Nhiệt kế hồng ngoại nhiệt độ cao Raytek RAYR3IPLUS2ML
Nhà cung cấp: ANS Vietnam
Hãng sản xuất: Raytek
Ứng dụng sản phẩm: Automotive
HotlineRaytek Vietnam,Nhiệt kế hồng ngoại nhiệt độ cao Raytek RAYR3IPLUS2ML
Nhiệt kế hồng ngoại nhiệt độ cao Raytek 3I PLUS - 3I PLUS Series High Temp IR Thermometers
Raytek 3I PLUS Nhiệt kế hồng ngoại Raytek IR thế hệ mới được thiết kế để sử dụng trong các ứng dụng công nghiệp nhiệt độ cao, 400 đến 3000 ° C (752 đến 5432 ° F), chẳng hạn như sắt, thép, luyện kim loại, đúc và chế biến, gốm sứ, chất bán dẫn, hóa chất và hóa dầu lò nung, cũng như xử lý nhiệt và nhà máy điện. Nhiệt kế Raytek 3i Plus có tính năng truyền dữ liệu nhanh chóng và dễ dàng sang PC hoặc điện thoại thông minh, một ứng dụng di động để cộng tác và truyền dữ liệu nhanh chóng, đồng thời có thể được sử dụng như một nhiệt kế trực tuyến tạm thời.
Đặc điểm Raytek 3I PLUS:
-
Dải nhiệt độ từ 400 đến 3000ºC (752 đến 5432ºF)
-
Nhiệt độ môi trường xung quanh: 0 đến 50ºC (32 đến 120ºF)
-
Tùy chọn ngắm laser và ngắm phạm vi kép để nhắm mục tiêu đo nhanh chóng và đơn giản
-
Độ phân giải quang học cao: 250: 1, đảm bảo đọc nhiệt độ chính xác ở khoảng cách xa hơn
-
Công nghệ nhìn Red Dot để nhắm mục tiêu chính xác dựa trên vật thể còn nóng
-
Máy dò và cảnh báo chịu nhiệt "Red Nose "
-
Lưu trữ dữ liệu: lên đến 4.900 đơn vị với vị trí, ngày tháng và thời gian
-
Công nghệ không dây Bluetooth® để giao tiếp với thiết bị di động
-
Lập hồ sơ phần mềm máy tính cá nhân (PC)
Mã đặt hàng nhiệt kế hồng ngoại Raytek 3I PLUS
-
Raytek RAYR3IPLUS2ML
-
Raytek RAYR3IPLUS2MSCL
-
Raytek RAYR3IPLUS1MSCL
-
Raytek RAYR3IPLUS1ML
Phụ kiện 3I PLUS:
-
Pin Lithium-Ion Raytek XXXR3IPLUSACCU
-
Túi đựng Raytek XXXR3IPLUSCC
-
Bộ chuyển đổi cổng USB và phích cắm nguồn Raytek XXXR3IPLUSPS
-
Bộ chuyển đổi giắc cắm USB sang DC Raytek XXXR3IPLUSPSCON
-
Dây treo Raytek XXXR3IPLUSSTRAP
USB Raytek XXXR3IPLUSUSBCB
Raytek® Compact CM |
||
|
|
|
VOLTAGE OUTPUT (Linear, scaleable from 0-5V) |
RAYCMLTV |
|
-20 to 500°C (-4 - 932°F) range, 1 m (3.3 ft.) cable, 0.75 - 16UNF 2A threaded SS housing |
RAYCMLTVM |
|
-20 to 500°C (-4 - 932°F) range, 1 m (3.3 ft.) cable, 18Mx1 metric threaded SS housing |
RAYCMLTV3 |
|
-20 to 500°C (-4 - 932°F) range, 3 m (10 ft.) cable, 0.75 - 16UNF 2A threaded SS housing |
RAYCMLTV3M |
|
-20 to 500°C (-4 - 932°F) range, 3 m (10 ft.) cable, 18Mx1 metric threaded SS housing |
|
|
|
TYPE J THERMOCOUPLE OUTPUT |
RAYCMLTJ |
|
-20 to 500°C (-4 - 932°F) range, 1 m (3.3 ft.) cable, 0.75 - 16UNF 2A threaded SS housing |
RAYCMLTJM |
|
-20 to 500°C (-4 - 932°F) range, 1 m (3.3 ft.) cable, 18Mx1 metric threaded SS housing |
RAYCMLTJ3 |
|
-20 to 500°C (-4 - 932°F) range, 3 m (10 ft.) cable, 0.75 - 16UNF 2A threaded SS housing |
RAYCMLTJ3M |
|
-20 to 500°C (-4 - 932°F) range, 3 m (10 ft.) cable, 18Mx1 metric threaded SS housing |
|
|
|
TYPE K THERMOCOUPLE OUTPUT |
RAYCMLTK |
|
-20 to 500°C (-4 - 932°F) range, 1 m (3.3 ft.) cable, 0.75 - 16UNF 2A threaded SS housing |
RAYCMLTKM |
|
-20 to 500°C (-4 - 932°F) range, 1 m (3.3 ft.) cable, 18Mx1 metric threaded SS housing |
RAYCMLTK3 |
|
-20 to 500°C (-4 - 932°F) range, 3 m (10 ft.) cable, 0.75 - 16UNF 2A threaded SS housing |
RAYCMLTK3M |
|
-20 to 500°C (-4 - 932°F) range, 3 m (10 ft.) cable, 18Mx1 metric threaded SS housing |
|
|
|
ACCESSORIES |
XXXCMACMN |
|
Stainless steel mounting nuts (2) |
XXXCMACMNM |
|
Stainless steel mounting nuts (2) metric threads |
XXXCIACFB |
|
Stainless Steel Fixed Bracket |
XXXCIADJB |
|
Stainless Steel Adjustable Bracket |
XXXCMACAP |
|
Stainless Steel Air Purge Collar |
XXXCMACAPM |
|
Metric Air Purge Collar for metric threaded housing |
XXXCMACRA |
|
Right Angle Mirror |
XXXCMACRAM |
|
Right Angle Mirror, metric thread |
XXXCIDCPS |
|
DIN mount 24VDC, 125mA switching power supply (110/220V input) |
XXXCI1CON |
|
Thermocouple cable extension connector kit for CMJ models |
XXXCI2CON |
|
Thermocouple cable extension connector kit for CMK model |
RAYGPC |
|
Panel mount meter and power supply 110/220VAC for CM sensors |
XXXCMACPW |
|
Protective Silicon window for CM sensors |
XXXCMACPWM |
|
Protective Silicon window for Metric CM sensors |
XXXCMCOMM |
|
Communications kit for CM sensors |
LOW TEMP EXTENSION CABLES (maximum ambient 105°C, 220°F) |
||
XXXCI1CB50 |
|
Extension cable for CI1; 15 meter (50 feet) Requires XXXCI1CON when ordering |
XXXCI1CB100 |
|
Extension cable for CI1; 30 meter (100 feet) Requires XXXCI1CON when ordering |
