL and CSA listed.
suitable for highly dynamic application, for draig-chain use:
max. 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
max. trailing length 20m, vertical 5m.
min. bending radius =(7 x D)
max. cable length (in total) see Documentation Servo Drive AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4509-8025-zzzz
|
motor cable 4mm² (OCT) for AX5000, not prepared
servo motors AM8x6x from winding code "Q" and
AM807x (M40-speedtec-plug) at servo drives AX5000
(4x4,0mm²+(2x1,0mm²)+(2xAWG22))
UL and CSA listed.
suitable for highly dynamic application, for draig-chain use:
max. 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
max. trailing length 20m, vertical 5m.
min. bending radius =(7 x D)
Max. permitted cable length see documentation AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4509-8027-zzzz
|
motor cable 10mm² (OCT) for AX5000, not prepared
Servomotoren AM8x6x ab Wicklungscode "Q" und
AM807x (M40-Speedtec-Stecker) an Servoverstärkern AX5000
(4x10mm²+(2x1,5mm²)+(2xAWG22))
UL and CSA listed.
suitable for highly dynamic application, for draig-chain use:
max. 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
max. trailing length 20m, vertical 5m.
min. bending radius =(10 x D)
Max. permitted cable length see documentation AX5000
for length >=25m a motor choke is required.
|
Beckhoff Vietnam
|
ZK4509-8222-zzzz
|
motor cable with yTec/iTec connector, not prepared
servo motors AM801x/AM802/AM803x and AM301x at servo drives AX5000
(4x1,0mm² + (2xAWG26))
UL and CSA listed.
Highly flexible, suitable as trailing cable
with 5 Mio. bending cycles, max. 240 m/min, max, 30 m/s²
min. bending radius =(7 x D),
max. trailing length horiz. 20 m, vert. 5m.
The max. permitted cable length is 25m,
|
Beckhoff Vietnam
|
ZK4509-8223-zzzz
|
motor cable 1,5mm² (OCT) for AX5000, not prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x1,5mm²+ (2xAWG26))
UL and CSA listed.
suitable for highly dynamic application, for draig-chain use:
max. 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
max. trailing length 20m, vertical 5m.
min. bending radius =(7 x D)
The max. permitted cable length is 25m,
|
Beckhoff Vietnam
|
ZK4509-8224-zzzz
|
motor cable 2,5mm² (OCT) for AX5000, not prepared
servo motors AM804x-AM806x/AM883x-AM886x/AM853x-AM856x
(except AM806x-xTxx)
at servo drives AX5000
(4x2,5mm²+ (2xAWG26))
UL and CSA listed.
suitable for highly dynamic application, for draig-chain use:
max. 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
max. trailing length 20m, vertical 5m.
min. bending radius =(7 x D)
The max. permitted cable length is 25m,
|
Beckhoff Vietnam
|
ZK4509-8225-zzzz
|
motor cable 4mm² (OCT) for AX5000, not prepared
servo motors AM8x6x from winding code "Q" and
AM807x (M40-speedtec-plug) at servo drives AX5000
(4x4,0mm²+(2xAWG26))
UL and CSA listed.
suitable for highly dynamic application, for draig-chain use:
max. 5 Mio. bending cycles, max. 240 m/min, max. 30m/s²,
max. trailing length 20m, vertical 5m.
min. bending radius =(7 x D)
The max. permitted cable length is 25m.
|
Beckhoff Vietnam
|
ZK4510-0000-0008
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=0.8m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0010
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=1m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0015
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=1.5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0020
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=2m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0030
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=3m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0040
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=4m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0050
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=5m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0060
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=6m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0070
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=7m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0080
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=8m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0090
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=9m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0100
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=10m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0110
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=11m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0120
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=12m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0130
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=13m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0140
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=14m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0150
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=15m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0160
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=16m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0170
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=17m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0180
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=18m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0190
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=19m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0200
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=20m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0210
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=21m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0220
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=22m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0230
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=23m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0240
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=24m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0250
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=25m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0260
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=26m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0270
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=27m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0300
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=30m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0340
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=34m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0350
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=35m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0370
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=37m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0400
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=40m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0430
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=43m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0500
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=50m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-0850
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=85m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0000-1000
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=100m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0010
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=1m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0015
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=1,5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0020
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=2m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0030
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0040
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=4m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0050
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0056
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=5.6m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0058
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=5.8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0060
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=6m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0065
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=6.5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0070
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=7m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0080
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0090
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=9m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0100
|
encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0110
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=11m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0120
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=12m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0130
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=13m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0140
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=14m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0150
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0160
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=16m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0170
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=17m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0180
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0190
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=19m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0200
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=20m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0210
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=21m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0220
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=22m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0230
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=23m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0240
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=24m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0250
