cam-bien-do-dich-chuyen-tuyen-tinh-cam-ung-wlu-200-v-messotron.png

Cảm biến đo dịch chuyển tuyến tính cảm ứng WLU 200 V Messotron 

Cảm biến đo dịch chuyển tuyến tính cảm ứng WLU 200 V Messotron cảm biến đo dịch chuyển tuyến tính cảm ứng thuộc WLU Series của Messotron Đức, sử dụng nguyên lý LVIT

 

Thông tin Cảm biến đo dịch chuyển tuyến tính cảm ứng WLU 200 V Messotron     

  • MT03731 – WLU 200 V – Cảm biến đo dịch chuyển tuyến tính cảm ứng (Inductive Linear Displacement Transducer – LVIT)

    Hãng sản xuất: Messotron GmbH
    Loại thiết bị: Cảm biến đo dịch chuyển tuyến tính cảm ứng (Inductive Linear Variable Inductive Transducer – LVIT)

Thông số Cảm biến đo dịch chuyển tuyến tính cảm ứng WLU 200 V Messotron

 

Trong các hệ thống tự động hóa, cảm biến hành trình đóng vai trò quan trọng trong việc điều khiển chính xác chuyển động của máy móc. Nếu tín hiệu phản hồi không ổn định có thể gây ra:

  • Sai số vị trí.
  • Giảm độ chính xác gia công.
  • Mất đồng bộ giữa các trục chuyển động.
  • Tăng tỷ lệ sản phẩm lỗi.
  • Giảm tuổi thọ của hệ thống truyền động.

WLU 200 V được Messotron phát triển nhằm khắc phục các vấn đề trên bằng cách:

  • Đo hành trình với độ chính xác cao.
  • Độ tuyến tính ổn định trên toàn dải đo.
  • Khả năng chống nhiễu điện từ tốt.
  • Tuổi thọ cao nhờ nguyên lý đo cảm ứng không tiếp xúc.
  • Dễ dàng tích hợp vào các hệ thống điều khiển tự động.

Thông số kỹ thuật chính

 

Thuộc tính Thông số
Loại thiết bị Cảm biến đo dịch chuyển tuyến tính cảm ứng (LVIT)
Model WLU 200 V
Art.-No MT03731
Hãng Messotron GmbH
Dải đo điện ±100 mm
Hành trình toàn phần 200 mm
Nguyên lý đo Linear Variable Inductive Transducer (LVIT)
Độ tuyến tính < ±1% toàn hành trình
Độ tuyến tính (110% FS) < ±1,5%
Tần số kích thích 3 kHz
Độ nhạy 0,0034 V/mm
Kiểu kết nối Axial Connector
Cáp PTFE, dài 2 m
Phụ kiện Mating Plug
Tài liệu đi kèm Test Protocol bằng tiếng Anh

Ứng dụng thiết bị Messotron Việt Nam 

  • Máy ép thủy lực
  • Máy cán thép
  • Máy dập
  • Máy CNC
  • Xi lanh thủy lực
  • Hệ thống servo
  • Thiết bị đo hành trình
  • Thiết bị thử nghiệm
  • Tự động hóa công nghiệp
  • Thiết bị OEM
  • Phòng nghiên cứu và phát triển (R&D)

Xem thêm sản phẩm ANS Hanoi cung cấp

Các model trong WLU Series

Model Hành trình đo
WLU 50 V ±25 mm
WLU 100 V ±50 mm
WLU 200 V ±100 mm
WLU 300 V ±150 mm
WLU 500 V ±250 mm

 

.1 100%  USA Origin Hubbell Heaters
Vietnam
Code : E06-3SSS Hubbell 6 Gallon Booster Heating Machine
6 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a stainless 316 steel storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam nsulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is eady for electrical and plumbing service connections.
1.2 100%  USA Origin Hubbell Heaters
Vietnam
Code : E10-3SSS Hubbell 10 Gallon Booster Heating Machine
10 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a stainless 316 steel storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam insulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is ready for electrical and plumbing service connections.
2.1 100%  USA Origin Hubbell Heaters
Vietnam
Code : E10A-3SSS Hubbell 10 Gallon Booster Heating Machine
10 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a 316L stainless steel ASME Stamped storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam insulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is ready for electrical and plumbing service connections.
2.2 100%  USA Origin Hubbell Heaters
Vietnam
Code : E06A-3SSS Hubbell 6 Gallon Booster Heating Machine
6 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a 316L stainless steel ASME Stamped storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam insulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is ready for electrical and plumbing service connections.