XXXCI2CB50 |
|
Extension cable for CI2; 15 meter (50 feet) Requires XXXCI2CON when ordering |
XXXCI2CB100 |
|
Extension cable for CI2; 30 meter (100 feet) Requires XXXCI2CON when ordering |
XXXCI3CB50 |
|
Extension cable for CI3; 15 meter (50 feet) |
XXXCI3CB100 |
|
Extension cable for CI3; 30 meter (100 feet) |
HIGH TEMP EXTENSION CABLES (maximum ambient 260° C, 500° F) |
||
XXXCIACCB50H |
|
High temperature cable; 15 meter (50 feet) (260° C; 500° F) |
XXXCIACCB100H |
|
High temperature cable; 30 meter (100 feet) (260° C; 500° F) |
|
|
|
|
CI Series Compact IR Sensors |
||
RAYCI |
|
Raytek Compact CI Infrared Pyrometer Series |
RAYCI1B |
|
Raytek RAYCI1B Infrared Temperature Sensor, Type J Output, 100 to 500°C (212 to 932°F) |
RAYCI1A |
|
Raytek RAYCI1A Infrared Temperature Sensor, Type J Output, 0 to 115°C (32 to 240°F) |
RAYCI1A10L |
|
Raytek RAYCI1A10L Infrared Temperature Sensor with 1 m Cable, Type J Output, 32 to 662°F (0 to 350°C) |
|
|
|
Raytek RAYCI3A Infrared Temperature Sensor, 0-5VDC Output, 0 to 115°C (32 to 240°F) |
|
|
|
Raytek RAYCI3A50L Infrared Temperature Sensor with 15m Cable, 0-5VDC Output, 0 to 115°C (32 to 240°F) |
|
|
|
Raytek RAYCI3B Infrared Temperature Sensor, 0-5VDC Output, 100 to 500°C (212 to 932°F) |
|
|
|
Raytek RAYCI2A Infrared Temperature Sensor, Type K Output, 0 to 115°C (32 to 240°F) |
|
|
|
Raytek RAYCI2B Infrared Temperature Sensor, Type K Output, 100 to 500°C (212 to 932°F) |
|
|
|
Raytek RAYCI2B10L Infrared Temperature Sensor with 3m Cable, Type K Output, 100 to 500°C (212 to 932°F) |
|
|
|
Raytek RAYCI2B50L Infrared Temperature Sensor with 15m Cable, Type K Output, 100 to 500°C (212 to 932°F) |
|
|
|
Raytek RAYCI3A10L Infrared Temperature Sensor with 3m Cable, 0-5VDC Output, 0 to 115°C (32 to 240°F) |
ACCESSORIES FOR CI SERIES |
||
XXXCIACWC |
|
CI Water-cooled Housing Only (For units with high temperature cable) |
XXXCIACMN |
|
Mounting nuts (2) |
XXXCIACMNM |
|
Metric Mounting nuts (2) |
XXXCIACFB |
|
Fixed bracket |
XXXCIADJB |
|
Adjustable bracket |
XXXCIAP |
|
Air Purge Collar (aluminum) |
XXXCIACAP |
|
Air Purge Collar (stainless) |
XXXCIACAPM |
|
Metric Air Purge Collar for metric threaded housing |
XXXCIACRA |
|
Right angle mirror (Not For Use With Water Cooled Option, (product not available in metric) |
XXXCIDCPS |
|
DIN mount 24VDC, 125mA switching power supply (110/220V input) |
XXXCI1CON |
|
Thermocouple cable extension connector kit for CI1 model |
XXXCI2CON |
|
Thermocouple cable extension connector kit for CI2 model |
RAYGPC |
|
Panel mount meter and power supply 110/220VAC for CI |
CI LOW TEMP EXTENSION CABLES (maximum ambient 105°C, 220°F) |
||
XXXCI1CB50 |
|
Extension cable for CI1; 15 meter (50 feet) |
XXXCI1CB100 |
|
Extension cable for CI1; 30 meter (100 feet) |
XXXCI1CON |
|
XXXCI1CON,T/C EXTENSION CONN. KIT FOR CI1 MODEL |
XXXCI2CB50 |
|
Extension cable for CI2; 15 meter (50 feet) |
XXXCI2CB100 |
|
Extension cable for CI2; 30 meter (100 feet) |
XXXCI2CON |
|
XXXCI2CON,T/C EXTENSION CONN. KIT FOR CI2 MODEL |
XXXCI3CB50 |
|
Extension cable for CI3; 15 meter (50 feet) |
XXXCI3CB100 |
|
Extension cable for CI3; 30 meter (100 feet) |
CI HIGH TEMP EXTENSION CABLE FOR USE WITH ALL CI1, CI2, & CI3 UNITS (maximum ambient 260˚C, 500˚F) |
||
XXXCIACCB50H |
|
High temperature cable; 15 meter (50 feet) (260° C; 500° F) |
XXXCIACCB100H |
|
High temperature cable; 30 meter (100 feet) (260° C; 500° F) |
MI3 Series Miniature Infrared Sensors |
||
STANDARD MI3 SERIES LOW TEMPERATURE SENSING HEADS |
||
RAYMI310LTS |
|
-40 to 600°C (-40 to 1112°F), 8 - 14 µm, 10:1, 130 msec, 1m cable |
RAYMI320LTS |
|
0 to 1000°C (32 to 1832°F), 8 - 14 µm, 22:1, 130 msec, 1m cable |
RAYMI302LTS |
|
-40 to 600°C (-40 to 1112°F), 8 - 14 µm, 2:1, 130 msec, 1m cable |
FAST RESPONSE MI3 SERIES LOW TEMPERATURE SENSING HEADS |
||
RAYMI310LTF |
|
0 - 1000°C (32 - 1832°F), 8 - 14 µm, 10:1, 20 msec, 1m cable |
5 MICRON SENSING HEADS FOR GLASS APPLICATIONS |
||
RAYMI310G5S |
|
250 to 1650°C, 5 µm, D:S 10:1, 130 msec, 1m cable |
HIGH AMBIENT MI3 SERIES SENSING HEADS LOW TEMPERATURE SENSING HEADS |
||
RAYMI310LTH |
|
-40 to 600°C, 8 to 14 µm, D:S 10:1, 130 msec, 1m cable |
RAYMI320LTH |
|
0 to 1000°C, 8 to 14 µm, D:S 22:1, 130 msec, 1m cable |
|
|
|
Raytek RAYMI310LTSCB8 Infrared Temperature Sensor with 8m Cable, 10:1 Optics, -40 to 600°C (-40 to 1112°F) |
|
|
|