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0260
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=26m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0270
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=27m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0280
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=28m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0290
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=29m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0300
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=30m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0310
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=31m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0320
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=32m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0330
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=33m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0340
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=34m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0350
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=35m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0360
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=36m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0370
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=37m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0380
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=38m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0400
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=40m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0430
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=43m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0440
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=44m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0450
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=45m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0470
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=47m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0500
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=50m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0530
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=53m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0550
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=55m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0600
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=60m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0650
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=65m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-0700
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=70m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0020-1000
|
Encoder cable for AX5000, both ends prepared for connection
between AM3000 / AL2000 and AX5000
7x2x0.14+2x0.5mm², length l=100m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0020
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length =5m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0030
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length =3m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0050
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length =5m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0100
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length = 10m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0110
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length = 11m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0120
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length = 12m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0130
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length = 13m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0140
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length = 14m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0150
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length = 15m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0160
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length = 16m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0170
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length = 17m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0220
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length l=22m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0230
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length l=23m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0240
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length l=24m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0120-0250
|
Encoder cable absolute encoder AM2000, both ends prepared for
connection between AM2000 and AX5000
length l=25m, with UL and CSA approval
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0210-0010
|
Encoder cable for AX5000, both ends prepared for connection
between AM301x (yTec)/ AM8000 and AX5000
4x2,5+2x(2x0,75mm²), length l=1m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0210-0030
|
Encoder cable for AX5000, both ends prepared for connection
between AM301x (yTec)/ AM8000 and AX5000
4x2,5+2x(2x0,75mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0210-0040
|
Encoder cable for AX5000, both ends prepared for connection
between AM301x (yTec)/ AM8000 and AX5000
4x2,5+2x(2x0,75mm²), length l=4m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0210-0050
|
Encoder cable for AX5000, both ends prepared for connection
between AM301x (yTec)/ AM8000 and AX5000
4x2,5+2x(2x0,75mm²), length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0210-0100
|
Encoder cable for AX5000, both ends prepared for connection
between AM301x (yTec)/ AM8000 and AX5000
4x2,5+2x(2x0,75mm²), length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0210-0150
|
Encoder cable for AX5000, both ends prepared for connection
between AM301x (yTec)/ AM8000 and AX5000
4x2,5+2x(2x0,75mm²), length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-0420-0030
|
Encoder cable for AX5118 (18A)
both ends prepared for connection between
AM2000 / AM3000 / AM3500 on AX5000
7x2x0,14+(2x0,5mm²), length l=3m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius 7 x outside diameter
encoder connector made of stainless steel (V2A)
|
Beckhoff Vietnam
|
ZK4510-4020-0040
|
Encoder cable for AX5000, both ends prepared for connection
between CFM71/DFS56-Motoren (SEW-Typ.-Nr. 1989308) and AX5000
7x2x0.14+2x0.5mm², length l=4m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4020-0050
|
Encoder cable for AX5000, both ends prepared for connection
between CFM71/DFS56-Motoren (SEW-Typ.-Nr. 1989308) and AX5000
7x2x0.14+2x0.5mm², length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4020-0100
|
Encoder cable for AX5000, both ends prepared for connection
between CFM71/DFS56-Motoren (SEW-Typ.-Nr. 1989308) and AX5000
7x2x0.14+2x0.5mm², length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4020-0110
|
Encoder cable for AX5000, both ends prepared for connection
between CFM71/DFS56-Motoren (SEW-Typ.-Nr. 1989308) and AX5000
7x2x0.14+2x0.5mm², length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4020-0160
|
Encoder cable for AX5000, both ends prepared for connection
between CFM71/DFS56-Motoren (SEW-Typ.-Nr. 1989308) and AX5000
7x2x0.14+2x0.5mm², length l=16m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0050
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=5m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0080
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=8m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0100
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=10m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0150
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=15m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0160
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=16m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0180
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=18m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0200
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=20m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0230
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=23m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0250
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=25m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0280
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=28m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0300
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=30m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0330
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=33m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0350
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=35m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0380
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=38m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0400
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=40m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0430
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=43m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0450
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=45m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0500
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=50m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4120-0600
|
Encoder cable Hiperface for AX5000, both ends prepared for connection
between CMP50 - CMP71-4500 with connector and AX5000
7x2x0.14+2x0.5mm², length l=60m, UL/CSA approved
suitable for high flex use (e.g. drag chain):
max. 10 million cycles, max. 240 m/min, max. acceleration 30 m/s²
bending radius min. 55 mm
|
Beckhoff Vietnam
|
ZK4510-4500-0100
|
Encoder cable for AX5000,
both ends prepared for connection
between Rexroth MSK (Hiperface)
with power connector size 1/1,5 und 2
and AX5000
7x2x0.14+2x0.5mm², length l=10m, UL/CSA approved
suitable for non-flexible laying and limited flexible use:
max. 50.000 cycles, max. 180 m/min, max. acceleration 5 m/s²
bending radius min. 150 mm
|
Beckhoff Vietnam
|
Mr. Minh Thảo
