messotron-viet-nam-wlu-350-displacement-transducer.png

Messotron Việt Nam WLU 350 Displacement Transducer

Messotron Việt Nam WLU 350 Displacement Transducer cảm biến đo dịch chuyển tuyến tính cảm ứng thuộc WLU Series của Messotron Đức, sử dụng nguyên lý LVIT

 

Thông tin Messotron Việt Nam WLU 350 Displacement Transducer   

  • WLU 350 V – Cảm biến đo dịch chuyển tuyến tính cảm ứng (Inductive Linear Displacement Transducer – LVIT)

    Hãng sản xuất: Messotron GmbH
    Loại thiết bị: Cảm biến đo dịch chuyển tuyến tính cảm ứng (Inductive Linear Variable Inductive Transducer – LVIT)

Thông số Messotron Việt Nam WLU 350 Displacement Transducer

Đối với các ứng dụng đo hành trình dài trên van điều khiển hoặc xi lanh thủy lực, cảm biến cần đảm bảo:

  • Độ ổn định trong thời gian dài.
  • Sai số thấp trên toàn hành trình.
  • Chống rung và chống nhiễu điện từ.
  • Hoạt động liên tục trong môi trường nhiệt độ cao.
  • Tuổi thọ cao, ít bảo trì.

Nếu cảm biến không đủ độ chính xác sẽ gây:

  • Sai lệch vị trí van.
  • Điều khiển không ổn định.
  • Giảm hiệu suất hệ thống.
  • Gia tăng chi phí bảo trì.
  • Nguy cơ dừng dây chuyền sản xuất.

WLU 350 V được Messotron thiết kế để đáp ứng các yêu cầu này với nguyên lý đo cảm ứng không tiếp xúc, đảm bảo độ ổn định và độ tin cậy cao trong môi trường công nghiệp. 

Thông số kỹ thuật chính

Thuộc tính Thông số
Loại thiết bị Cảm biến đo dịch chuyển tuyến tính cảm ứng (LVIT)
Model WLU 350 V
Hãng Messotron GmbH
Dải đo danh định ±175 mm
Hành trình làm việc ±185 mm
Nguyên lý đo Linear Variable Inductive Transducer (LVIT)
Độ tuyến tính < ±1% FSO
Độ tuyến tính (vùng mở rộng) < ±1,5% FSO
Độ nhạy 1,84 mV/V/mm
Tần số kích thích 3 kHz
Điện áp kích thích Tối đa 22 V AC (RMS)
Trở kháng cuộn dây Khoảng 600 Ω
Nhiệt độ làm việc -50…+120°C (ngắn hạn đến +150°C)
Cấp bảo vệ IP65
Kết nối Axial hoặc Radial Connector (tùy phiên bản)
Cáp PTFE chống nhiễu, dài 2 m
Vật liệu thân Thép không gỉ Ø16 mm

Ứng dụng thiết bị Messotron Việt Nam 

  • Máy ép thủy lực
  • Máy cán thép
  • Máy dập
  • Máy CNC
  • Xi lanh thủy lực
  • Hệ thống servo
  • Thiết bị đo hành trình
  • Thiết bị thử nghiệm
  • Tự động hóa công nghiệp
  • Thiết bị OEM
  • Phòng nghiên cứu và phát triển (R&D)

Xem thêm sản phẩm ANS Hanoi cung cấp

Các model trong WLU Series

Model Hành trình đo
WLU 50 V ±25 mm
WLU 100 V ±50 mm
WLU 200 V ±100 mm
WLU 300 V ±150 mm
WLU 500 V ±250 mm

 

.1 100%  USA Origin Hubbell Heaters
Vietnam
Code : E06-3SSS Hubbell 6 Gallon Booster Heating Machine
6 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a stainless 316 steel storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam nsulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is eady for electrical and plumbing service connections.
1.2 100%  USA Origin Hubbell Heaters
Vietnam
Code : E10-3SSS Hubbell 10 Gallon Booster Heating Machine
10 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a stainless 316 steel storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam insulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is ready for electrical and plumbing service connections.
2.1 100%  USA Origin Hubbell Heaters
Vietnam
Code : E10A-3SSS Hubbell 10 Gallon Booster Heating Machine
10 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a 316L stainless steel ASME Stamped storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam insulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is ready for electrical and plumbing service connections.
2.2 100%  USA Origin Hubbell Heaters
Vietnam
Code : E06A-3SSS Hubbell 6 Gallon Booster Heating Machine
6 Gallons
3 kW @ 240 Voltage 1 Phase
Electric Water Heater with a 316L stainless steel ASME Stamped storage tank rated at 150psi. High efficiency design includes 2” thick polyurethane foam insulation to minimize stand by heat loss. Jacket is colorized plastic composite which cannot rust or corrode and is dent/scratch resistant. Unit is ready for electrical and plumbing service connections.