Raytek RAYMI310LTSCB15 Infrared Temperature Sensor with 15m Cable, 10:1 Optics, -40 to 600°C (-40 to 1112°F) |
|
|
|
Raytek RAYMI310LTSCB3 Infrared Temperature Sensor with 3m Cable, 10:1 Optics, -40 to 600°C (-40 to 1112°F) |
|
|
|
Raytek RAYMI302LTSCB30 Infrared Temperature Sensor with 30m Cable, 2:1 Optics, -40 to 600°C (-40 to 1112°F) |
XXXMI3CERT |
|
Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) |
SYSTEM EXPANSION ACCESSORIES |
||
XXXMI3CONNBOX |
|
Multi-channel sensor interface box for MI3 and MI3M series communications modules. Includes 8 sets of field wiring terminals wired in parallel to one 5 meter (16.4') cable to connect to MI3 or MI3M communications module. |
XXXUSB485 |
|
USB to RS232/422/485 converter |
RAYMI3COMMI |
|
Installation of MI3 sensing head with MI3/MI3M communications box |
|
|
|
MECHANICAL ACCESSORIES |
XXXMIACMN |
|
Sensing head mounting nuts - 5 pieces |
XXXMIACFB |
|
Sensing head fixed mounting bracket |
XXXMIACAB |
|
Sensing head adjustable mounting bracket |
XXXMIACAJ |
|
Air purge jacket (no cooling) - For use in ambient temperatures <200°C (<392°F). |
XXXMIACAJI |
|
Air purge jacket (no cooling) - installed, for MI3xxLTH only possible option - For use in ambient temperatures <200°C (<392°F). |
XXXMIACCJ |
|
Air cooling and purging system with .8m (2.8') insulated air hose. For use in ambient temperatures <200°C (<392°F). Not compatible with MI3LTH. |
XXXMIACCJ1 |
|
Air cooling and purging system with 2.8m (9.2') insulated air hose. For use in ambient temperatures <200°C (<392°F). Not compatible with MI3LTH. |
XXXMIACRAJ1 |
|
Right angle mirror with air purging systems. For use in ambient temperatures <200°C (<392°F). Not compatible with MI3LTH. |
XXXMIACRAJ |
|
Right angle mirror for use with air cooling and purging systems. For use in ambient temperatures <200°C (<392°F). Not compatible with MI3LTH. |
XXXMIACPW |
|
Zinc Sulfide protective window for MI sensors. Not for use with air purging or air cooling systems. |
XXXMI3ACPWP |
|
Polymer protective window for MI3 sensors. Not for use with air purging or air cooling systems. |
XXXMI3ACCFL |
|
MI3 Close Focus Lens Accessory, 10mm focus distance. LT models only. |
D82MIACAJ |
|
Stainless steel air purge jacket (no cooling) - For use in ambient temperatures <200°C (<392°F) |
XXXUSBCABLE |
|
USB cable assembly, 4 COND, USB-A(M), USB-MINI-B(M), Shielded, 2M |
MI3 1M, 2M Series |
||
STANDARD MI3 HIGH TEMPERATURE SENSING HEADS: 1M AND 2M SENSING HEADS ARE RATED FOR A MAXIMUM AMBIENT TEMPERATURE OF 120°C (<250°F) |
||
RAYMI31001MSF1 |
|
500 to 1,800°C (932 to 3,272°F), 1 µm, 100:1 D:S, 200mm Focus, 10 msec, 1m cable |
RAYMI31001MSF3 |
|
500 to 1,800°C (932 to 3,272°F), 1 µm, 100:1 D:S, 2,200mm Focus, 10 msec, 1m cable |
RAYMI31002MSF1 |
|
250 to 1,400°C (482 to 2,552°F), 1.6 µm, 100:1 D:S, 200mm Focus, 10 msec, 1m cable |
RAYMI31002MSF3 |
|
250 to 1,400°C (482 to 2,552°F), 1.6 µm, 100:1 D:S, 2,200mm Focus, 10 msec, 1m cable |
|
|
|
1M and 2M sensing heads are rated for a maximum ambient temperature of 120°C (<250°F) |
|
|
|
SYSTEM EXPANSION ACCESSORIES |
XXXMI3CONNBOX |
|
Multi-channel sensor interface box for MI3 and MI3M series communications modules. Includes 8 sets of field wiring terminals wired in parallel to one 5 meter (16.4') cable to connect to MI3 or MI3M communications module. |
XXXUSBCABLE |
|
USB cable assembly, 4 COND, USB-A(M), USB-MINI-B(M), Shielded, 2M |
XXXUSB485 |
|
USB to RS232/422/485 converter |
XXXSYSPS |
|
24VDC power supply (100/240),1.3 amps |
|
|
|
MECHANICAL ACCESSORIES |
XXXMI3100MN |
|
Stainless steel mounting nuts (2) -metric threads |
XXXMI3100FB |
|
Stainless Steel Fixed Bracket |
XXXMI3100ADJB |
|
Stainless Steel Adjustable Bracket |
XXXMI3100AP |
|
Metric Air Purge Collar |
XXXMI3100RAM |
|
Right Angle Mirror, metric thread |
MI3 SERIES COMMUNICATIONS BOXES |
||
RAYMI3COMM |
|
MI3 series IR thermometer I/O box with USB 2.0 communications. Select the type of standard sensing heads listed above. |
RAYMI3COMMI |
|
MI3 series IR thermometer I/O box with USB 2.0 communications and sensing head installed. Select the type of standard sensing heads listed above and order as a separate line item. |
RAYMI3COMM4 |
|
MI3 series IR thermometer I/O box with USB 2.0 and RS485communications. Select the type of standard sensing heads listed above. For use over long distance or multi-drop networks and requires use of Smart RS485 converter. |
RAYMI3COMMM |
|
