tekhneport-40-–-ldpt-set-tekhne-viet-nam.png

TEKHNEPort 40 – LDPT set TEKHNE Việt Nam

TEKHNEPort 40 – LDPT set TEKHNE Việt Nam là thiết bị đo điểm sương cầm tay chuyên dụng cho các hệ thống cần kiểm soát độ ẩm thấp, với dải đo -60…+60 °Cdp và độ chính xác ±2 °Cdp

 

Thông tin TEKHNEPort 40 – LDPT set TEKHNE Việt Nam

Model: TEKHNEPort 40 – LDPT set
Hãng: TEKHNE
Xuất xứ: Japan
Loại: Handheld Dew Point Meter
Dải đo: -60…+60 °Cdp
Độ chính xác: ±2 °Cdp
Cảm biến: TEKHNE LDPT 40
Data Logging: Có
Giao tiếp: USB-C
Cấp bảo vệ: IP67
Bộ sản phẩm: Meter + Dew Point Sensor + 1 m Cable + Carrying Case + Test Report
Ứng dụng: Compressed Air / Air Dryer / Dry Room / Glove Box / N₂ / O₂ / H₂ / Battery Manufacturing / Heat Treatment / Industrial Gas.

Thông số TEKHNEPort 40 – LDPT set TEKHNE Việt Nam

Model: TEKHNEPort 40 – LDPT set
Hãng: TEKHNE
Xuất xứ: Japan
Loại: Handheld Dew Point Meter
Dải đo: -60…+60 °Cdp
Độ chính xác: ±2 °Cdp
Cảm biến: TEKHNE LDPT 40
Data Logging:
Giao tiếp: USB-C
Cấp bảo vệ: IP67
Bộ sản phẩm: Meter + Dew Point Sensor + 1 m Cable + Carrying Case + Test Report
Ứng dụng: Compressed Air / Air Dryer / Dry Room / Glove Box / N₂ / O₂ / H₂ / Battery Manufacturing / Heat Treatment / Industrial Gas.

Thuộc tính Thông số
Loại thiết bị Handheld Dew Point Meter
Model TEKHNEPort 40 – LDPT set
Hãng TEKHNE
Xuất xứ Japan
Dải đo Dew Point -60…+60 °Cdp
Độ chính xác ±2 °Cdp
Cảm biến TEKHNE LDPT 40
Kiểu cảm biến Polymer Dew Point Sensor
Kết nối cảm biến M12
Kết nối đường ống G1/2"
Áp suất cảm biến 0…8 MPa
Nhiệt độ cảm biến -40…+70°C
Độ ẩm cảm biến 0…100 %RH, không ngưng tụ
Thời gian đáp ứng Wet → Dry ≤5 phút
Thời gian đáp ứng Dry → Wet ≤20 giây
Data Logging
Bộ nhớ Tối đa khoảng 1.000.000 dữ liệu
Định dạng dữ liệu CSV
Giao tiếp USB-C
Nguồn 4 × AA / USB-C
Cấp bảo vệ IP67
Kích thước thân máy 170 × 78 × 38 mm
Khối lượng bộ cầm tay Khoảng 370 g
Cáp 1 m
Báo cáo kiểm tra Test Report

ng dụng thiết bị TEKHNE Việt Nam

  • Đo điểm sương khí nén
  • 🔹 Kiểm tra máy sấy khí hấp thụ
  • 🔹 Kiểm tra máy sấy lạnh
  • 🔹 Kiểm tra đường ống khí nén
  • 🔹 Dry Room trong sản xuất pin
  • 🔹 Glove Box
  • 🔹 Sản xuất pin Lithium-ion
  • 🔹 Kiểm soát độ ẩm trong thiết bị sản xuất
  • 🔹 Kiểm tra khí N₂
  • 🔹 Kiểm tra khí O₂
  • 🔹 Kiểm tra khí H₂
  • 🔹 Lò xử lý nhiệt
  • 🔹 Lò mạ
  • 🔹 Lò nung nhựa
  • 🔹 Tủ nhiệt
  • 🔹 Nghiên cứu & phát triển
  • 🔹 QA/QC công nghiệp

Xem thêm sản phẩm ANS Hanoi cung cấp

 

.1 100%  USA Origin Hubbell Heaters
Vietnam
Code : E06-3SSS Hubbell 6 Gallon Booster Heating Machine
6 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a stainless 316 steel storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam nsulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is eady for electrical and plumbing service connections.
1.2 100%  USA Origin Hubbell Heaters
Vietnam
Code : E10-3SSS Hubbell 10 Gallon Booster Heating Machine
10 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a stainless 316 steel storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam insulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is ready for electrical and plumbing service connections.
2.1 100%  USA Origin Hubbell Heaters
Vietnam
Code : E10A-3SSS Hubbell 10 Gallon Booster Heating Machine
10 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a 316L stainless steel ASME Stamped storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam insulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is ready for electrical and plumbing service connections.
2.2 100%  USA Origin Hubbell Heaters
Vietnam
Code : E06A-3SSS Hubbell 6 Gallon Booster Heating Machine
6 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a 316L stainless steel ASME Stamped storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam insulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is ready for electrical and plumbing service connections.