MI3 series IR thermometer I/O box with USB 2.0 and Modbus network communications interface. Select the type of standard sensing heads listed above. |
RAYMI3COMME |
|
MI3 series IR thermometer I/O box with USB 2.0 and Ethernet network communications interface with installed M12 fieldbus connector and built-in HTTP-Server server . Select the type of standard sensing heads listed above. |
RAYMI3COMMP2 |
|
MI3 series IR thermometer I/O box with USB 2.0 and Profibus network communications interface with installed 9 pin D-sub fieldbus connector. Select the type of standard sensing heads listed above. |
RAYMI3COMMP1 |
|
MI3 series IR thermometer I/O box with USB 2.0 and Profibus network communications interface with installed M12 fieldbus connector. Select the type of standard sensing heads listed above. |
RAYMI3COMMPN |
|
MI3 series IR thermometer I/O box with USB 2.0 and Profinet network communications interface with installed M12 fieldbus connector. Select the type of standard sensing heads listed above. |
MI3M SERIES MULTICHANNEL DIN MOUNT COMMUNICATIONS BOXES |
||
RAYMI3MCOMMN |
|
Modular 3TE DIN mountable 4-channel IR thermometer system with USB 2.0 communications (no user interface or display). Select the type and quantity (maximum of 4) of standard sensing heads listed above. |
RAYMI3MCOMM |
|
Modular 4TE DIN mountable 4-channel IR thermometer system with USB 2.0 and RS485 communications. Select the type and quantity (maximum of 4) of standard sensing heads listed above. |
RAYMI3MCOMMA |
|
Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and 4 galvanic isolated analog outputs. Select the type and quantity (maximum of 4) of standard sensing heads listed above. |
RAYMI3MCOMMM |
|
Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Modbus network communications. Select the type and quantity (maximum of 4) of standard sensing heads listed above. |
RAYMI3MCOMME |
|
Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Ethernet interface with built-in HTTP-Server. Select the type and quantity (maximum of 4) of standard sensing heads listed above. |
RAYMI3MCOMMP |
|
Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Profibus network communications. Select the type and quantity (maximum of 4) of standard sensing heads listed above. |
RAYMI3MCOMMPN |
|
Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Profinet interface. Select the type and quantity (maximum of 4) of standard sensing heads listed above. |
XXXETHLTCB |
|
7.5m Ethernet Cable (CAT5, 70°C) with M12 plug to connect RAYMI3COMME |
GPS Series Sensing Heads |
||
|
|
|
Raytek RAYGPSSFL Standard Focus Infrared Temperature Sensor with Laser Sighting, 50:1 Optics |
|
|
|
Raytek RAYGPSCFL Infrared Temperature Sensor, Close Focus, 35:1 |
XXXGPSCERT |
|
Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST, certified w/ GPC display monitor (must be ordered as a separate line item) |
|
|
ACCESSORIES |
|
XXXGPSCB4 |
|
Spare GPS Sensor Cable - 4 meter length |
XXXTXXACAP |
|
Air purge collar |
XXXTXXACCA |
|
Conduit adapter |
XXXTXXACPA |
|
Pipe thread adaptor (Sighting Tubes listed below can be attached to this) |
XXXTXXACMN |
|
Mounting nut (spare) |
XXXTXXACFB |
|
Fixed bracket (spare) |
XXXTXXACAB |
|
Adjustable bracket (spare) |
XXXTXXACSB |
|
Swivel bracket |
XXXTXXACSV |
|
Sighting viewer setup tool (for GPR & TX ) |
XXXTXXACRA |
|
Right angle mirror (for targets at right angles to sensor axis) |
XXXTSTC12 |
|
30 cm (12") sighting tube, ceramic (up to 1500°C) |
XXXTST12 |
|
30 cm (12") sighting tube, stainless steel (up to 800°C) |
XXXTXXACAFA |
|
Adjustable Furnace Wall Mounting Assembly |
XXXTXXACFA |
|
Wall Mount Flange Assembly |
98982-1 |
|
Replacment Laser Switch Box For GPS Sensor |
FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES |
||
XXXTXXWR |
|
Water flow regulator (water cooling) |
XXXTXXAR |
|
Air purging flow regulator assembly with air filter |
XXXTXXCAFR |
|
Cooling air flow regulator (high capacity) |
GPC Series Monitor |
||
RAYGPC |
|
GPC panel-mount meter with standard 5 VDC alarm outputs |
RAYGPCM |
|
GPC panel-mount meter with 3 A mechanical alarm outputs |
|
|
|
GPC MONITOR ACCESSORIES |
XXXGPSSRAC |
|
10 A/ 24 - 330 VAC Solid State Relay for use with 5Vdc alarm outputs from GPC monitor only |
XXXGPACFB |
|
GPC mounting bracket for sub-panel mounting of monitor |
Raytek Marathon MM |
||
RAYMM-LTS-CF1/SF1/SF2/SF3/VF1 |
|
Low Temp: -40 to 800°C (-40 to 1472°F), 8 to 14 microns spectral response, 70:1 optical resolution |
RAYMM-MTS-CF1/SF1/SF2/SF3/VF1 |
|
Medium Temp: 250 to 1100°C (482 to 2012°F), 3.9 micron spectral response, 70:1 optical resolution |
RAYMM-G5L-CF1/SF1/SF2/SF3/VF1 |
|
Glass Surface: 250 to 1650°C (482 to 3002°F), 5.0 micron spectral response, 70:1 optical resolution |
RAYMM-G5H-CF1/SF1/SF2/SF3/VF1 |
|
Glass Surface: 450 to 2250°C (842 to 4082°F), 5.0 micron spectral response, 70:1 optical resolution |
RAYMM-G7S-CF1/SF1/SF2/SF3/VF1 |
|
Glass Surface: 300 to 900°C (572 to 1552°F), 7.9 micron spectral response, 100:1 optical resolution |
MM CABLE |
||
XXX2CCB4 |
|
High-temp (200°C) 12 wire 12 pin conductor cable with connector, 4m (13 ft.) |
XXX2CCB8 |
|
High-temp (200°C) 12 wire 12 pin conductor cable with connector, 8m (26 ft.) |
XXX2CCB15 |
|
High-temp (200°C) 12 wire 12 pin conductor cable with connector, 15m (50 ft.) |
XXX2CCB30 |
|
High-temp (200°C) 12 wire 12 pin conductor cable with connector, 30m (100 ft.) |
XXX2CCB60 |
|
High-temp (200°C) 12 wire 12 pin conductor cable with connector, 60m (200 ft.) |
XXX2CLTCB4 |
|
Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 4m (13ft.) |
XXX2CLTCB8 |
|
Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 8m (26ft.) |
XXX2CLTCB15 |
|
Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 15m (50 ft.) |
XXX2CLTCB30 |
|
Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 30m (100 ft.) |
XXX2CLTCB60 |
|
Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 60m (200ft.) |
|
|
|
An external terminal block is included with each cable. |
THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. |
|||
RAYTXXTJ3 |
|
ThermoJacket housing for TX sensors |
|
THERMOJACKET ACCESSORIES |
|||
XXXTXXMF |
|
Mounting Flange for ThermoJacket |
|
XXXTXXMB |
|
Adjustable mounting base for ThermoJacket |
|
XXXTXXGTQ |
|
Blast Gate Assembly with Quartz Window (HT model) |
|
XXXTXXGTA |
|
Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) |
|
XXXTXXAPA |
|
Adjustable Pipe Adapter assembly |
|
XXXTXXMST |
|
Mounting flange for use with sighting tubes |
|
XXXTSTC12 |
|
30 cm (12") sighting tube, ceramic (up to 1500°C) |
|
XXXTST12 |
|
30 cm (12") sighting tube, stainless steel (up to 800°C) |
|
BEESIGHTT |
|
30 cm (12") sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base |
|
FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES |
|||
XXXTXXWR |
|
Water flow regulator (water cooling) |
|
XXXTXXAR |
|
Air purging flow regulator assembly with air filter |
|
XXXTXXCAFR |
|
Cooling air flow regulator (high capacity) |
|
THERMOJACKET & ACCESSORIES |
|||
THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. |
|||
RAYTXXTJ3 |
|
ThermoJacket housing for TX sensors |
|
RAYTXXTJ4 |
|
ThermoJacket housing for Marathon MM Sensors |
|
RAYTXXTJ5 |
|
ThermoJacket housing for XR sensors |
|
THERMOJACKET ACCESSORIES |
|||
XXXTXXMF |
|
Mounting Flange for ThermoJacket |
|
XXXTXXMB |
|
Adjustable mounting base for ThermoJacket |
|
XXXTXXGTQ |
|
Blast Gate Assembly with Quartz Window (HT model) |
|
XXXTXXGTA |
|
Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) |
|
XXXTXXAPA |
|
Adjustable Pipe Adapter assembly |
|
XXXTXXMST |
|
Mounting flange for use with sighting tubes |
|
XXXTSTC12 |
|
30 cm (12") sighting tube, ceramic (up to 1500°C) |
|
XXXTST12 |
|
30 cm (12") sighting tube, stainless steel (up to 800°C) |
|
BEESIGHTT |
|
30 cm (12") sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base |
|
XXX2CFT |
|
Focus Adjustment Tool, for use when MR1S sensors are installed in a Thermojacket. |
|
BF2TJEXTENDER |
|
ThermoJacket Extension flange for CCD camera accessories mounted on MR Sensor in ThermoJacket |
|
BD3TJBACK |
|
ThermoJacket Rear cover with Peep-sight used for sighting Marathon models without removal |
|
XXXGTQHTW |
|
Replacement Quartz Window for Blast Gate Assembly |
|
JNTHDKIT |
|
Conversion Kit to install TX into existing Thermo-Jacket |
|
JNTORINGKIT |
|
5 complete O-ring sets for service of ThermoJackets |
|
FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES |
|||
XXXTXXWR |
|
Water flow regulator (water cooling) |
|
XXXTXXAR |
|
Air purging flow regulator assembly with air filter |
|
XXXTXXCAFR |
|
Cooling air flow regulator (high capacity) |
|
Raynger® 3i Plus |
|||
RAYR3IPLUS1ML |
|
1 micron w/ Dual laser (EN60825 Class 2, FDA Class II)
|
|
RAYR3IPLUS1MSCL |
|
1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope
|
|
RAYR3IPLUS2ML |
|
1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II)
|
|
RAYR3IPLUS2MSCL |
|
1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) + Scope,
|
|
RAYR3IPLUSNBT1ML |
|
1 micron w/ Dual laser (EN60825 Class 2, FDA Class II)
|
|
RAYR3IPLUSNBT1MSCL |
|
1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope
|
|
RAYR3IPLUSNBT2ML |
|
1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II)
|
|
RAYR3IPLUSNBT2MSCL |
|
1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) + Scope,
|
|
3IPLUS Accessories |
|||
XXXR3IPLUSCC |
|
Carrying case |
|
XXXR3IPLUSSTRAP |
|
Neck strap |
|
XXXR3IPLUSACCU |
|
|
|
Spare Lithium-ion rechargeable battery, 2.5 Ah |
XXXR3IPLUSPS
Mini USB port adaptor with multi-country power plug
(100 – 240 VAC, 50/60 Hz), including SAA, EU, UK, US and CCC
XXXR3IPLUSPSCON
Mini USB-to-DC jack converter for charging battery separately
XXXR3IPLUSUSBCB
Computer cable with USB-to-Mini USB, 1.5 m (4.9 ft)
Raytek® MP150 Linescanner
RAYTMP150-LT
20 to 350°C (68 to 662°F), 3 to 5 µm
RAYTMP150-MT
100 to 800°C (212 to 1472°F), 3.9 microns
RAYTMP150-G5
100 to 950°C (212 to 1742°F), 5 microns
RAYTMP150-P30
30 to 250°C (86 to 482°F), 3.43 microns
RAYTMP150-P31
100 to 350°C (212 to 662°F), 3.43 microns
RAYTMP150-1M
600 to 1200°C (1112 to 2192°F), 1 micron
RAYTMP150-2M
400 to 950°C (752 to 1742°F), 1.6 micron
RAYTMP150-HR
100 to 650°C (212 to 1202°F), 3.5 to 4 micron
HR scanners are purpose built for cement scanning applications and include an internal heater and special focus distance as standard equipment. They are not equipped with a High Pressure Air Purge (HPAP). As such the only available part number is RAYTMP150HRR1.
Comunication Option R
RJ-45: Scanner data link is configured to plug into any standard RJ45 Ethernet network socket
Data Point Option (0)
Standard configuration: 512 data points per scan line (up to 80Hz), 256 data points (80 to 150Hz)
Data Point Option (1)
Enhanced configuration: 1024 data points per scan line (up to 40Hz), 512 data points per scan line (40 to 80Hz), 256 data points (80 to 150Hz)
XXXTMP150CERT
Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
MP150 INFRARED LINESCANNER ACCESSORIES
XXXHSFIC1
High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC4
High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX
BOX FOR FIBER OPTIC/RJ45 CONVERTER + PS
SVCOSSAPKG
On-site Start-up and Commissioning Service (North America Only)
XXXTMP50ACMP
Mounting Plate for setting on a Tripod
XXXTMP50ACRMB
Adjustable Rugged Mounting Base, includes scanner mounting plate
XXXTXXWR
Water Flow Regulator
XXXTMP50THERM
Thermostatic Control System
XXXTXXCAFR
Air Flow Regulator, high capacity, for purging window
XXXTMP50ACFG
Laser Enhancing Filter Eyeglasses for laser sighting
XXXTMP50SPSCB
Spare MP50 power cable, 180°C max. 7.5 meters (25 ft.) long
XXXTMP50SPSCB10
Spare MP50 power cable, 180°C max. 10 meters (33 ft.) long
XXXTMP150SPETHCB
Spare MP150 Ethernet cable, 180°C max. 7.5 meters (25 ft.) long
XXXTMP150SPETHCB10
Spare MP150 Ethernet cable, 180°C max. 10 meters (33 ft.) long
XXXTMP50S485CB
Spare MP50 RS485 Cable with RS232 converter,180°C max. 7.5 meters (25 ft.) long
XXXTMP50S485CB10
Spare MP50 RS485 Cable with RS232 converter,180°C max. 10 meters (33 ft.) long.
XXXTMP50S4PCN
Spare MP50 4-pin connector
XXXTMP50S6PCN
Spare MP50 6-pin connector
XXXTMP50AC485CV
Spare RS485 converter for MP50 (no cable)
XXXSYS485CV
RS232/RS485 Converter (required for Output Modules).
XXXSYSPS
24VDC power supply (100/240),1.3 amps
XXXUSB485
USB to RS232/422/485 converter
XXXTMP150ACSWK1M
SPARE WINDOW FOR MP1501M
XXXTMP150ACSWK2M
SPARE WINDOW FOR MP1502M
XXXTMP150ACSWKG5
SPARE WINDOW FOR MP150G5
XXXTMP150ACSWKHR
SPARE WINDOW FOR MP150HR
XXXTMP150ACSWKLT
SPARE WINDOW FOR MP150LT
XXXTMP150ACSWKMT
SPARE WINDOW FOR MP150MT
XXXTMP150ACSWKP3
SPARE WINDOW FOR MP150P3
XXXTMP150FSNPT
NPT Fitting Set
XXXTMP150FSISO
ISO Fitting Set
XXXTMP150ACCC
Carrying case
High Temp Enclosure
XXXSYSENC
Enclosure & Base
Stainless steel enclosure with mounting base and integrated fail-safe shutter, includes grommet plates for wiring and cooling water (if req'd) and mounting aperture for high performance vortex cooler
XXXSYSENCICP
Internal Cold-Plates
Internal cold plates designed to cool scanner directly, Eliminates the need to disconnect plumbing fittings to remove scanner, supplied pre-connected with high temperature hoses - supplied as set of two.
SYSENCVT
High Performance Vortex Cooler
Separates compressed air (or nitrogen) into hot and cold streams to actively cool enclosure interior
XXXSYSENCWCS
Water Cooled Shield
Stainless steel high performance water shield. One inch water inlet and outlet permit high flow rates and extremely high heat removal capability.
XXXSYSENCIS
Insulating Shield
A custom stainless steel envelope filled with high performacne refractory material. Placed closest to the process, it prevents heat form entering the enclosure and lessens the heat removal requirements of other elements.
TF150 Process Imaging System for Thermoforming
RAYTTF150-LT
TF150 System with MP150LT 20 to 350°C (68 to 572°F), 3 to 5 microns
RAYTTF150-MT
TF150 System with MP150MT, 100 to 800°C (212 to 1472°F), 3.9 microns
RAYTTF150-P30
TF150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns
RAYTTF150-31
TF150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns
OPTION FOR TF150
XXXTMP150CERT
Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
XXXTMP50ACRMB
Adjustable Rugged Mounting Base (includes scanner mounting plate)
XXXHSFIC1
High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC2
High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX
Housing, Fiber optic/RJ-45 converter and power supply
SVCOSSAPKG
On-site Start-up and Commissioning Service (North America Only)
GS150/GS150LE Process Imaging System for Glass Processing
RAYTGS150G5R1
specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line.
RAYTGS150G5R0
specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line.
UPGRADES
RAYTGS150LEUPGRADE
The GS150LE system was developed specifically to monitor glass which has been coated on one side with a low-emissivity coating. Includes specialized MI3 sensor and GS150LE software, air-purge jacket, PC connection Kit
OPTIONS
XXXTMP150CERT
Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
XXXTMP50ACRMB
Adjustable Rugged Mounting Base (includes scanner mounting plate)
XXXHSFIC1
High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC2
High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX
Housing, Fiber optic/RJ-45 converter and power supply
SVCOSSAPKG
On-site Start-up and Commissioning Service (North America Only)
ES150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes
RAYTES150-LT
ES150 System with MP150LT 20 to 350°C (68 to 572°F), 3 to 5 microns
RAYTES150-MT
ES150 System with MP150MT, 100 to 800°C (212 to 1472°F), 3.9 microns
RAYTES150-G5
ES150 System with MP150G5, 100 to 950°C (212 to 1742°F), 5 microns
RAYTES150-P30
ES150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns
RAYTES150-P31
ES150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns
RAYTES150-1M
ES150 System with MP1501M, 600 to 1200°C (1112 to 2192°F), 1 micron
RAYTES150-2M
ES150 System with MP1502M, 400 to 950°C (752 to 1742°F), 1.6 micron
OPTIONS
XXXTMP150CERT
Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
XXXTMP50ACRMB
Adjustable Rugged Mounting Base (includes scanner mounting plate)
XXXHSFIC1
High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC2
High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX
Housing, Fiber optic/RJ-45 converter and power supply
SVCOSSAPKG
On-site Start-up and Commissioning Service (North America Only)
EC150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes
RAYTEC150-P30-R
EC150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns
RAYTEC150-P31-R
EC150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns
OPTIONS
XXXTMP150CERT
Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)
XXXTMP50ACRMB
Adjustable Rugged Mounting Base (includes scanner mounting plate)
XXXHSFIC1
High Speed Fiber-Optic/RJ45 Converter (1 Channel)
XXXHSFIC2
High Speed Fiber-Optic/RJ45 Converter (4 Channel)
XXXHSFICBOX
Housing, Fiber optic/RJ-45 converter and power supply
SVCOSSAPKG
On-site Start-up and Commissioning Service (North America Only)
CS210 Infrared Linescanning System for Rotary Kilns
RAYTCS211R1
CS211 Rotating Kiln System (Single Scanner)
Linescanner MP150HR
Protective Housing XXXSYSPHSS, stainless steel
Position Indicator with junction box (XXXSYSSECPI)
System Connection Box (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room
DataTemp CS Software
Documentation
RAYTCS212R1
CS212 Rotating Kiln System (Dual Scanner)
2 Protective Housings XXXSYSPHSS, stainless steel
Position indicator with junction box (XXXSYSSECPI)
2 System Connection Boxes (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room)
DataTemp CS Software
Documentation
RAYTCS213R1
CS213 Rotating Kiln System (Triple Scanner)
3 Linescanners MP150HR
3 Protective Housings XXXSYSPHSS, stainless steel
Position indicator with junction box (XXXSYSSECPI)
3 System Connection Boxes (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room)
DataTemp CS Software
Documentation
RAYTCS214R1
CS214 Rotating Kiln System (Quad Scanner)
4 Linescanners MP150HR
4 Protective Housings XXXSYSPHSS, stainless steel
Position indicator with junction box (XXXSYSSECPI)
4 System Connection Boxes (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room)
DataTemp CS Software
Documentation
RAYCS210EXT
CS21x Extension KIT
Maximum Extension up to a four Scanner System
1 Scanner RAYTMP150HRR1
1 Stainless Steel protective housing incl. Mounting Base XXXSYSPHSS
1 System Connection Box XXXCS210CONBOX
Scanner Cable Set LT
New License file (Serial number from all existing scanners needed with P.O.)
ACCESSORIES
XXXSYSCS210CON
Serial Ethernet Converter
Please note: Always necessary to connect with following components:XXXTCSLRM210, FAN Control Hardware, XXXTCS200BZ and XXXTCS200SM
XXXCS210CONBOX
CS210CONBOX,CS210 SYSTEM CONNECTION BOX
XXXCS210ENCON
Endurance Connection Box
XXXSYS16DA*
RS485 Remote Controller with 16 Digital-Outputs
XXXSYS7RA
7-Channel Relays Output Modul
XXXTCS210BZ
Burning Zone Monitoring: Endurance Connection Box
Endurance Ratio Pyrometer, 600 to 1800°C
15 m High Temperature Cable
ThermoJacket Housing for E-TJ1
Blast Gate Assembly with Quartz Window
30 cm sighting tube, stainless steel
Adjustable Pipe Adapter assembly
Adjustable Mounting Base for Thermojacket
Air Flow/Pressure Regulator Assembly
XXXTCS200SM
Shadow Monitoring: consists of MI Connection Box, MIH Sensor -40 to 600°C, 8 m high temperature cable, Air Purge Jacket, stainless steel, Adjustable Mounting Bracket.
XXXTCSLRM210
Live Ring Migration for CS210 System, complete with LRM Remote Controller & 3 position indicators
XXXSYSLDM
Laser distance meter
XXXPi20FO1
Fiber Optic Cable 150 m
XXXPi20FO2
Fiber Optic Cable 300 m
SVCOSSAPKG
On-site Start-up and Commissioning Service (Item # 2509605/North America only)
XXXSYS4AA
Analog Output Module (4 channels, mA or V)
XXXSYS485CV
RS232/RS485 Converter (required for Output Modules)
CS100/200 UPGRADES to CS210
XXXCS210BUPGRADE
Basic Upgrade to CS Software. This is not a full upgrade to the level of CS210
Not all functions of CS210 Upgrade are supported.
No new wiring of system needed.
XXXCS211BUPGRADE
CS101 to CS211 (1 scanner system)
Basic System Upgrade without new Scanner.
This upgrades requires the use of the MP150 line scanner to utilize all funcitonality.
Will work with MP50 (older generation) but not all features will be available
New wiring of system needed.
XXXCS212BUPGRADE
CS102 to CS212 (2 scanner system)
Basic System Upgrade without new Scanner.
This upgrades requires the use of the MP150 line scanner to utilize all funcitonality.
Will work with MP50 (older generation) but not all features will be available
New wiring of system needed.
RAYCS211FUPGRADE
Full System Upgrade (1 scanner system) with new Scanner MP150.
New wiring of system needed.
Accessories analogous to a new CS211 system.
RAYCS212FUPGRADE
Full System Upgrade (2 scanner system) with new Scanner MP150.
New wiring of system needed.
Accessories analogous to a new CS212 system.
CS210 Infrared Linescanning System for Rotary Kilns Upgrades & Accessories
XXXTCS3D210
3D View Software Upgrade for existing CS210 systems
XXXTCSRFM210
Refractory Management Software (incl. 3D Software) Upgrade for existing CS210 Systems
XXXCS210CONBOX
CS210 System Connection Box
XXXCS210ENCON
Endurance Connection Box
E1RL-F2-L-0-0
Endurance Ratio Pyrometer, 600 to 1800°C
A-CB-HT-M16-W12-15
15 m High Temperature Cable, 200°C
A-TJ-EN
ThermoJacket Housing for Endurance
XXXTXXGTQ
Blast Gate Assembly with Quartz Window (HT models)
XXXTST12
30 cm sighting tube, stainless steel
XXXTXXAPA
Adjustable Pipe Adapter assembly
XXXTXXMB
Adjustable Mounting Base for Thermojacket
XXXTXXAR
Air Flow/Pressure Regulator Assembly
XXXSYSCS200MICON
MI Connection Box (necessary for MIH Sensor)
RAYMI310LTHCB8
MI3 Sensor, -40 to 600°C, 8 to 14 µm, D:S 10:1, 130 ms, 8 m cable
D82MIACAJ
Air Purge Jacket, stainless steel
XXXMIACAB
Adjustable Mounting Bracket
RAYTMP150HRR1
Kiln Scanner RAYTMP150HRR1
XXXSYSPS1
Industrial Power Supply Extra 240VAC/24VDC/2,5A
XXXSYSPHSS
Stainless Steel Protective Housing
XXXSYSECPI
Position Indicator
XXXSYSPHSW
Protective Window For SYSPHSS
XXXHSFIC4
High Speed Fiber-Optic/RJ45 Converter (4 canals)
XXXSYSCONNBOXHEAT
Heater System
XXXTMP150FSNPT
NPT Fitting Set
XXXTMP150FSISO
ISO Fitting Set
XXXTCSLRMMCONNBOX
LRM Remote Control box
MP150 SYSTEM ACCESSORIES - ES150, EC150, TF150 and GS150
RAYSYSSOFTWARE
MP150 systemsoftware DTDP
XXXSYSPS
Ind. Power Supply Standard 100VAC to 240VAC/24VDC/1.3A for DIN rail mounting
XXXSYSPS1
Industrial Power Supply 100VAC to 240VAC/24VDC/2.5A for DIN rail mounting
XXXETHBASICKIT
Basic Kit for Output Adding
XXXETH16DI
16-Channel Digital Input
XXXETH16DO
16-Channel Digital Output
XXXETH2AISO
Passive Current Isolator
XXXETH2AOC0
Analog Output Module 0-20 mA (2 each)
XXXETH2AOC4
Analog Output Module 4-20 mA (2 each)
XXETH2AOV
Analog Voltage Output Module
XXXETH2R
Output Relay (2 each)
Liên hệ & Báo giá chi tiết:
Sale ANS Vietnam:
thuyho@ansgroup.asia
Trực tiếp FaceBook
Trực tiếp Zalo: 0783698645
=====================================================
Click xem thêm ứng dụng sản phẩm khác
Đại lý phân phối chính hãng tại Vietnam
Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7
Xem thêm sản phẩm hãng RAYTEK tại đây
